United Kingdom version. Built around UK broadband: the average peak-time speed ads must quote, the 10 down and 1 up Mbit/s Universal Service Obligation floor, and slow uploads on part-fibre lines. US version

Download Time Calculator (UK broadband)

How long a game, film or backup takes on UK broadband, using the average peak-time speed providers advertise and the 10 Mbit/s USO floor, in Mbit/s and MB/s.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Download Time Calculator?

UK broadband adverts quote an average speed, and under the advertising guidance from CAP and BCAP that figure should be achievable by at least half of the provider's customers at peak time, which Ofcom defines as 8pm to 10pm. That makes the advertised average a fair figure to put into this calculator for an evening download. It is not a floor: up to half of customers get less.

The other number to know is the broadband Universal Service Obligation. Since March 2020 premises have had a legal right to request a decent connection of at least 10 Mbit/s download and 1 Mbit/s upload, subject to eligibility. If your line sits near that floor, uploads are the problem, as the second example shows.

Enter the file size and your speed, keep an overhead allowance of around 10% for a wired connection, and the tool gives the time and the speed you would need to finish by a deadline. Speeds stay in megabits per second (Mbit/s), as UK providers sell them, with the MB/s figure your games launcher or browser shows next to it.

  • Decimal (GB) and binary (GiB) file sizes
  • Bit and byte based speeds, from bit/s to Gbit/s and MB/s
  • Overhead allowance with best-case comparison
  • Reverse mode for the speed needed to meet a deadline
  • Table of common connection speeds; copy and share
Read the guide: Speed, Distance and Download Time: Getting Rates Right

Updated

How to use the Download Time Calculator

  1. Enter the file size and choose its unit. Use GB for sizes from a website or store, GiB if the number came from your operating system or a tool that counts in 1024s.
  2. Enter the connection speed in Mbit/s from your plan or a speed test, or pick a preset. Choose MB/s if your download manager shows bytes.
  3. Set the overhead percentage: 0% for the theoretical minimum, about 10% for a realistic wired estimate.
  4. Read the transfer time, the no-overhead best case, the effective throughput and the table of other speeds.
  5. For a deadline, switch to "Speed needed", enter the target time and read the required line rate.

Worked examples

Uploading phone videos on a USO-level line

Input

2 GB, 1 Mbit/s upload, 10% overhead

Output

4 h 56 min 18 s (4 h 26 min 40 s at the full line rate)

At the 1 Mbit/s USO upload floor a single evening of holiday video takes about five hours to back up, so set cloud photo sync to run overnight on a line like this.

The same line downloading a 5 GB update

Input

5 GB, 10 Mbit/s, 10% overhead

Output

1 h 14 min 4 s; 9 Mbit/s effective

The download floor is ten times the upload, so the same connection is far more usable for downloads than for backups.

A 100 GB game at an advertised 67 Mbit/s average

Input

100 GB, 67 Mbit/s, 10% overhead

Output

3 h 41 min 7 s; 60.3 Mbit/s effective

Use the average from your provider's advert or contract summary. Because up to half of customers can get less than the advertised average at peak time, give an evening download extra time or start it after 10pm.

Speed to finish a 25 GB transfer in an hour

Input

Speed needed; 25 GB in 1 h 0 min 0 s, 10% overhead

Output

About 61.73 Mbit/s of line rate

Compare this with the average speed in each provider's offer when you are choosing a package for home working.

Background and insight

Transfer time is size in bits divided by the usable rate: time = (bytes × 8) ÷ (line rate × (1 − overhead)). The factor of 8 is the step people forget. A 100 Mbit/s connection moves at most 12.5 megabytes per second, so a 1 GB file needs 80 seconds at best, not 10.

Storage and network units also use different prefixes. Network rates are always decimal (1 Mbit/s = 1,000,000 bits per second). Drive makers sell decimal gigabytes (10⁹ bytes), but many operating systems report sizes in binary units (1 GiB = 1,073,741,824 bytes) while labelling them "GB". The IEC 80000-13 prefixes KiB, MiB and GiB were introduced to remove that ambiguity. The difference is 7.4% at the giga level and 10% at tera: a "5 GB" file shown by Windows is 5 GiB, which takes 429 seconds at 100 Mbit/s rather than 400.

Overhead covers what the advertised rate does not deliver as file data: Ethernet, IP and TCP headers (roughly 3 to 6% on full-size packets), Wi-Fi contention and retransmissions, encryption, and the server or disk at the other end. A 5 to 15% allowance suits a good wired connection; Wi-Fi and busy networks can lose far more. The slowest link in the chain sets the real speed, so a 1 Gbit/s plan does not help when the server sends at 50 Mbit/s.

Common use cases

  • Before a big download

    Know whether a game, OS image or dataset will finish overnight or before a flight.

  • Backup and sync planning

    Estimate how long an initial cloud backup or offsite copy will take on your upload speed.

  • Choosing a plan

    Compare what 100, 300 or 1,000 Mbit/s would mean for the files you actually move.

  • Network projects

    Size a link for a migration window or a nightly replication job.

Tips and limitations

  • Run a speed test between 8pm and 10pm, wired to the router, if you want to check what your line delivers when it matters.
  • Check the upload figure separately: it is often far lower than the download, and backups and video calls depend on it.
  • For a whole-home Wi-Fi network, enter a speed measured on the device you are using, not the line speed.
  • Games consoles and launchers usually show MB/s. Multiply by 8 to compare with an advertised Mbit/s figure.

Sources and further reading

  1. Reviewing the broadband Universal Service Obligation, Department for Science, Innovation and Technology. USO launched March 2020: a right to request at least 10 Mbit/s download and 1 Mbit/s upload, subject to eligibility.
  2. Broadband speed claims: Advertising Guidance, CAP and BCAP (ASA). Numerical speed claims should be achievable by at least 50% of customers at peak time, defined by Ofcom as 8pm to 10pm, and described as an average.
  3. Definitions of the SI units: the binary prefixes, NIST. GB against GiB when a file size comes from your operating system.

Frequently asked questions

Which broadband speed should I enter?

The average speed your provider advertises is a fair evening estimate, because CAP and BCAP guidance says it should be achievable by at least 50% of customers at peak time (8pm to 10pm). A speed test on your own line is better still.

What is the minimum broadband speed I am entitled to in the UK?

Under the broadband Universal Service Obligation, launched in March 2020, premises can request a decent connection of at least 10 Mbit/s download and 1 Mbit/s upload, subject to eligibility criteria.

How long does a 100 GB game take on UK broadband?

At an advertised average of 67 Mbit/s with 10% overhead, about 3 hours 41 minutes. At 500 Mbit/s it is about 30 minutes, and at 900 Mbit/s about 16 minutes, on a wired connection.

Why is my evening download slower than the advertised speed?

The advertised figure is an average that at least half of customers reach at peak time, so many lines run below it in the evening. Wi-Fi, other devices and the server at the far end take a further share.

How long does it take to upload 2 GB on a 1 Mbit/s connection?

About 4 hours 27 minutes at the full line rate, or just under 5 hours with a 10% overhead allowance.

Is Mb the same as MB?

No. UK broadband is sold in megabits per second; a megabyte is eight megabits. A 67 Mbit/s line moves at most about 8.4 MB/s.

Is there an in-depth guide to the Download Time Calculator?

Yes. “Speed, Distance and Download Time: Getting Rates Right” covers the background, how it works, common pitfalls and worked examples. Read the full guide.