New Zealand version. Metres and litres, with NZ spreading rates in m² per litre from manufacturers' data sheets, separate ceiling paint, and sealer on new GIB plasterboard. US version

Paint Calculator (New Zealand)

How many litres of paint a room needs from its size in metres, coats and the m² per litre on Resene and other NZ data sheets, with GIB sealer and tin sizes.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Paint Calculator?

New Zealand paint maker Resene sets out the sum this calculator uses: surface area divided by the spreading rate, times the number of coats, equals the litres needed. The spreading rate is printed on the tin as "coverage" and on the data sheet as "theoretical coverage", in square metres per litre, and both tell you how many coats to plan for. Resene's own worked example is 42 m² of wall at 11 m² per litre over two coats, which comes to 7.6 litres, so you would buy 8.

Walls and ceilings usually take different paints with different rates, so work them out separately. Resene's data sheet for Zylone Sheen, a common interior wall paint, gives 14 to 16 m² per litre and two coats as usual; its Ceiling Paint Flat gives 10 m² per litre and one to two coats. A 3.6 by 3 metre bedroom with a 2.4 metre stud has 27.9 m² of wall after the door and window come off. Two coats at 14 m² per litre need just under 4 litres, while two coats on the 10.8 m² ceiling take 2.16 litres.

New plasterboard needs preparation first. Resene's data sheets call for its Broadwall Waterborne Wallboard Sealer on new paperfaced plasterboard before the topcoats, and a level of finish to suit the paint, so add a sealer coat in the calculator for a new GIB-lined room. In older houses, the data sheets warn that sanding dust from old lead-based paints can harm your health; get advice before sanding paint of unknown age.

  • Walls, ceiling or both, with doors, windows and other areas subtracted
  • Separate coat counts for walls and ceiling, plus optional primer
  • Shopping list in 5 gallon, 1 gallon and quart sizes, or 10, 5, 2.5 and 1 litre tins
  • Imperial and metric inputs that convert when you switch
  • Cost from your own can prices, copy and share link, all in the browser
Read the guide: How Much Paint Do I Need? Coverage, Coats and Cans

Updated

How to use the Paint Calculator

  1. Measure the room in metres, including the stud height (floor to ceiling).
  2. Run walls and ceiling as two calculations if they use different paints: pick "Walls" with the wall paint's rate, then "Ceiling" with the ceiling paint's rate.
  3. Enter the spreading rate from the tin or data sheet in m² per litre. Use the low end of the range for a strong colour change or porous surface.
  4. For new GIB, add one sealer coat with the sealer's own rate from its data sheet.
  5. Round up to the tin sizes your store sells. The buy list works in 15, 10, 4 and 1 litre tins, so check its mix against the sizes on the shelf.
  6. The tin prices are example figures, not quotes; enter your store's prices to get a real paint cost.

Worked examples

Bedroom walls, two coats

Input

3.6 x 3.0 m room, 2.4 m stud, one door (1.6 m²) and one window (2.16 m²), 2 coats at 14 m² per litre

Output

27.92 m² of wall; 3.99 litres; buy one 4 litre tin

At 16 m² per litre, the top of the Zylone Sheen range, the same walls need 3.49 litres, so a 4 litre tin covers it either way. A deep colour that needs a third coat would not.

The same bedroom's ceiling

Input

10.8 m² ceiling, 2 coats at 10 m² per litre (ceiling paint)

Output

2.16 litres

Ceiling paint spreads less far than wall paint, so working both at the wall rate would undercount the ceiling. Resene gives one to two coats for its ceiling paint, so one coat may be enough on a sound ceiling.

Resene's 42 m² example

Input

42 m² of wall, 2 coats at 11 m² per litre

Output

7.64 litres; buy two 4 litre tins (8 litres)

This matches Resene's worked example of 7.6 litres and its advice to buy 8, which leaves a little for later touch-ups.

