Canada version. Heating oil and propane in litres, natural gas in m³ or GJ, electric backup for cold snaps, prices in CA$, and ECCC's grid intensity for your province. US version

Heat Pump Savings Calculator (Canada)

Compare a cold-climate heat pump with an oil or gas furnace or baseboards in CA$: oil in litres, gas in m³ or GJ, backup heat and your province's grid intensity.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Heat Pump Savings Calculator?

In Canada the heat pump answer depends on what you heat with now. Replacing a heating oil furnace usually saves money and a lot of CO2, because oil is expensive per unit of heat. Replacing a high-efficiency natural gas furnace often costs more to run at current prices, especially in Alberta, where gas is cheap and the grid is still fossil-heavy.

Cold snaps matter too. Even cold-climate heat pumps lose capacity at very low temperatures, so most Canadian installations keep backup heat (electric strips or the existing furnace). Enter the share of the season's heat that the backup supplies; it depends on your climate and how the system is sized, so ask the installer for their estimate. The examples use 10 to 15%.

The federal Oil to Heat Pump Affordability program stopped taking applications on July 31, 2026. Enter any provincial or utility rebate you have confirmed in the incentives field.

  • Gas, oil, propane and electric resistance baselines
  • Heat demand from fuel bills or a known heat load
  • Seasonal COP or HSPF2 input with backup heat share
  • Payback, break-even prices and cost per kWh of heat
  • CO₂e comparison and a COP sensitivity table
Read the guide: Heat Pump vs Gas Furnace: Running Costs and Payback

Updated

How to use the Heat Pump Savings Calculator

  1. Choose your current fuel. Typical defaults for unit, price and efficiency fill in and can be changed.
  2. Enter how much fuel you use for heating a year (winter bills minus summer use for gas) or, if you know it, the heat load in kWh.
  3. Enter the heat pump's seasonal COP, or switch to HSPF2 and enter the rating, plus the share of heat from backup strips.
  4. Enter your electricity price, the installed cost and any rebates, and pick your grid region for CO₂.
  5. Read the yearly costs, saving, payback, break-even prices and the COP sensitivity table.

Worked examples

Oil furnace in Nova Scotia

Input

2,800 L of oil at $1.55/L, 80% furnace, SCOP 2.6, 10% backup, $0.19 per kWh, $18,000 installed

Output

Oil $4,340 a year, heat pump $2,036; saving $2,304; payback 7.8 years; CO2 7.58 t vs 6.73 t

The money saving is large, but on Nova Scotia's grid (628 g per kWh) the CO2 cut is small. The same switch in Quebec saves $3,483 a year at $0.08 per kWh and cuts CO2 to 28 kg.

Gas furnace in Ontario

Input

2,200 m³ at $0.45 all-in, 95% furnace, SCOP 2.6, 10% backup, $0.13 per kWh

Output

The heat pump costs $310 a year more; it breaks even below $0.099 per kWh

A 95% gas furnace is hard to beat on price. The heat pump still cuts CO2 from 4.28 t to 0.73 t on Ontario's grid.

Gas billed in GJ in Alberta

Input

80 GJ at $8 per GJ all-in, 95% furnace, SCOP 2.4, 15% backup, $0.20 per kWh

Output

Gas $640 a year, heat pump $2,129; CO2 4.03 t vs 3.68 t

Electricity would have to cost 6 cents per kWh to match gas here. On Alberta's grid the CO2 difference is small, though it grows as the grid cleans up.

Background and insight

The useful heat delivered by your current system is fuel used x energy per unit x efficiency. Energy contents come from the EIA: a therm is 100,000 Btu (29.31 kWh), a gallon of heating oil 138,500 Btu (40.59 kWh), a gallon of propane 91,452 Btu (26.80 kWh), and natural gas averages 1,036 Btu per cubic foot. Efficiency is the AFUE on the furnace or boiler label: about 80% for a standard gas furnace, 90% to 98% for condensing models, and 100% for electric resistance.

A heat pump moves heat rather than making it, so it delivers more heat than the electricity it uses. The ratio over a heating season is the seasonal coefficient of performance (SCOP). US ratings are given as HSPF2 in Btu of heat per watt-hour of electricity; dividing by 3.412 converts it to an average COP, so HSPF2 8.1 is about 2.4. HSPF2 is calculated for a moderate climate (DOE region IV), and real seasonal COP is lower in very cold places and higher in mild ones. On the coldest days many systems use electric resistance backup strips, which run at COP 1; the backup share setting accounts for that.

Payback is the net installed cost divided by the yearly saving. Federal incentives changed in 2025: the One Big Beautiful Bill Act ended the section 25C energy efficient home improvement credit for property placed in service after 31 December 2025, so the incentives field defaults to zero. Many states and utilities still offer rebates. CO₂ uses EPA Emission Factors Hub 2025 factors for the fuels and your eGRID region's rate for electricity.

Common use cases

  • Deciding on a heat pump

    Get a running-cost answer from your own bills before talking to installers.

  • Replacing an old furnace or boiler

    Compare a like-for-like replacement with switching fuels when the old system fails.

  • Checking an installer's savings claim

    Put the quoted COP and price in and see whether the promised savings hold up.

  • Comparing fuels

    See the cost per kWh of delivered heat for gas, oil, propane and electricity side by side.

Tips and limitations

  • Use only the oil or gas used for space heating; subtract summer use for hot water if the heat pump will not replace the water heater.
  • Ask the contractor for the system's seasonal performance at your design temperature, not its rating at 8°C.
  • Count the delivery charges in your gas price; they make up a large share of the bill in most provinces.

Sources and further reading

  1. Oil to Heat Pump Affordability program, Government of Canada. Closed to applications July 31, 2026; up to $10,000; work deadline January 31, 2027.
  2. Emission factors and reference values, Environment and Climate Change Canada. Electricity consumption intensity by province.
  3. Units and calculators explained, US Energy Information Administration. Heat content of heating oil, propane and natural gas.

Frequently asked questions

Is the Oil to Heat Pump Affordability grant still available?

Not for new applicants. The last day to apply was July 31, 2026, and applications submitted by then are still being processed. The federal program page sets out terms for Alberta, Manitoba, the Northwest Territories, Quebec and Saskatchewan, with an upfront payment of up to $10,000; work must be finished and paid for, and final receipts and the attestation form uploaded, by January 31, 2027. Residents of other provinces and territories are pointed to a separate participating-provinces page.

Do heat pumps work in a Canadian winter?

Cold-climate models are built to keep heating in deep cold, but their output and efficiency fall as the temperature drops. That is why the tool asks for a backup share and a seasonal COP rather than a rated COP.

Will a heat pump save money compared with natural gas?

Compare the cost of a kWh of heat. With a 95% furnace, gas at $0.45 per m³ gives heat at about 4.4 cents per kWh; a heat pump with SCOP 2.6 and $0.13 electricity gives about 5.8 cents. Lower power prices or a less efficient furnace flip the result.

How do I enter propane?

Choose propane and litres, and enter the litres delivered for heating in a year with your price per litre.

How much CO2 does switching from oil save?

It depends on the province. Replacing 2,800 L of oil saves almost all of its 7.6 t in Quebec, but less than a tonne in Nova Scotia, where the electricity is mostly from fossil fuels.

Is there an in-depth guide to the Heat Pump Savings Calculator?

Yes. “Heat Pump vs Gas Furnace: Running Costs and Payback” covers the background, how it works, common pitfalls and worked examples. Read the full guide.