New Zealand version. Metres and litres, spa pools as well as in-ground pools, NZ pool barrier inspections, and the cost of filling from a metered Watercare supply in NZD. US version

Pool Volume Calculator (NZ)

Work out how many litres your pool or spa pool holds, the chlorine and salt doses, and what a town-supply fill costs on a metered Auckland water bill, in NZD.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Pool Volume Calculator?

In New Zealand a pool is measured in litres and dosed per litre, and the volume also tells you what a fill from the town supply will cost. This version works in metres. A 9 x 4.5 m in-ground pool running from 1.1 m deep at the shallow end to 1.9 m at the deep end holds 60,750 litres; a round 4.5 m above-ground pool filled to 1.2 m holds about 19,085 litres; a 2.2 x 2.2 m spa pool with 0.9 m of water holds 4,356 litres.

On a metered Auckland supply Watercare charges for the water and also bills wastewater on 78.5% of the water the meter records. From 1 July 2026 those prices are $2.46 and $4.28 per 1,000 litres including GST, so filling the 60,750-litre pool adds about $149.44 for water and $204.11 for wastewater to the bill: $353.55 in all. Other councils and water suppliers set their own charges, so use the prices on your own bill.

Pool barriers are a separate legal duty. The rules that replaced the Fencing of Swimming Pools Act 1987 in 2017 apply to pools at homes: every residential pool must have a compliant barrier and be inspected by the council every three years, and councils such as Hamilton keep a register of pools for it. A small spa pool can use a lockable cover instead of a fence and is not inspected, which the examples below test.

  • Rectangle, round, ellipse, straight-sided oval, kidney and free-form shapes
  • Sloping floors from shallow and deep depths
  • US gallons, litres, cubic metres and imperial gallons at once
  • Chlorine dose for liquid, bleach, cal-hypo, dichlor and trichlor, with CYA and calcium side effects
  • Salt dose and fill time; everything runs in the browser
Read the guide: Pool Volume and Chlorine Dosing: Gallons, ppm and Salt

Updated

How to use the Pool Volume Calculator

  1. Pick the shape and enter the length and width in metres (the diameter for a round pool). For a free-form pool, enter the water surface area from the builder's plans.
  2. Enter the water depth at each end; for a spa or above-ground pool with a flat floor, enter the same depth twice.
  3. Choose the chlorine product and how far you want to raise free chlorine, and check the strength on the label.
  4. For a salt pool, enter the current salt reading and the level your chlorinator asks for.
  5. Enter your hose flow in litres a minute to see how long a fill takes.

Worked examples

In-ground pool, 9 x 4.5 m

Input

Rectangle 9 x 4.5 m, 1.1 to 1.9 m deep, raise free chlorine by 2 ppm with 12.5% liquid chlorine

Output

60,750 litres; 972 mL of liquid chlorine

Calcium hypochlorite at 65% would be about 187 g for the same rise. At 15 litres a minute a hose takes about 67.5 hours to fill this pool.

What a town-supply fill costs in Auckland

Input

60,750 litres at Watercare's 2026/27 prices: water $2.46 per 1,000 L, wastewater $4.28 per 1,000 L on 78.5% of the water

Output

About $149.44 water + $204.11 wastewater = $353.55

The wastewater part follows Watercare's rule of charging on 78.5% of metered water. Topping up after evaporation and backwashing is charged the same way.

Spa pool and the 5 m² rule

Input

Spa 2.2 x 2.2 m, 0.9 m of water, raise by 2 ppm with 12.5% liquid chlorine

Output

4.84 m² of water surface; 4,356 litres; 69.7 mL of liquid chlorine

Hamilton City Council says a spa with a water surface under 5 m² and sides higher than 760 mm can have a lockable cover instead of a fence. The tool's surface area tells you which side of 5 m² your spa is on.

Salt for a new salt pool

Input

60,750 litres, salt from 0 to 4,000 ppm

Output

243 kg of salt

Use the level printed on your own chlorinator, not 4,000 ppm, if it differs. Topping up from 2,500 to 4,000 ppm needs about 91 kg.

Background and insight

Volume is surface area times average depth. For a pool whose floor slopes evenly from the shallow end to the deep end, the average depth is the mean of the two. Hopper-bottom pools with a steep drop into a small deep area hold less than that average suggests, so treat the result as an upper bound for them. One cubic foot holds 7.4805 US gallons and one cubic metre is 1,000 litres.