Background and insight

Coverage is the number that matters most and the one people skip. Manufacturers state a spreading rate for one coat at the film thickness the paint is designed for, usually on a smooth, sealed surface. Rough or porous surfaces, bare drywall, fresh plaster and textured ceilings soak up more, so the real figure can fall to 250 square feet per gallon or lower. Big colour changes, especially light over dark, often need a third coat or a tinted primer. That is why the calculator lets you choose a surface preset or type the figure from your can.

Openings are subtracted by area. A standard interior door of 3 by 7 feet is 21 square feet and a 3 by 5 foot window is 15 square feet, which are the defaults. Painters often ignore small windows because cutting in around them uses nearly as much paint as the glass would have taken; subtracting them gives the leanest honest estimate, and the extra percentage puts some back.

Two coats are the norm for new colour on walls. The first coat hides most of the old colour and evens out porosity; the second gives the uniform sheen and colour the manufacturer tested. Ceilings in flat white over the same white are often fine with one coat.

Common use cases

  • Repainting a room

    Check whether one gallon is enough or you need two before driving to the store, and avoid opening a second batch mid-wall.

  • New drywall

    Add a primer coat with its own coverage figure so the primer and finish paint are bought together.

  • Whole-house quotes

    Price several identical bedrooms at once and compare 5 gallon buckets against single gallons.

  • Ceilings only

    Estimate ceiling white for a whole floor, where one coat over the same colour is often enough.

Tips and limitations

  • Check the data sheet for the exact product and sheen; rates differ between products and even between colours that need an extra coat.
  • Allow the recoat time on the data sheet between coats; Resene gives at least two hours for Zylone Sheen and its Ceiling Paint.
  • Rough or porous surfaces take more paint than the theoretical coverage. Resene names corrugated iron as an example of a surface that needs more.
  • Keep a little left over, labelled with the colour and room, for touch-ups.

Sources and further reading

  1. Paint calculator: how much paint do I need?, Resene. Formula (area / spreading rate) x coats; 42 m² at 11 m²/L over two coats = 7.6 L, buy 8 L.
  2. Resene Zylone Sheen data sheet D302, Resene. 14 to 16 m² per litre, usually 2 coats, Broadwall sealer on new paperfaced plasterboard, lead dust warning.
  3. Resene Ceiling Paint Flat data sheet D305, Resene. 10 m² per litre, 1 to 2 coats.

Frequently asked questions

How many square metres does a litre of paint cover in NZ?

It depends on the product. Resene's data sheets give 14 to 16 m² per litre for Zylone Sheen and 10 m² per litre for its Ceiling Paint Flat. The figure is on the tin and data sheet as coverage, and real coverage is lower on rough or porous surfaces.

How much paint do I need for a bedroom?

For a 3.6 by 3 metre bedroom with a 2.4 metre stud, the walls are about 28 m² after one door and window. Two coats at 14 m² per litre need about 4 litres, plus about 2.2 litres of ceiling paint for two ceiling coats at 10 m² per litre.

Do I need a sealer on new GIB board?

Yes. Resene's wall and ceiling paint data sheets specify its Broadwall Waterborne Wallboard Sealer for new paperfaced plasterboard, after the board is prepared to a suitable level of finish. Add one sealer coat in the calculator with the sealer's own coverage.

How do I work out litres of paint?

Resene's formula is (surface area divided by spreading rate) times the number of coats. Leave out windows and doors from the area first.

Is it safe to sand old paint?

Not without checking. Resene's data sheets warn that sanding dust from old lead-based paints, or old materials containing asbestos, can harm health if breathed in or swallowed, and say to get expert advice if you suspect them.

What tin sizes does the calculator buy?

It rounds up to 15, 10, 4 and 1 litre tins. Round up to the tin sizes your store sells: use the litres figure and pick the cheapest mix of the tins on the shelf that covers it.

Is there an in-depth guide to the Paint Calculator?

Yes. “How Much Paint Do I Need? Coverage, Coats and Cans” covers the background, how it works, common pitfalls and worked examples. Read the full guide.