Canada version. Works in metres and litres to match Canadian pool chemical labels, shows US and imperial gallons too, and uses Health Canada's 1 to 3 ppm free chlorine range for home pools. US version
Pool Volume Calculator (Litres, Canada)
How many litres your above-ground or in-ground pool holds, with chlorine doses per 10,000 L as Canadian labels give them and the 1 to 3 ppm Health Canada range.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Pool Volume Calculator?
Pools in Canada are sold by their size in feet, an 18 ft round above-ground pool or a 16 x 32 in-ground pool, but the chemicals on the shelf are registered with Health Canada and their labels give doses in litres, kilograms and per 10,000 L. This version therefore works in metres and litres and shows US and imperial gallons beside them, since pump and heater manuals use either. An 18 ft (5.49 m) round pool with 1.2 m of water holds 28,406 L, which is 7,504 US gallons or 6,249 imperial gallons.
Health Canada recommends keeping free chlorine at 1 to 3 ppm in a residential pool and 3 to 5 ppm in a hot tub. Enter the shape and water depth, pick the product you use and the rise in free chlorine you want, and the tool gives the dose, the salt for a salt-water system and how long the hose will take to fill the pool at spring opening.
- Rectangle, round, ellipse, straight-sided oval, kidney and free-form shapes
- Sloping floors from shallow and deep depths
- US gallons, litres, cubic metres and imperial gallons at once
- Chlorine dose for liquid, bleach, cal-hypo, dichlor and trichlor, with CYA and calcium side effects
- Salt dose and fill time; everything runs in the browser
Updated
How to use the Pool Volume Calculator
- Convert the pool size from feet if needed: 18 ft is 5.49 m, 24 ft is 7.32 m, 16 x 32 ft is 4.88 x 9.75 m.
- Enter the water depth, not the wall height; measure from the floor to the water line, which sits partway up the skimmer.
- Choose the product: liquid chlorine at 10 or 12% is the common Canadian product, along with calcium hypochlorite and stabilized trichlor and dichlor.
- Enter how many ppm to raise free chlorine. Keep a home pool between 1 and 3 ppm.
- For a salt system, enter the salt reading and the target from the generator manual, and the size of the salt bags you buy.
Worked examples
18 ft round above-ground pool
Input
Round, 5.49 m diameter, 1.2 m of water, raise free chlorine by 2 ppm with 12.5% liquid chlorine
Output
28,406 L (7,504 US gal); 0.45 L of liquid chlorine
Liquid chlorine at 12.5% needs 80 mL per 10,000 L for each 1 ppm. Moving from 1 to 3 ppm takes the pool across the whole Health Canada range, so dose smaller amounts and test.
16 x 32 ft in-ground pool, 3.5 to 8 ft deep
Input
Rectangle 4.88 x 9.75 m, 1.07 to 2.44 m deep, raise by 2 ppm with cal-hypo 65%
Output
83,503 L (22,059 US gal); 257 g of cal-hypo
Each 2 ppm dose of cal-hypo adds about 1.4 ppm of calcium hardness, which builds up over a season if your fill water is already hard.
Starting a salt system in the same 18 ft pool
Input
28,406 L, salt 0 to 3,200 ppm, 20 kg bags
Output
90.9 kg of salt, five 20 kg bags
Salt chlorine generators sold in Canada must be registered by Health Canada; use the salt level in your unit's manual.
Background and insight
Volume is surface area times average depth. For a pool whose floor slopes evenly from the shallow end to the deep end, the average depth is the mean of the two. Hopper-bottom pools with a steep drop into a small deep area hold less than that average suggests, so treat the result as an upper bound for them. One cubic foot holds 7.4805 US gallons and one cubic metre is 1,000 litres.
Ovals come in two kinds. A true ellipse has area pi / 4 x length x width, which is where the trade shortcut of length x width x depth x 5.9 gallons comes from. Many above-ground "oval" pools are really straight-sided with round ends, which hold more; choose that shape for them. Kidney pools use the trade rule of thumb 0.45 x (width at one end + width at the other) x length, which is an approximation.
Chlorine dose is chemistry, not a chart. One part per million is one milligram per litre, so raising 10,000 US gallons (37,854 litres) by 1 ppm takes 37.9 grams of available chlorine. Liquid chlorine sold at 12.5 trade percent holds 125 grams of available chlorine per litre, which works out to about 10.2 fluid ounces. Cal-hypo at 65% needs about 2 ounces by weight. The side effects follow molar ratios: every 1 ppm of chlorine from trichlor adds about 0.6 ppm of cyanuric acid, from dichlor about 0.9 ppm, and from cal-hypo about 0.7 ppm of calcium hardness.
Common use cases
Opening and shocking
Dose chlorine by the ppm you need instead of by a bottle label written for a different pool size.
Salt cell start-up
Work out how many bags of salt bring the water to the chlorinator range.
Buying a pump or heater
Pumps are sized by turnover time and heaters by volume, so both start from gallons.
Filling or topping up
Estimate how long the hose needs to run and what the water bill will cover.
Tips and limitations
- Add chemicals to plenty of water, never water to chemicals, and do it outdoors.
- Ionizers and ozone units do not replace chlorine; Health Canada says a chlorine-based sanitizer is still needed.
- Pool fencing and gate rules are set by each municipality, so check your city bylaw before filling a new pool.
Sources and further reading
- Swimming pool and spa chemicals, Health Canada. Recommended free chlorine levels, registered products and chlorine generators.
- Swimming pool chemicals, Transport Canada, CANUTEC. Safe storage and mixing of pool chemicals.
Frequently asked questions
How many litres are in an 18 ft round pool?
About 28,400 L at 1.2 m of water (an 18 ft pool with a 52 in wall). At 1.07 m it is about 25,300 L. Use your actual water depth, which sits partway up the skimmer.
What chlorine level should a pool have in Canada?
Health Canada recommends free chlorine of 1 to 3 ppm for residential pools, including inflatable pools, and 3 to 5 ppm for residential spas and hot tubs.
How much liquid chlorine per 10,000 litres?
For 12.5% liquid chlorine, 80 mL raises 10,000 L by 1 ppm; for 10%, 100 mL. The hint under the chlorine field shows the figure for the product you pick.
Do I use US or imperial gallons for my pool?
Most pool equipment sold in Canada quotes US gallons, and chemical labels use litres. The tool shows litres first, US gallons beside them and imperial gallons in its own box, so you can match whichever manual you have.
How much salt does a salt-water pool need at opening?
Salt (kg) = (target minus current ppm) x litres / 1,000,000. An 18 ft pool of 28,400 L at 3,200 ppm needs about 91 kg from fresh water. After winter, test first: much of last year's salt is still in the water unless you drained a lot of it.
How long does it take to fill a pool with a garden hose?
Time a bucket to find your flow in L/min, then divide the volume by it. At 15 L/min a 28,400 L pool takes about 32 hours. A bulk water delivery by truck is much faster.
Is there an in-depth guide to the Pool Volume Calculator?
Yes. “Pool Volume and Chlorine Dosing: Gallons, ppm and Salt” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.