Australia version. Kilometre-first, with worked examples for a 5K and the 14 km City2Surf, and healthdirect advice on building distance and running in the heat. US version
Running Pace Calculator (Australia)
Work out pace per kilometre, finish times and splits for a 5K, 10K, the 14 km City2Surf or a marathon, with race predictions from a recent result.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Running Pace Calculator?
Australian runners train and race in kilometres, so this version leads with pace per km and treats miles as the conversion. Enter any two of distance, time and pace and it gives the third, with kilometre splits, speed for the treadmill and a 400 m lap time for track sessions.
Not every race is a standard distance. The City2Surf runs 14 km from the Sydney CBD to Bondi, so a goal of 1:30:00 needs 6:26 per km, and the course includes Heartbreak Hill. Type 14 into the distance box instead of using a preset, and remember that a pace calculator assumes flat ground: hold effort on the climb and let the pace drop, then make it back on the descent.
- Solve for pace, time or distance
- min/km and min/mile at once, plus km/h, mph and 400 m lap time
- Presets for mile, 5K, 10K, half marathon and marathon
- Even-pace split table by km or mile
- Riegel race predictions from 1500 m to the marathon
Updated
How to use the Running Pace Calculator
- Pick Pace, Finish time or Distance under Calculate.
- Enter the two known values. Use the preset buttons for common race distances, and the unit menus to switch between km, miles and metres or between per km and per mile.
- Read pace per km and per mile, finish time, distance, speed and lap time.
- Switch the split table between kilometres and miles to see cumulative times at every marker.
- Check the Riegel predictions if your input was a real race effort, then copy a summary or link.
Worked examples
City2Surf in 90 minutes
Input
Distance 14 km, time 1:30:00
Output
6:26 per km, 10:21 per mile, 9.33 km/h
Even splits put you through 7 km at 45:00. Because the hill sits in the course, a realistic plan is a little quicker than 6:26 on the flat sections so that the climb does not cost the goal.
From a 28-minute 5K to longer races
Input
Distance 5 km, time 28:00
Output
5:36 per km; predicted 10K 58:23, 15K 1:29:43, half marathon 2:08:48
The 14 km City2Surf sits just under the 15K row, and the same Riegel formula gives about 1:23 for a flat 14 km. On the real course, with its climb, expect slower.
A 30-minute 5K
Input
Distance 5 km, time 30:00
Output
6:00 per km, 9:39 per mile, 10.0 km/h, 400 m lap 2:24.0
Each kilometre marker should come up on the 6-minute mark: 12:00 at 2 km, 18:00 at 3 km.
Background and insight
Pace is time divided by distance, so the arithmetic is simple; the traps are units. A mile is exactly 1,609.344 m, so a pace per mile is 1.609344 times the pace per kilometre: 5:00 per km is 8:02.8 per mile, which displays as 8:03. The official half marathon is 21.0975 km and the marathon 42.195 km, the distance fixed for the 1908 London Olympics and adopted as standard in 1921.
Peter Riegel, a research engineer and marathoner, published his endurance model in Runner's World in 1977 and in American Scientist in 1981: T2 = T1 × (D2 / D1)^1.06. The exponent above 1 captures the fact that pace slows as distance rises. It fits well between about 3.5 minutes and 4 hours of running for trained athletes. For less experienced runners the marathon prediction is usually optimistic, because fuelling, heat and training volume start to matter more than raw speed.
Even splits are the default because evidence from world record runs shows that near-even or slightly negative pacing is most economical for distances over 1500 m. Most recreational runners start too fast; a split table is a simple guard against that.
Common use cases
Race-day pacing plan
Turn a goal time into km or mile splits to check on your watch during the race.
Choosing a realistic goal
Use a recent 5K or 10K to predict a half marathon or marathon before committing to a target.
Treadmill speed
Convert a road pace into km/h or mph to set the treadmill.
Track sessions
Read the 400 m lap time for a target 5K or mile pace.
Tips and limitations
- healthdirect advises increasing your distance by no more than 10% a week. Going from 20 km a week to 22 km is that limit.
- healthdirect suggests drinking extra water before and after running, carrying water if you can, and wearing sunscreen and a hat.
- Australia's guidelines for adults are 75 to 150 minutes of intense activity a week, or 150 to 300 minutes of moderate activity. Three 30-minute runs come to 90 minutes.
- Race predictions assume similar weather and terrain. A result from a cool morning on a flat course will overpredict a hot, hilly race.
Sources and further reading
- Voltaren City2Surf, City2Surf. The 14 km course from the Sydney CBD to Bondi, including Heartbreak Hill.
- Running tips, healthdirect Australia. Increase distance by no more than 10% a week; water, sunscreen and a hat in the heat.
- Cardiovascular exercise, healthdirect Australia. Adult guidelines of 2 hours 30 minutes to 5 hours of moderate or 1 hour 15 minutes to 2 hours 30 minutes of intense activity a week.
- Book of Rules, World Athletics
Frequently asked questions
What pace do I need for the City2Surf in under 90 minutes?
An average of 6:26 per kilometre over 14 km gives 1:30:00. Aim a few seconds per km faster on the flat sections so that Heartbreak Hill does not cost you the goal.
How do I predict my City2Surf time from a 5K?
Enter your 5K result and read the 15K row: the 14 km time is a little less than that. From a 28-minute 5K the table gives 1:29:43 for 15K, and Riegel gives about 1:23 for a flat 14 km. Treat it as a best case for a hilly course.
How fast should I increase my running distance each week?
healthdirect's running advice is no more than 10% a week, with a warm-up and cool-down around each run. If you ran 30 km this week, 33 km is the ceiling for next week.
How much running meets Australia's physical activity guidelines?
For adults, healthdirect gives 1 hour 15 minutes to 2 hours 30 minutes of intense activity a week, meaning high-energy, high-effort exercise, or 2 hours 30 minutes to 5 hours of moderate activity. Count each run in whichever group matches how hard it felt.
What is 6 minutes per km in minutes per mile?
9:39 per mile, from 360 seconds multiplied by 1.609344. It is 10 km/h on a treadmill.
Should I run slower on hot days?
Yes. Heat raises the effort of any given pace, so keep the effort and accept a slower time. Drink before and after the run, and stop and get help if you feel unwell.
Is there an in-depth guide to the Running Pace Calculator?
Yes. “Training Numbers Explained: Pace, Heart Rate Zones, 1RM and METs” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.