Australia version. Built around the NBN: the typical evening speed (7pm to 11pm) the ACCC asks retailers to advertise, its four plan labels, and Measuring Broadband Australia results. US version

NBN Download Time Calculator

How long a game, film or backup takes on the NBN, using the typical evening speed (7pm to 11pm) retailers advertise and the ACCC speed labels, in Mbps and MB/s.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Download Time Calculator?

Under ACCC guidance, NBN retailers should advertise the typical speed of each plan during the busy evening period of 7pm to 11pm. That evening figure is the right number to enter here for a download you start after dinner. The ACCC also gives four labels: Basic Evening Speed (less than 15 Mbps), Standard (at least 15), Standard Plus (at least 30) and Premium (at least 60).

How close do real lines get? The ACCC's final Measuring Broadband Australia report (June 2026) found fixed-line NBN households received on average 99.4% of their plan's download speed in busy hours, up from the 80 to 85% the program measured in its early reports. So on a fixed-line connection a speed test result near the plan speed is normal, and the overhead allowance can be small.

Enter the file size and your plan or speed-test result in Mbps, set the overhead (around 5% on a wired fixed-line connection, more on Wi-Fi), and read the time. Switch to Speed needed to see which tier would finish a transfer by a deadline.

  • Decimal (GB) and binary (GiB) file sizes
  • Bit and byte based speeds, from bit/s to Gbit/s and MB/s
  • Overhead allowance with best-case comparison
  • Reverse mode for the speed needed to meet a deadline
  • Table of common connection speeds; copy and share
Read the guide: Speed, Distance and Download Time: Getting Rates Right

Updated

How to use the Download Time Calculator

  1. Enter the file size and choose its unit. Use GB for sizes from a website or store, GiB if the number came from your operating system or a tool that counts in 1024s.
  2. Enter the connection speed in Mbit/s from your plan or a speed test, or pick a preset. Choose MB/s if your download manager shows bytes.
  3. Set the overhead percentage: 0% for the theoretical minimum, about 10% for a realistic wired estimate.
  4. Read the transfer time, the no-overhead best case, the effective throughput and the table of other speeds.
  5. For a deadline, switch to "Speed needed", enter the target time and read the required line rate.

Worked examples

A 50 GB game on each ACCC evening label

Input

50 GB at 15, 30 and 60 Mbps, 5% overhead

Output

15 Mbps: 7 h 47 min 50 s; 30 Mbps: 3 h 53 min 55 s; 60 Mbps: 1 h 56 min 58 s

Each step up the ACCC labels halves the wait. On a Basic Evening Speed plan, a large game is an overnight job.

Fixed Wireless Home Fast in busy hours

Input

50 GB, 160.5 Mbps, 0% overhead

Output

41 min 32 s

The final Measuring Broadband Australia report measured an average busy-hour download of 160.5 Mbps on the Fixed Wireless Home Fast plan. Because that is measured throughput, no overhead is added.

Uploading 20 GB of video on the same plan

Input

20 GB, 12.6 Mbps upload, 0% overhead

Output

3 h 31 min 38 s

The same report measured 12.6 Mbps average busy-hour upload on Home Fast fixed wireless. Upload, not download, sets how long a cloud backup takes.

Background and insight

Transfer time is size in bits divided by the usable rate: time = (bytes × 8) ÷ (line rate × (1 − overhead)). The factor of 8 is the step people forget. A 100 Mbit/s connection moves at most 12.5 megabytes per second, so a 1 GB file needs 80 seconds at best, not 10.

Storage and network units also use different prefixes. Network rates are always decimal (1 Mbit/s = 1,000,000 bits per second). Drive makers sell decimal gigabytes (10⁹ bytes), but many operating systems report sizes in binary units (1 GiB = 1,073,741,824 bytes) while labelling them "GB". The IEC 80000-13 prefixes KiB, MiB and GiB were introduced to remove that ambiguity. The difference is 7.4% at the giga level and 10% at tera: a "5 GB" file shown by Windows is 5 GiB, which takes 429 seconds at 100 Mbit/s rather than 400.

Overhead covers what the advertised rate does not deliver as file data: Ethernet, IP and TCP headers (roughly 3 to 6% on full-size packets), Wi-Fi contention and retransmissions, encryption, and the server or disk at the other end. A 5 to 15% allowance suits a good wired connection; Wi-Fi and busy networks can lose far more. The slowest link in the chain sets the real speed, so a 1 Gbit/s plan does not help when the server sends at 50 Mbit/s.

Common use cases

  • Before a big download

    Know whether a game, OS image or dataset will finish overnight or before a flight.

  • Backup and sync planning

    Estimate how long an initial cloud backup or offsite copy will take on your upload speed.

  • Choosing a plan

    Compare what 100, 300 or 1,000 Mbit/s would mean for the files you actually move.

  • Network projects

    Size a link for a migration window or a nightly replication job.

Tips and limitations

  • Enter a speed-test result rather than the plan name if you have one; test wired, between 7pm and 11pm, to match the advertised figure.
  • A speed test reports throughput already, so set the overhead close to 0% when you use one. Keep 5 to 10% when you enter the plan speed.
  • NBN Co overprovisions fixed-line downloads slightly, which is why some speed tests read a little above plan speed (ACCC). It does not overprovision fixed-line uploads.
  • Many game launchers show MB/s; multiply by 8 to compare with your plan in Mbps.

Sources and further reading

  1. Broadband speeds, Australian Competition and Consumer Commission. Busy evening period 7pm to 11pm and the four evening speed labels.
  2. Households receive consistent broadband speeds on fixed-line and wireless plans, ACCC (17 June 2026). Final MBA report: 99.4% of plan speed in busy hours on fixed line; Fixed Wireless Home Fast 160.5 Mbps down, 12.6 Mbps up; overprovisioning.
  3. Measuring Broadband Australia: final performance report, ACCC. Report 33, June 2026.

Frequently asked questions

Which NBN speed should I enter?

The typical evening speed your retailer advertises for 7pm to 11pm, or better, your own speed test in that window. The ACCC asks retailers to advertise that busy-period figure for each NBN plan.

How long does a 50 GB game take to download on the NBN?

With 5% overhead: about 7 hours 48 minutes at 15 Mbps, 3 hours 54 minutes at 30 Mbps and 1 hour 57 minutes at 60 Mbps, the floors of the ACCC Standard, Standard Plus and Premium evening labels.

Do NBN plans really deliver their speed at night?

On fixed-line connections, largely yes: the ACCC's final Measuring Broadband Australia report (June 2026) found an average of 99.4% of plan download speed in busy hours. Wi-Fi in the home and the server at the far end can still slow a download.

What do Basic, Standard, Standard Plus and Premium Evening Speed mean?

They are ACCC labels for typical evening speeds: Basic is less than 15 Mbps, Standard at least 15, Standard Plus at least 30 and Premium at least 60 Mbps, each suited to heavier use.

Why is my upload so much slower than my download?

NBN plans are asymmetric, and fixed-line uploads are not overprovisioned. On Fixed Wireless Home Fast the ACCC measured 160.5 Mbps down but 12.6 Mbps up in busy hours, so a backup can take ten times longer than a download of the same size.

Is Mbps the same as MB/s?

No. NBN plans are sold in megabits per second; a megabyte is eight megabits, so a 100 Mbps plan moves at most 12.5 MB/s.

Is there an in-depth guide to the Download Time Calculator?

Yes. “Speed, Distance and Download Time: Getting Rates Right” covers the background, how it works, common pitfalls and worked examples. Read the full guide.