Ovals come in two kinds. A true ellipse has area pi / 4 x length x width, which is where the trade shortcut of length x width x depth x 5.9 gallons comes from. Many above-ground "oval" pools are really straight-sided with round ends, which hold more; choose that shape for them. Kidney pools use the trade rule of thumb 0.45 x (width at one end + width at the other) x length, which is an approximation.

Chlorine dose is chemistry, not a chart. One part per million is one milligram per litre, so raising 10,000 US gallons (37,854 litres) by 1 ppm takes 37.9 grams of available chlorine. Liquid chlorine sold at 12.5 trade percent holds 125 grams of available chlorine per litre, which works out to about 10.2 fluid ounces. Cal-hypo at 65% needs about 2 ounces by weight. The side effects follow molar ratios: every 1 ppm of chlorine from trichlor adds about 0.6 ppm of cyanuric acid, from dichlor about 0.9 ppm, and from cal-hypo about 0.7 ppm of calcium hardness.

Common use cases

  • Opening and shocking

    Dose chlorine by the ppm you need instead of by a bottle label written for a different pool size.

  • Salt cell start-up

    Work out how many bags of salt bring the water to the chlorinator range.

  • Buying a pump or heater

    Pumps are sized by turnover time and heaters by volume, so both start from gallons.

  • Filling or topping up

    Estimate how long the hose needs to run and what the water bill will cover.

Tips and limitations

  • Make sure a new pool or spa is on your council's register; Hamilton, for example, has a form to add a pool to its register.
  • Liquid chlorine adds no stabiliser; tablets of trichlor add 0.6 ppm of stabiliser for every 1 ppm of chlorine, which builds up over a summer.
  • Store chlorine and acid apart and always add chemicals to water, never water to chemicals.
  • Before a big first fill, check whether your council has any water restrictions in place.

Sources and further reading

  1. Swimming pool monitoring, Hamilton City Council. Three-yearly inspections, the 2017 rules that replaced the Fencing of Swimming Pools Act 1987, and the lockable cover rule for small spa pools.
  2. Residential water services and wastewater charges 2026-2027, Watercare Services. Water $2.46 and wastewater $4.28 per 1,000 litres including GST from 1 July 2026; wastewater calculated at 78.5% of metered water.
  3. How residential charges work, Watercare Services

Frequently asked questions

How many litres is my pool NZ?

Litres = water surface area in m² x average depth in m x 1,000. A 9 x 4.5 m pool from 1.1 to 1.9 m deep is 40.5 m² x 1.5 m x 1,000 = 60,750 litres. A 10 x 5 m pool from 1 to 2 m deep holds 75,000 litres.

How much does it cost to fill a pool in Auckland?

From 1 July 2026 Watercare charges $2.46 per 1,000 litres for water and $4.28 per 1,000 litres for wastewater, which it calculates as 78.5% of your metered water. For 60,750 litres that is about $353.55 including GST.

Does a spa pool need a fence in NZ?

Not always. Hamilton City Council explains that spa pools with a water surface area under 5 m² and sides higher than 760 mm can have a lockable cover instead; larger spas, or ones with lower sides, need a barrier. Check with your own council.

How often are pools inspected in NZ?

Every residential pool must be inspected by the council every three years under the rules that took effect in 2017. Small spa pools with a lockable cover are not inspected. Hamilton City Council, for example, inspects every pool in the city once every three years and charges for extra audit time; your own council's pool page explains how it books inspections.

How much chlorine do I add to a 20,000 litre pool?

To raise free chlorine by 2 ppm in a 19,085-litre above-ground pool you need about 305 mL of 12.5% liquid chlorine or 59 g of 65% calcium hypochlorite. Scale up or down by the litres.

How long will it take to fill my pool with a garden hose?

Divide the litres by the flow. A hose delivering 15 litres a minute fills 60,750 litres in about 67.5 hours, and 20 litres a minute does it in about 51 hours. Time a bucket to measure your flow.

Is there an in-depth guide to the Pool Volume Calculator?

Yes. “Pool Volume and Chlorine Dosing: Gallons, ppm and Salt” covers the background, how it works, common pitfalls and worked examples. Read the full guide.