Canada version. Applies the Canada.ca Content Style Guide: aim for sentences under 15 to 20 words and short paragraphs, and treat formula scores as a check rather than proof. US version

Readability Checker (Canada)

Check plain language the Canada.ca way: sentences over 15 to 20 words, passive voice and wordy phrases flagged, with grade scores you should not rely on alone.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Readability Checker?

In the federal government plain language is not a style choice. The Canada.ca Content Style Guide says you must use plain language because the Directive on the Management of Communications requires it, and it gives the reason: according to Statistics Canada (2012) and Canadian literacy organizations, almost 50% of Canadians have literacy challenges.

The guide is also blunt about tools like this one. Readability formulas measure things like word length and cannot tell you whether your audience will understand and use your content, so you should not rely on them to judge readability. Use the scores here to find the sentences that need work, then fix them by the guide's rules: break up long sentences (it puts the optimum under 15 to 20 words), keep each paragraph to one idea and no more than three sentences, and prefer common words.

The checker marks sentences of 14 words or more that score as hard, underlines passive voice and suggests plainer words for phrases such as "in order to", "facilitate" and "prior to".

  • Flesch Reading Ease and Flesch-Kincaid Grade Level
  • Gunning Fog, SMOG, Coleman-Liau and Automated Readability Index
  • Hard and very hard sentence highlighting
  • Passive voice, -ly adverb and wordy phrase detection with plainer alternatives
  • Target reading level check and copyable score summary
  • Private: scoring runs in your browser
Read the guide: Readability Formulas Explained: Flesch, Fog, SMOG and More

Updated

How to use the Readability Checker

  1. Paste at least a paragraph of English text. A hundred words or more gives stable scores; SMOG expects 30 sentences.
  2. Read the six scores. Reading Ease runs from about 0 to 100 (higher is easier); the other five are US school grades.
  3. Choose a target level. Grade 8 suits most web pages; grade 6 is the usual advice for health and public information.
  4. Work through the highlighted text. Split amber and red sentences, rewrite underlined passive verbs in the active voice, and swap green phrases for the suggestion shown on hover.
  5. Watch the scores update as you edit, then copy the summary for your brief or style review.

Worked examples

A program notice, before and after

Input

Before: "Applicants are advised that, in order to facilitate the timely processing of their application, all required supporting documentation must be submitted prior to the deadline indicated in the notification letter."

Output

30 words in one sentence; Flesch Reading Ease 1.5; Flesch-Kincaid grade 20.5; marked very hard, with two passives and three wordy phrases

Rewritten as "Send all your documents before the deadline in your letter. We can then process your application on time." the text has 18 words in two sentences, Reading Ease 70.8 and grade 5.6. Both sentences are now under the guide's 15-word end of the range.

Using the target without trusting it blindly

Input

Target grade 8 for a public web page

Output

On target when Flesch-Kincaid is 8.0 or lower

The Canada.ca guide does not give a grade target; it tells writers to consider their audience's reading level and literacy needs. A low grade is a good sign, but test the page with real readers if it matters.

Background and insight

Readability formulas were built in the mid-twentieth century by regressing reading test results against simple text features. Rudolf Flesch published Reading Ease in 1948: 206.835 − 1.015 × (words per sentence) − 84.6 × (syllables per word), on a scale where 60 to 70 is plain English and below 30 is very difficult. In 1975 J. Peter Kincaid and colleagues re-fitted the same two inputs for US Navy enlisted personnel to give a school grade: 0.39 × (words per sentence) + 11.8 × (syllables per word) − 15.59. That is the grade Microsoft Word reports.

The others use different proxies for hard words. Robert Gunning's Fog index (1952) counts words of three or more syllables, excluding proper nouns, hyphenated compounds and words that only reach three syllables through -es, -ed or -ing. G. Harry McLaughlin's SMOG (1969) counts polysyllables per 30 sentences and is widely used for health materials because it was validated against 100% comprehension. Coleman-Liau (1975) and the Automated Readability Index (Smith and Senter, 1967) use letters per word instead of syllables, which made them easy for early computers and typewriter counters.

Every formula measures length, not meaning. Short words in short sentences score well even when the ideas are muddled, and a necessary technical term can push the grade up. The scores are best used to compare drafts of the same text and to find the sentences that need work. This tool estimates syllables with English spelling rules plus an exception list, which agrees with dictionary counts for about 95% of common words, so scores can differ by a point or so from other checkers.

Common use cases

  • Web and product copy

    Keep help pages, onboarding and error messages around grade 6 to 8 so most visitors read them in one pass.

  • Health and public information

    Check patient leaflets and consent forms against the grade 6 to 8 level that health literacy guidance recommends.

  • Plain language compliance

    Find wordy phrases and passive voice when writing to the US Plain Writing Act or a house style guide.

  • Teaching and grading

    Match passages to a class reading level, or show students how sentence length changes a score.

  • Policies, contracts and insurance

    Measure Reading Ease where a regulator or client sets a minimum score for consumer documents.

Tips and limitations

  • Start with the sentences marked very hard and split them; most of the score comes from sentence length.
  • Keep each paragraph to one main idea and no more than three sentences, as the Canada.ca guide asks.
  • Keep a technical term if your readers use it, and define it the first time.
  • If your content will also appear in French, edit the English for plain language first; the formulas here are for English only.

Sources and further reading

  1. Canada.ca Content Style Guide, Government of Canada. Sections 1.2 (readability and literacy), 2.0 (plain language requirement), 2.1 (do not rely on readability tools), 2.6 (short sentences and paragraphs)
  2. Skills in Canada: First Results from PIAAC, Statistics Canada. The 2012 adult skills survey behind the literacy figure the style guide cites; more adults at Level 1 or below in 2012 than in 2003

Frequently asked questions

Is plain language required for Government of Canada content?

Yes. The Canada.ca Content Style Guide says you must use plain language, as it is a requirement of the Directive on the Management of Communications, and adds that plain language does not oversimplify or strip meaning from content.

How long should sentences be on Canada.ca?

The guide says to break up long sentences, with the optimum under 15 to 20 words, and to keep paragraphs to one main idea and no more than three sentences.

Should I rely on a readability score?

Not on its own. The Canada.ca guide says readability tools measure things like word length and cannot tell you whether your audience will find your content easy to understand and use. Use the score to find problem sentences, then test with readers.

Why does plain language matter so much in Canada?

The guide cites Statistics Canada (2012) and Canadian literacy organizations: almost 50% of Canadians have literacy challenges.

Do Canadian spellings change the score?

Slightly. The formulas count letters and estimated syllables, so "colour" (one more letter) and "centre" (counted as one syllable by the rules, against two for the US spelling) can move a score by a fraction of a grade. Compare drafts written in the same spelling.

Is there an in-depth guide to the Readability Checker?

Yes. “Readability Formulas Explained: Flesch, Fog, SMOG and More” covers the background, how it works, common pitfalls and worked examples. Read the full guide.