India version. Uses the UGC Choice Based Credit System 10-point scale (O = 10, A+ = 9 ... P = 4) with credits, SGPA and CGPA, instead of the US 4.0 GPA. US version
SGPA and CGPA Calculator (10-Point Scale)
Calculate SGPA and CGPA on the 10-point scale from letter grades (O, A+, A, B+) or grade points and credits, with CBSE's CGPA x 9.5 percentage and a target planner.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the GPA Calculator?
Indian universities following the UGC Choice Based Credit System grade each course on a 10-point scale: O (Outstanding) 10, A+ 9, A 8, B+ 7, B 6, C 5, P (Pass) 4, and F or Ab (absent) 0. Your SGPA for a semester is the credit-weighted average of those grade points; your CGPA is the credit-weighted average of all semesters so far.
Type each course's letter grade or the grade point printed on the marksheet, and its credits. A 4-credit theory paper counts twice as much as a 2-credit one, and a 1.5-credit lab counts less still, which is why two students with the same letters can have different SGPAs.
To get a CGPA, enter your CGPA so far and the credits behind it. The planner then shows the SGPA you need over the remaining credits to reach a target, for example 8.5 for a placement cut-off.
- Letter grades or percentages with credits per course
- Unweighted and weighted GPA with editable honors and AP/IB bonuses
- Three US grading scales (4.0 with plus/minus, 4.3, whole letters), plus the Philippine 1.00 to 5.00 GWA, the Nigerian NUC 5-point CGPA and the Pakistani HEC 4.0 scale with standing
- Cumulative GPA from prior GPA and credits
- Target GPA planner
- Pass/fail and withdrawn courses listed but not averaged
Updated
How to use the GPA Calculator
- For each course, type the grade (letter or percentage), the credits or units, and choose Regular, Honors or AP/IB. Course names are optional.
- Choose the grading scale your school uses and adjust the honors and AP bonuses if they differ from +0.5 and +1.0.
- To get a cumulative GPA, enter your GPA so far and the number of credits it covers.
- Read the term, weighted and cumulative GPAs and the grade points table.
- In the planner, enter your target GPA and the credits you have left to see the average you need.
Worked examples
First-semester B.Tech SGPA
Input
Maths A+ (4 credits), Physics A (4), Basic Electrical B+ (3), Programming O (3), Physics Lab A+ (1.5), Workshop O (1.5), English B (2)
Output
SGPA 8.39 (159.5 credit points over 19 credits)
Credit points are grade point × credits: 36 + 32 + 21 + 30 + 13.5 + 15 + 12 = 159.5. Divide by 19 credits.
CGPA after the second year and a target
Input
CGPA 7.9 over 60 credits, plus this semester's 19 credits; later, CGPA 8.12 over 80 credits with 80 to go and a target of 8.5
Output
CGPA 8.02 over 79 credits; you need 8.88 over the remaining 80 credits
CGPA = (7.9 × 60 + 159.5) ÷ 79. Raising a CGPA gets harder the more credits are behind it.
The UGC's own B.Sc. Honours illustration
Input
Semester I: C-1 A (6 credits), C-2 B+ (6), AECC-1 B (2), GE-1 B (6)
Output
SGPA 6.9 (138 ÷ 20)
This is the worked example in the UGC's CBCS curriculum document, so you can check the tool against it before entering your own marksheet.
A failed course
Input
A (4 credits), F (4), B+ (3)
Output
SGPA 4.82
F counts as 0 grade points over its credits, which pulls the SGPA down hard, and the UGC rules require you to reappear in that exam. Check how your university recalculates the SGPA once you clear it.
Background and insight
A GPA is a credit-weighted average. Each grade is turned into grade points (A = 4.0, A- = 3.7, B+ = 3.3, B = 3.0, B- = 2.7, C+ = 2.3, C = 2.0, C- = 1.7, D+ = 1.3, D = 1.0, D- = 0.7, F = 0 on the most common US scale), multiplied by the course credits to give quality points, and the total quality points are divided by the total credits. A 4-credit B+ therefore counts a third more than a 3-credit B+.
Schools do not all use the same table. Some give A+ 4.3, some drop plus and minus grades altogether, and percentage cut-offs vary; the College Board's own conversion chart, for example, uses whole letters only. The scale menu covers the three variants you are most likely to meet, and you should check your handbook for anything unusual.
Weighted GPAs reward harder courses by adding a bonus to their points, typically +0.5 for honors and +1.0 for AP or IB, which is why weighted GPAs can exceed 4.0. Both bonuses are editable because high schools set their own. Many colleges recalculate applicants' GPAs on their own basis, often stripping the weighting, so the unweighted figure is usually the one to compare across schools.
Common use cases
End-of-term check
Work out the term GPA as soon as grades are posted, before the transcript updates.
College applications
See both the weighted and unweighted GPA so you can report the one an application asks for.
Scholarship and honors thresholds
Find out what grades keep you above a 3.0 or 3.5 requirement next term.
Academic probation recovery
Use the planner to see how many credits at what average it takes to climb back over 2.0.
Tips and limitations
- Use the exact credits from your syllabus; half credits for labs are common.
- Some universities exclude audit or non-credit courses (such as environmental studies) from SGPA; leave them out.
- Mark bands for each letter are set by each university (the UGC only recommends that B should need at least 50% and B+ at least 55%), so enter the letter or grade point from the marksheet rather than converting marks yourself.
Sources and further reading
- Minimum course curriculum for undergraduate courses under Choice Based Credit System, University Grants Commission. Grades and grade points (O 10 to P 4, F and Ab 0) and the SGPA and CGPA illustration.
- Circular 24/2010: indicative percentage of marks, Central Board of Secondary Education. Indicative percentage = 9.5 × grade point.
Frequently asked questions
How is SGPA calculated?
Multiply each course's grade point by its credits, add them up, and divide by the total credits for the semester. In the example, 159.5 ÷ 19 = 8.39.
How do I calculate CGPA from SGPA?
Weight each semester's SGPA by its credits: CGPA = Σ(SGPA × semester credits) ÷ Σ semester credits. Enter your CGPA so far and its credits as the prior figure, and this semester's courses below.
How do I convert CGPA to percentage?
It depends on who issued the CGPA. CBSE's former Class IX-X grading scheme gave an indicative percentage of CGPA × 9.5, which the tool shows. Universities publish their own conversion, often on the back of the marksheet, so use that rule for degree CGPAs.
What grade point does O, A+ or B+ carry?
On the UGC 10-point scale, O (Outstanding) is 10, A+ (Excellent) 9, A (Very Good) 8, B+ (Good) 7, B (Above Average) 6, C (Average) 5 and P (Pass) 4. F and Ab carry 0; non-credit courses graded Satisfactory or Unsatisfactory are not counted.
What CGPA do I need for placements?
Companies set their own cut-offs, often stated as a CGPA or percentage with no active backlogs. Put the cut-off in the target box to see the SGPA you need for the rest of the course.
Can I use this for a 4-point or US GPA?
Yes. Switch the grading scale to one of the 4.0 options, which use US letter grades and percentages.
Is there an in-depth guide to the GPA Calculator?
Yes. “GPA and Final Grades: The Weighted Averages Behind Your Transcript” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.