India version. Rupees with Indian digit grouping, Income-tax written down value blocks with the 180-day half-rate rule, and Companies Act Schedule II straight-line with a 5% residual value. US version

Depreciation Calculator India (Income Tax WDV and Companies Act)

Depreciation as per Income Tax Act (WDV on blocks at 15%, 40% or 10%, half rate under 180 days) and Companies Act Schedule II straight-line, in rupees.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Depreciation Calculator?

Indian businesses keep two depreciation schedules. The books follow the Companies Act, 2013, Schedule II (or the accounting policy of a firm or proprietor), usually straight-line over the useful life. The return follows the Income-tax law, where assets are grouped into blocks and depreciated on the written down value (WDV) at fixed rates: 15% for general plant and machinery, 40% for computers including software, 10% for furniture and fittings. These are the Appendix I rates under the Income-tax Act, 1961, which applies up to FY 2025-26. From tax year 2026-27 the Income-tax Act, 2025 applies, so confirm the block rates and the 180-day rule for the year you claim.

The rule people most often get wrong is the 180-day test. An asset put to use for less than 180 days in the year it is acquired gets half the rate that year. A laptop costing ₹1,20,000 bought in December gets 20%, ₹24,000, in that year instead of ₹48,000; the next year the full 40% applies to the ₹96,000 left, giving ₹38,400.

This version opens on the tax-pool method with the WDV rate, so the schedule shows the opening WDV, the deduction and the closing WDV that goes into the next year. Switch to straight-line for the Companies Act figure, set the residual value (Schedule II indicates up to 5% of cost) and pick the months used in the first financial year, counted from April.

  • Straight-line, double-declining, any declining-balance rate, SYD, units of production and MACRS
  • Optional switch from declining balance to straight-line
  • Partial first year by month in service
  • MACRS GDS half-year percentages from IRS Publication 946 Table A-1
  • Schedule table, depreciation and book value chart, method comparison chart
Read the guide: Depreciation Methods Compared: Straight-Line, DDB, SYD and MACRS

Updated

How to use the Depreciation Calculator

  1. Keep the method on "Tax pool" for the Income-tax figure and enter the actual cost (price plus freight, installation and non-refundable taxes; GST you claim as input tax credit is not part of cost).
  2. Enter the block rate: 15% for plant and machinery, 40% for computers and software, 10% for furniture, 10% for most buildings and 5% for residential buildings.
  3. If the asset was put to use for less than 180 days in the year of purchase, choose "Half rate in year 1". Otherwise keep "Full rate in year 1".
  4. For the books, choose straight-line, enter the residual value and useful life from your Schedule II policy, and the months the asset was in use in the first year (the financial year start is set to April).

Worked examples

Machinery used for more than 180 days

Input

Tax pool, cost ₹10,00,000, rate 15%, full rate in year 1, 3 years

Output

Depreciation ₹1,50,000, ₹1,27,500, ₹1,08,375; closing WDV ₹6,14,125

Bought in May and used from June, the machine passes the 180-day test, so the full 15% applies in year one. In practice the deduction is worked on the whole block, so other additions and sales of plant at 15% change the opening WDV.

Laptop bought in December (under 180 days)

Input

Tax pool, cost ₹1,20,000, rate 40%, half rate in year 1, 3 years

Output

₹24,000 in year 1, ₹38,400 in year 2, ₹23,040 in year 3; closing WDV ₹34,560

Used from December to March, the laptop is in use for fewer than 180 days, so only 20% is allowed in the first year. The half rate is a one-year rule: from the next year the full 40% applies.

Same laptop in the company books (Schedule II)

Input

Straight-line, cost ₹1,20,000, residual ₹6,000, life 3 years, 6 months in year 1, year starting April

Output

₹19,000 in year 1, ₹38,000 in years 2 and 3, ₹19,000 in year 4; book value ₹6,000

Schedule II gives end-user computers a useful life of 3 years. Bought in October, the laptop is charged for 6 months in the first year, and the last half-year falls in a fourth year. The difference from the tax WDV feeds deferred tax.

Background and insight

Straight-line charges (cost - salvage) / life every year. Declining balance charges a fixed percentage of the opening book value: the rate is factor / life, so double-declining on a 5-year asset is 40% a year. Salvage is not subtracted before applying that rate, but the book value is never allowed to fall below it. Sum-of-the-years' digits weights the early years using fractions of n(n + 1) / 2: for 5 years the fractions are 5/15, 4/15, 3/15, 2/15 and 1/15 of the depreciable base.

