Ring Size Converter

Convert US ring sizes 3 to 13 into UK letters, EU circumference and Japanese sizes, or find the size from a measured inside diameter in millimeters.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Ring Size Converter?

Choose a US ring size from 3 to 13, in half sizes, and read the matching UK letter, EU size, Japanese size, and the inside diameter and circumference in millimeters. US 7, the default, shows a 17.32 mm diameter, a 54.4 mm circumference, EU 54 and Japan 14.

If what you have is a ring rather than a size, type its inside diameter in millimeters instead and the converter snaps to the nearest size on the chart; 17.3 mm lands on US 7. The full table of every half size from US 3 to 13 sits below with your row highlighted, so the neighbouring sizes are visible when you are deciding between two.

Everything runs in your browser and no measurement is sent anywhere. The toolbar copies a link that reopens the page with your size or diameter already set, handy when the measurement has to travel to whoever is doing the buying.

  • US sizes 3 to 13 in half steps with UK, EU and Japanese equivalents
  • Direct input of a measured inside diameter in millimeters
  • Diameter and circumference shown for every size
  • Full chart with the selected row highlighted
  • Share link that keeps the entered size or measurement
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Ring Size Converter

  1. Pick a US size from the dropdown, half sizes included, to see all the equivalents at once.
  2. Or measure a well-fitting ring across its inside edges in millimeters and type that diameter instead.
  3. Read the UK, EU and Japanese sizes plus the diameter and circumference in the result cards.
  4. Check the full chart below to see the neighbouring half sizes before settling.
  5. Copy the toolbar link to send the measurement to whoever is buying.

Worked examples

The most common lookup

Input

US 7

Output

EU 54, Japan 14, 17.32 mm diameter

The EU number is the circumference, pi times 17.32, which is 54.4 mm, rounded to the ISO size 54. Japan reaches 14 by its own ladder of a third of a millimeter per size.

From a borrowed ring

Input

17.3 mm inside diameter

Output

US 7

The converter snaps the measurement to the nearest chart row, 17.32 mm. Measure across the widest point of the inside circle; measuring the outside adds the metal thickness twice.

A European listing

Input

EU 52 (from the chart)

Output

US 6, 16.51 mm diameter

EU sizes are circumferences, so 52 means 52 mm around, a 16.5 mm diameter, which the table shows against US 6. Reading the chart by its EU column works in either direction.

A larger size

Input

US 10

Output

EU 62, Japan 21, 19.76 mm diameter

Each full US size adds 0.8128 mm of diameter, so three sizes above US 7 adds about 2.4 mm. The circumference grows by pi times that, roughly 2.6 mm per full size.

Background and insight

Ring sizing systems disagree because they measure different things. The EU size defined by ISO 8653 is the most transparent: it is simply the inside circumference in millimeters, so EU 54 means 54 mm around and converts to diameter by dividing by pi. The US and Canadian scale is a numeric ladder over diameter, adding 0.8128 mm per full size; working back from the chart anchor of US 7 at 17.32 mm gives every other size. Japanese sizes under JIS follow their own ladder, starting at a 13 mm diameter for size 1 and climbing a third of a millimeter per size, which is why US 7 lands on Japan 14.

The UK and the countries that follow its system use letters, A through Z with half steps, a convention rather than a formula. Published charts from different jewelers disagree by as much as half a size for the same letter, and this page says so rather than presenting one chart as gospel. When a letter is all you have, treat it as a starting point; when the purchase matters, convert through the millimeter diameter or circumference, the two columns every chart agrees on because they are physical measurements.

The measurement itself has more slack than the tables suggest. Fingers swell in heat, after exercise and late in the day, and shrink in the cold, easily by half a size. Wide bands fit more snugly than thin ones at the same nominal size, and the knuckle on some fingers is larger than the base, so the right size is a compromise between sliding over the knuckle and not spinning at rest. This is why jewelers size the same customer slightly differently on different days, and why a measured diameter from a well-fitting ring is the most reliable number you can bring to this chart.

Common use cases

  • Buying a ring as a surprise

    Borrow a ring they wear on the target finger, measure its inside diameter, and convert without ever asking a size.

  • Ordering from international shops

    Translate a Japanese or European listing into your US size, or the reverse, before paying for a ring that cannot be exchanged cheaply.

  • Checking an inherited or vintage ring

    Measure what you have and learn what size it would be called before taking it for resizing.

  • Selling jewelry across borders

    List one piece with correct US, UK, EU and Japanese sizes instead of forcing every buyer to guess.

Tips and limitations

  • Measure the finger, or borrow the ring, at the end of a warm day; fingers run smaller in the morning and in the cold, and the ring must fit at their largest.
  • Wide bands wear tighter: for bands much over 6 mm, consider going up half a size from the measured fit.
  • If the knuckle is clearly bigger than the base of the finger, size between the two measurements so the ring passes the knuckle without spinning freely afterward.
  • Between two sizes, take the larger; a slightly loose ring can be sized down or kept with a small insert, while a tight one is simply unwearable.
  • Trust millimeters over letters: UK letter charts differ between jewelers by up to half a size, but a diameter or circumference means the same thing everywhere.

Sources and further reading

  1. Ring size, Wikipedia. ISO 8653 circumference sizing, the US scale and JIS sizes
  2. NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Millimeter and inch definitions behind the measurements

Frequently asked questions

What EU ring size is a US 7?

EU 54. The US 7 diameter is 17.32 mm, its circumference is pi times that, 54.4 mm, and ISO 8653 names the size by that circumference rounded to 54. The same ring is size 14 in Japan.

How do I measure ring size from an existing ring?

Lay the ring on a ruler or, better, use calipers, and measure the inside of the circle at its widest point in millimeters. Type that diameter into the converter and it snaps to the nearest size; 17.3 mm reads as US 7. Measure inside edge to inside edge, never across the metal.

Why do UK ring size letters vary between charts?

The letter scale is a trade convention rather than a published formula, and jewelers' charts disagree by up to half a size for the same letter. Use the letter to get close, then confirm with the millimeter diameter or circumference, which are unambiguous.

How much bigger is each ring size?

On the US scale, each full size adds 0.8128 mm of inside diameter, so a half size is about 0.4 mm. That sounds tiny, but it is roughly 1.3 mm of circumference, which a finger feels clearly; most people have a definite preference between neighbouring half sizes.

Can I measure my ring size with a string?

It gives a rough answer at best: string stretches, flattens and is hard to read to the millimeter, and an error of 1.3 mm of circumference is already half a size. A well-fitting ring measured across its inside diameter is far more reliable, and a jeweler's sizer is better still.

Do wide rings need a bigger size?

Usually, yes. A wide band contacts more of the finger and has no room to ride over the flesh, so it wears about half a size tighter than a thin band of the same nominal size. For bands over about 6 mm, order half a size up from the measured fit.

What ring size is a 17.3 mm diameter?

US 7, whose chart diameter is 17.32 mm. The same measurement is EU 54, since the circumference is 54.4 mm, and Japan 14. Type any diameter between 10 and 25 mm into the converter to place it on the chart.

Is there an in-depth guide to the Ring Size Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.