India version. Rupees and units: the PM Surya Ghar central financial assistance as a rebate, net metering valued at your slab rate, and output per kW you can set for your city. US version

Rooftop Solar Payback Calculator (India)

Rooftop solar payback in India after the PM Surya Ghar subsidy of up to ₹78,000: units generated, bill savings at your slab rate, and years to recover the cost.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Solar Payback Calculator?

Under PM Surya Ghar: Muft Bijli Yojana, households get central financial assistance of ₹30,000 per kW for the first 2 kW and ₹18,000 for the third kW, so ₹78,000 for a 3 kW system; nothing extra is paid above 3 kW. In special category states and union territories the rates are ₹33,000 and ₹19,800. The subsidy is paid after commissioning, so the tool treats it as a rebate on the cost.

With net metering, units you export are set off against units you import, so every unit the panels make is worth your tariff. That is why the default self-use here is 100%. If your DISCOM pays less for net exports at the end of the year, lower the self-use share and enter the export rate.

Output depends on your city and roof. This version starts at 1,400 units per kW a year as an assumption; replace it with your vendor's estimate or the calculator on the national portal.

  • Payback year, lifetime savings, net gain and ROI
  • NPV, IRR and cost per kWh produced
  • Self-use and export valued separately for net billing
  • Degradation, price escalation, upkeep and inverter replacement
  • Year-by-year table, any currency (rand and peso amounts formatted the local way), shareable link
Read the guide: Solar Panel Payback Period: How to Work It Out Honestly

Updated

How to use the Solar Payback Calculator

  1. Enter the system size in kW DC and the yearly production per kW for your site (from PVWatts or your quote).
  2. Enter the installed price per watt, or switch to the total quote, plus any tax credit percentage and fixed rebates.
  3. Enter the price you pay per kWh, the share of solar you expect to use at home, and the credit for exported power.
  4. Adjust the price rise, degradation, upkeep, inverter replacement, analysis period and discount rate if needed.
  5. Read the payback, net gain, ROI, NPV, IRR and cost per kWh, and check the year-by-year table.

Worked examples

3 kW system with the full subsidy

Input

₹1,80,000 installed, ₹78,000 CFA, 1,400 units per kW, ₹8 a unit, 100% offset by net metering, ₹1,000 a year upkeep, inverter ₹20,000 in year 12

Output

4,200 units in year one, saving ₹33,600; payback 3.1 years on ₹1,02,000

The subsidy is 30,000 × 2 + 18,000 × 1 = ₹78,000. Without it the same system pays back in 5.3 years.

2 kW system in a lower slab

Input

₹1,30,000, ₹60,000 CFA, ₹6 a unit, inverter ₹15,000 in year 12

Output

Payback 4.3 years

A lower tariff slab means each solar unit saves less, so smaller homes on cheap slabs wait longer. Size the system to your daytime and monthly use, not the roof.

Background and insight

Production is system size times specific yield, the kWh one kW of panels makes in a year at your site. It depends on latitude, roof direction, tilt and shading, so use the free PVWatts calculator from the National Laboratory of the Rockies (formerly NREL) for your address. Output then declines each year; a 2013 NREL review of field data (Jordan and Kurtz) put the median degradation of crystalline silicon panels at about 0.5% a year, the default here.

Savings depend on what each kWh is worth. Solar used in the home avoids buying a kWh at the retail price. Exported solar earns whatever the utility credits: the retail price under classic net metering, or a lower avoided-cost or export rate under net billing schemes such as California's. The calculator splits production by your self-use percentage and values each part separately, then grows both values by the price escalation rate. The default retail price is the EIA's October 2026 forecast of about 18 cents per kWh for US residential customers in 2026.

Payback is the year the cumulative cash flow, starting from the net cost, turns positive, interpolated within the year. ROI is the net gain divided by the net cost. NPV discounts each year's cash flow at your discount rate, and IRR is the rate at which NPV is zero, comparable with other investments. The cost per kWh is the net cost plus upkeep divided by lifetime production, undiscounted. In the US, the section 25D residential clean energy credit ended for expenditures after 31 December 2025 under the One Big Beautiful Bill Act, so the credit field defaults to 0%.

Common use cases

  • Checking an installer quote

    Put the quoted price and production in and see if the promised payback holds with realistic export rates.

  • Comparing quotes

    Compare systems of different sizes and prices on payback, IRR and cost per kWh.

  • Deciding after incentives changed

    See how solar looks without the federal credit and with local rebates only.

  • Sizing for self-use

    Test whether a smaller system with higher self-use pays back faster under net billing.

Tips and limitations

  • Apply through the national portal before installation and use an empanelled vendor; the subsidy depends on it.
  • Ask the vendor for a generation estimate for your location and roof direction; shading from water tanks and nearby buildings matters.
  • Check your DISCOM's net metering rules for how surplus units are settled at the end of the year.

Sources and further reading

  1. Criteria and details of incentives available to individuals under PM Surya Ghar: Muft Bijli Yojana, Press Information Bureau / Ministry of New and Renewable Energy. CFA of ₹30,000 per kW up to 2 kW and ₹18,000 per kW to 3 kW (₹33,000 and ₹19,800 in special category states).
  2. Solar rooftop and PM Surya Ghar, Ministry of New and Renewable Energy. Central financial assistance for residential rooftop solar and scheme guidelines.
  3. PM Surya Ghar national portal, Ministry of New and Renewable Energy

Frequently asked questions

How much subsidy is there on a 3 kW rooftop solar system?

₹78,000 under PM Surya Ghar: ₹30,000 per kW for the first 2 kW and ₹18,000 for the third. Special category states and union territories get ₹33,000 and ₹19,800 per kW. There is no further central subsidy above 3 kW.

How many units does a 1 kW solar system produce in India?

It depends on location, tilt and shading. The tool's 1,400 units per kW a year is a starting assumption; use your vendor's estimate for your roof.

What is the payback period of rooftop solar in India?

In the 3 kW example it is 3.1 years with the subsidy and 5.3 years without, at ₹8 a unit. Lower slab rates or poor output make it longer.

Does net metering mean I save my full tariff on every unit?

Under net metering, exported units are set off against imported units, so mostly yes. Fixed charges stay, and surplus units left at the end of the settlement period may be paid at a lower rate set by your state commission.

Do I need a battery?

Not for savings under net metering, since the grid acts as storage. A battery helps where outages are frequent, but it adds cost that this payback does not include.

Is there an in-depth guide to the Solar Payback Calculator?

Yes. “Solar Panel Payback Period: How to Work It Out Honestly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.