Without a switch, declining balance would leave a residue at the end of the life, so the final year takes whatever is left down to salvage. With the switch on, the calculator compares the declining-balance charge with straight-line over the remaining life each year and uses the larger one. That is the same rule the IRS builds into MACRS: running double-declining with the switch and a half-year first year reproduces the published MACRS percentages to within their rounding.

MACRS is US tax depreciation and differs from book depreciation: salvage is ignored, recovery periods are fixed classes, and a convention decides the first-year fraction. The MACRS option applies the General Depreciation System percentages for 3, 5, 7, 10, 15 and 20-year property under the half-year convention, taken from IRS Publication 946 (2025), Appendix A, Table A-1. It does not apply the mid-quarter convention, Section 179 expensing, bonus depreciation or real-property tables, so use it as a check and confirm a tax return with a professional.

Common use cases

  • Preparing a fixed asset register

    Produce the schedule for a new asset so the monthly or annual journal entries are ready for the books.

  • Comparing methods before choosing a policy

    See how much earlier expense lands under accelerated methods and how that changes reported profit in the first years.

  • Estimating US tax deductions

    Check the MACRS deduction for equipment or a vehicle before talking to your accountant.

  • Valuing used equipment

    Read the book value at any year to compare against a trade-in or resale offer.

Tips and limitations

  • Income-tax depreciation is calculated on the block, not asset by asset. Use the calculator per asset to check figures, then add the results within each block.
  • If you opt for presumptive taxation under section 44AD or 44ADA of the 1961 Act (from tax year 2026-27, check the matching provision of the Income-tax Act, 2025), depreciation is treated as already allowed; the WDV is still reduced as if it had been claimed.
  • Keep the date each asset was put to use, not just the invoice date. The 180-day test runs from first use.
  • Additional depreciation for new plant and machinery in manufacturing is a separate first-year deduction and is not included here. Companies on the concessional regime under section 115BAA of the 1961 Act cannot claim it.

Sources and further reading

  1. Depreciation rates (Appendix I to the Income-tax Rules), Income Tax Department, Government of India. Block rates: machinery and plant 15%, computers including software 40%, furniture and fittings 10%.
  2. Appendix I: Table of rates at which depreciation is admissible, Income Tax Department, Government of India
  3. e-Filing portal: payments under the Income-tax Act, 1961 and the Income-tax Act, 2025, Income Tax Department, Government of India. The 1961 Act applies to dues up to FY 2025-26 and the Income-tax Act, 2025 from tax year 2026-27.
  4. Companies Act, 2013, Schedule II: useful lives to compute depreciation, Income Tax Department, Government of India (reproducing the Ministry of Corporate Affairs schedule). Indicative useful lives and the 5% residual value.

Frequently asked questions

What is the depreciation rate for computers under the Income-tax Rules (Appendix I)?

40% on the written down value for computers including computer software, in the block for computers. A computer put to use for less than 180 days in its first year gets 20% that year.

What is the 180-day rule for depreciation?

If an asset is acquired during the year and put to use for less than 180 days in that year, the deduction for that year is limited to 50% of the normal rate. The rule only affects the year of acquisition; later years use the full rate on the closing WDV.

What is the difference between WDV and SLM depreciation?

WDV (written down value) applies a fixed rate to the reducing balance, so the charge falls each year and the asset is never fully written off. SLM (straight-line method) charges the same amount each year, cost less residual value divided by useful life. Income-tax uses WDV for most assets; company books commonly use SLM under Schedule II.

How is depreciation calculated under Companies Act Schedule II?

Schedule II sets indicative useful lives (3 years for end-user computers, for example) and a residual value of up to 5% of the original cost. A company can use a different life or residual value if it is technically justified and disclosed. The charge is pro-rated from the date the asset is available for use.

Is GST included in the cost for depreciation?

Not if you claim the GST as input tax credit. The cost is the price paid net of credit you take, plus freight, installation and other costs to bring the asset into use. If no credit is taken, the GST becomes part of the cost.

What is the depreciation rate on a car for business use?

Motor cars other than those used in a business of running them on hire are in the 15% plant and machinery block. The 180-day half rate applies in the year of purchase in the same way as for other assets.

Is there an in-depth guide to the Depreciation Calculator?

Yes. “Depreciation Methods Compared: Straight-Line, DDB, SYD and MACRS” covers the background, how it works, common pitfalls and worked examples. Read the full guide.