United Kingdom version. Written for the UK: the legal Gas Safe requirement, Part P for electrical work, building regulations completion certificates, TrustMark, and section 75 on a card deposit. US version
Hiring a Tradesperson Checklist (UK)
Gas work must be Gas Safe registered by law and most electrical work needs Part P certification. Check the register yourself, then get it in writing.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Hiring a Tradesperson Checklist?
Two UK trades are legally gated and the rest are not, which is the distinction that should drive how carefully you check. Anyone working on gas appliances or pipework must be Gas Safe registered by law, and you can check the register yourself using the engineer’s number rather than taking a van livery on trust. Most domestic electrical work falls under Part P of the building regulations and should be certified by a competent person scheme member.
For everything else, "registered" and "certified" mean whatever the trader wants them to mean. There is no legal register of plumbers, builders, roofers or decorators, so a logo on a website proves nothing on its own. TrustMark is the government-endorsed quality scheme and is a genuine signal; a made-up association is not.
The third thing that decides how this ends is paperwork before work starts: a written specification of what is included, who supplies materials, what happens to the price if something is discovered behind a wall, and a payment schedule that never leaves you paid up ahead of the work.
- Separates the legally gated trades from the ones where logos mean nothing
- Explains Part P and competent person scheme self-certification
- Covers building regulations approval and completion certificates
- Includes insurance checks, staged payments and section 75
- Tick, reword and delete items, then export as a Google Form, PDF, CSV or Markdown
Updated
How to use the Hiring a Tradesperson Checklist
- Check Gas Safe registration on the register yourself, and confirm the categories cover your actual job.
- For electrical work, confirm competent person scheme membership or that building control will be notified.
- Establish whether building regulations approval is needed, and who is responsible for obtaining it.
- Ask for public liability and, where they employ people, employer’s liability insurance in the trading name.
- Get a written specification and a staged payment schedule, and pay the deposit by credit card.
Worked examples
Boiler quote from a van with a logo
Input
Verification section, Essentials only
Output
Checked the Gas Safe register by engineer number
Gas work legally requires registration and the register is public, so verification takes a minute and does not depend on what is painted on the van.
New kitchen circuit
Input
Electrical items
Output
Competent person scheme certificate obtained
Most domestic electrical work falls under Part P, and a scheme member can certify it, whereas uncertified work has to be notified to building control and frequently is not.
Builder suggests skipping building control
Input
Regulations items
Output
Approval obtained and completion certificate kept
The completion certificate is what a conveyancer asks for when you sell, so the saving now becomes a delayed sale or a retrospective application later.
Asked for full payment up front
Input
Payment items
Output
Staged schedule agreed and deposit paid by credit card
Paying in advance removes every lever, while a card deposit can bring section 75 joint liability where the amount qualifies.
Background and insight
Building regulations approval is separate from planning permission and catches people out on exactly the jobs where it matters. Structural changes, new electrical circuits, replacement windows, drainage alterations and some insulation work engage building control, and the completion certificate is what you will need when you sell. A builder who suggests skipping it is creating a problem for your conveyancer years later.
For gas, the Gas Safe register records which categories an engineer is qualified for, so an engineer qualified for boilers is not necessarily qualified for a gas cooker or a commercial appliance. For electrical work, a competent person scheme member can self-certify and issue the certificate, while work by someone outside a scheme has to be notified to building control, which costs more and is often simply not done.
Insurance is where a cheap quote hides a risk. Public liability insurance covers damage the trader causes to your property, and employer’s liability is compulsory where they employ anyone. Asking to see both, with the policy in the trading name you are contracting with, takes one message and is the difference between a claim and a dispute.
Payment structure matters more than the headline price. A deposit for materials is reasonable, staged payments against completed and inspected stages are normal, and paying the whole amount in advance removes every lever you have. Paying a deposit by credit card can bring section 75 protection where the amount qualifies, which means the card provider is jointly liable if the trader fails to perform.
If something goes wrong, the Consumer Rights Act requires services to be performed with reasonable care and skill, within a reasonable time and for a reasonable price where none was agreed, with repeat performance or a price reduction as remedies. For scheme members there is usually a complaints and dispute resolution route, which is one of the practical arguments for using one.
Finally, the signals that genuinely predict trouble: pressure to decide immediately, a cash-only price, an address that is a mailbox, no written quote, and an offer to start tomorrow on a job that any busy competent trader would be booking weeks out.
Common use cases
Gas and electrical work
The two trades with legal gates, and how to check.
Anything structural
Building regulations and the certificate you will need.
Choosing between quotes
Insurance, scheme membership and payment terms.
When it goes wrong
Consumer Rights Act remedies and scheme disputes.
Tips and limitations
- Check Gas Safe yourself using the engineer number. It is public.
- There is no legal register of plumbers or builders, so a logo proves nothing.
- The building control completion certificate is what your conveyancer will want.
- Ask for the insurance in the exact trading name you are contracting with.
- Never be paid up ahead of the work. Stage the payments.
Sources and further reading
- Building regulations approval, UK Government. When approval is needed and completion certificates
- TrustMark, TrustMark. Government-endorsed quality scheme for tradespeople
- Electrical Safety First, Electrical Safety First. Part P, competent person schemes and safe electrical work
- Consumer rights, UK Government. Rights on services and remedies for poor work
Frequently asked questions
Which UK trades are legally required to be registered?
Anyone working on gas appliances or pipework must be Gas Safe registered by law, and the register is public so you can check an engineer by number. Most domestic electrical work falls under Part P and should be certified under a competent person scheme.
Is there an official register of plumbers or builders?
No. Outside gas and electrical work there is no legal register, so claims of being registered or certified mean whatever the trader intends. TrustMark is the government-endorsed quality scheme and is a genuine signal, unlike an invented association.
Do I need building regulations approval?
Often, and it is separate from planning permission. Structural work, new circuits, replacement windows, drainage changes and some insulation engage building control, and the completion certificate is what a buyer’s conveyancer will ask for when you sell.
What insurance should a tradesperson have?
Public liability insurance for damage to your property, and employer’s liability if they employ anyone, which is compulsory. Ask to see both with the policy in the exact trading name you are contracting with.
How should I structure payments?
A reasonable deposit for materials, then staged payments against completed and inspected stages, never paid up ahead of the work. Paying the deposit by credit card can give section 75 joint liability where the amount qualifies.
What are my rights if the work is bad?
The Consumer Rights Act requires services to be performed with reasonable care and skill, within a reasonable time, and for a reasonable price where none was agreed, with repeat performance or a price reduction as remedies. Scheme members usually also offer a dispute route.
Is there an in-depth guide to the Hiring a Tradesperson Checklist?
Yes. “Why Checklists Work, and How to Use One Properly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.