Australia version. Costs in A$ from your usage rate in c/kWh, 230 V appliances, and how flat, time-of-use and controlled load tariffs and the AER and Victorian default offers fit in. US version
Electricity Cost Calculator (Australia)
Work out what an appliance costs to run in Australian dollars from its watts and your usage rate in cents per kWh, with peak, off-peak and controlled load rates.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Electricity Cost Calculator?
Australian electricity bills charge a usage rate in cents per kWh and a daily supply charge in cents per day. Only the usage rate moves with how long an appliance runs, so that is what this calculator multiplies by. Enter it in dollars: a rate of 30 c/kWh is 0.30.
Which rate applies depends on your tariff. On a single rate (flat) tariff every kWh costs the same. On time of use, the same pool pump costs more in the peak window than overnight or in the middle of the day, and some homes have a controlled load circuit for hot water or a pool at a lower rate. Run the calculation with the rate for the hours the appliance actually runs.
The examples below use 30 c/kWh and 18 c/kWh as illustrations, not current prices. Your rate is on your bill, and you can compare plans for your postcode on Energy Made Easy, or Victorian Energy Compare in Victoria.
- Watts or amps x volts input, with quantity and standby draw
- Cost and kWh per hour, day, month and year
- Days-per-week setting for weekday or weekend use
- Typical appliance presets labelled as typical, with a comparison table at your price
- Any currency symbol; copy and share results
Updated
How to use the Electricity Cost Calculator
- Take the wattage from the appliance compliance plate or manual. For a reverse-cycle air conditioner, use the rated power input, not the heating or cooling capacity in kW.
- Enter hours used per day and days per week.
- Enter your usage rate in dollars: divide c/kWh by 100. Use the peak, shoulder or off-peak rate that matches when the appliance runs.
- Leave the daily supply charge out; it is paid for the connection regardless of use.
- Read the cost per quarter by multiplying the monthly figure by three if your bills come quarterly.
Worked examples
Pool pump on a flat rate or off-peak
Input
1,100 W, 6 h a day, every day; 30 c/kWh against an 18 c/kWh off-peak or controlled load rate (example rates)
Output
6.6 kWh a day; A$722.70 a year at 30 c, A$433.62 at 18 c
Moving the pump timer into a cheaper window saves the difference in the rate on every kWh, here about A$289 a year, without running the pump any less.
Reverse-cycle split system heating a living room
Input
1,800 W power input, 5 h an evening, every day, 30 c/kWh
Output
9 kWh and A$2.70 a day; about A$82.13 a month
A reverse-cycle unit delivers several kW of heat for each kW of power it draws, so use the input power from the label, not the capacity figure on the box.
Clothes dryer four times a week
Input
2,400 W, 1 h a load, 4 days a week; 30 c and 40 c/kWh
Output
2.4 kWh a load; A$150.17 a year at 30 c, A$200.23 at a 40 c peak rate
On a time-of-use tariff, drying in the evening peak costs a third more than at 30 c. A heat pump dryer uses less power for the same load.
Background and insight
A watt is a rate of energy use; a kilowatt-hour is 1,000 watts used for one hour. Energy = watts x hours / 1,000, and cost = kWh x price. Standby power is the small draw from chargers, set-top boxes and appliances with clocks or remote controls; at a few watts around the clock it adds up to tens of kWh a year per device.
Nameplate wattage is the most an appliance draws. Thermostat-controlled devices such as fridges, freezers, heaters and air conditioners cycle on and off, so their average draw over a day is much lower than the label. For those, measure with a plug-in energy meter or use the yearly kWh on an EnergyGuide label, and enter the average watts. Amps times volts gives apparent power; for motors and compressors the real power in watts can be noticeably lower.
Many bills add fixed daily charges, taxes and tiered or time-of-use rates. Use the energy charge per kWh for the period when the appliance runs; the fixed charges do not change with use.
Common use cases
Understanding a high bill
Price the big loads (heaters, dryers, AC, EV charging) to see which one moved the bill.
Comparing appliances before buying
Compare the yearly running cost of two models with different wattages to see if the efficient one pays back.
Home office and crypto rigs
Work out the electricity cost of a PC, server or workshop machine running long hours.
Landlords and shared houses
Split the cost of a shared appliance fairly by measured use.
Tips and limitations
- Look for the Energy Rating label on fridges, dryers, TVs and air conditioners: the kWh per year figure divided by 8,760 gives the average watts to enter for a 24-hour appliance.
- If you have rooftop solar, appliances running in the middle of the day use your own generation first. The cost of that power is the feed-in tariff you give up, not your usage rate.
- Controlled load tariffs only apply to appliances wired to that circuit, usually hot water and sometimes a pool pump.
- Quarterly bills cover about 91 days; multiply the daily cost by 91 for a quarter.
Sources and further reading
- Default market offer 2026-27: final determination, Australian Energy Regulator. Default Market Offer prices for 1 July 2026 to 30 June 2027 in NSW, south-east Queensland and South Australia.
- Victorian Default Offer, Essential Services Commission
- Energy Made Easy, Australian Energy Regulator. Government comparison of electricity plans and their usage rates by postcode.
Frequently asked questions
What is a normal electricity rate per kWh in Australia?
It depends on the state, distributor area, retailer and tariff, so there is no single figure. The Australian Energy Regulator sets the Default Market Offer for parts of New South Wales, south-east Queensland and South Australia, and the Essential Services Commission sets the Victorian Default Offer. Your own usage rate is on your bill.
What is the difference between the usage rate and the supply charge?
The usage rate is charged for every kWh you use. The supply charge is a fixed amount per day for being connected. This calculator uses only the usage rate, because the supply charge does not change when an appliance runs longer.
How do time-of-use tariffs change appliance running costs?
Each kWh is charged at the peak, shoulder or off-peak rate for the time it is used. Work out the cost twice, once at each rate the appliance falls into, or split the hours between two runs of the calculator.
Is a Default Market Offer the price I pay?
Only if you are on a standing offer in a region where it applies. The Default Market Offer for 2026-27, set by the AER and applying from 1 July 2026, is a maximum price for standing offers and a reference price for comparing market offers. Many households pay less on a market offer.
How much does it cost to run a pool pump?
Multiply the pump wattage by hours run and your rate. A 1,100 W pump running six hours a day uses 6.6 kWh, which is about A$1.98 a day at 30 c/kWh. Running it on a controlled load or off-peak rate cuts the cost in proportion.
How do I find my usage rate on my bill?
Look for a line in cents per kWh, sometimes split into peak, shoulder and off-peak, and a separate supply charge in cents per day. Some bills list rates before GST and add it at the end, so check which yours shows and add 10% if needed.
Is there an in-depth guide to the Electricity Cost Calculator?
Yes. “Roof Pitch, Stair Layout, AC Sizing and Running Costs Explained” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.