Canada version. Feet and inches for the forms, ready-mix in cubic metres as Canadian plants sell it, 25 kg and 30 kg bags, prices in CA$, and NBC Part 9 strengths. US version

Concrete Calculator (Canada)

Measure your slab or Sonotube footings in feet and inches, then order ready-mix in cubic metres or count 25 kg and 30 kg bags, with National Building Code strengths.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Concrete Calculator?

Canadian concrete jobs mix two systems. You measure the forms in feet and inches, but ready-mix plants quote and deliver by the cubic metre, and bagged mix on the shelf comes in 25 kg and 30 kg sacks. This version keeps your measurements in imperial and gives the order in m³ and the bag count for both sizes.

A 10 by 12 ft patio poured 4 in thick with 10% extra is 1.246 m³. That is 89 bags of 30 kg, which is close to 2.7 tonnes of dry mix to lift, against a single ready-mix order of 1.25 m³.

The National Building Code of Canada sets minimum strengths for Part 9 houses: 15 MPa for footings, foundation walls and piers, 20 MPa for floors other than garages, and 32 MPa for garage and carport floors and exterior steps, which also need 5 to 8% air entrainment when site-batched. Order the garage floor from the plant by strength and air content, not just by volume.

  • Six pour shapes: slab, footing, round column or hole, wall, curb and gutter, and steps with an optional landing
  • Imperial and metric inputs that convert in place when you switch
  • Bag counts for 40, 50, 60 and 80 lb and 20 or 25 kg bags from published yields
  • Ready-mix order rounded to an editable increment, plus cost for bags and ready-mix
  • Formula panel, copy and share link; runs entirely in the browser
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Concrete Calculator

  1. Leave units on imperial and enter lengths in feet, thickness and diameters in inches.
  2. Choose the shape: slab, footing, Sonotube or post hole (round column), wall or steps. Set the quantity for a row of identical footings.
  3. Under cost, set "Ready-mix sold by" to cubic metre and the order increment your plant uses.
  4. Pick 30 kg or 25 kg bags to match the store and check the yield printed on the bag.

Worked examples

Garage floor, 20 x 22 ft at 4 in

Input

Slab 20 x 22 ft x 4 in, 5% extra, ready-mix by m³

Output

4.361 m³ with extra (5.70 yd³); order 4.5 m³

At 466 bags of 20 kg or 311 of 30 kg, nobody bags a garage floor. NBC 9.3.1.6 calls for 32 MPa here, and site-batched mixes need 5 to 8% air, because garage floors face road salt and freeze-thaw cycles.

Backyard patio, 10 x 12 ft at 4 in

Input

Slab 10 x 12 ft x 4 in, 10% extra, 30 kg bags

Output

1.246 m³; 89 bags of 30 kg or 107 of 25 kg; ready-mix 1.25 m³

A patio that size is usually a ready-mix job unless access is impossible; a short load fee may still beat a day of mixing.

Six Sonotube deck footings

Input

Round column 10 in diameter x 4 ft deep, quantity 6, 10% extra

Output

0.408 m³; 30 bags of 30 kg (35 of 25 kg)

Footings must sit below the frost depth your municipality sets; 4 ft is used here only as an example. Five bags per tube is easy to mix in a wheelbarrow on site.

Background and insight

Bag counts use published yields rather than weight. The QUIKRETE Concrete Mix data sheet lists about 0.30 cubic feet for a 40 lb bag, 0.45 for 60 lb and 0.60 for 80 lb, and Sakrete gives the same 0.6 cubic feet for its 80 lb bag. Those yields are for mixed concrete, so a cubic yard (27 cubic feet) takes 45 bags of 80 lb or 60 bags of 60 lb. Kilogram bags sold outside the US are scaled from the 80 lb figure by weight, roughly 11.7 litres per 25 kg bag; the yield printed on your bag wins if it differs.

Ready-mix plants batch by the cubic yard or cubic metre and many dispatch in quarter-yard steps, so the calculator rounds up to an increment you can change. Small loads often carry a short-load fee, which is why a 1.4 yard patio can cost nearly as much as a 3 yard one. Normal-weight concrete weighs about 150 lb per cubic foot (2,400 kg per cubic metre), which matters if you are hauling bags in a car or checking a trailer limit.

Common use cases

  • Patios, sheds and hot-tub pads

    Size a slab and see whether 60-odd bags or one short ready-mix load makes more sense for the job.

  • Fence and deck posts

    Multiply one hole by the number of posts to buy the right pallet quantity in one trip.

  • Footings and piers

    Price square pads and round sonotube piers for a deck or small extension before calling the plant.

  • Curbs, edging and steps

    Handle the awkward L-shaped curb and gutter section and stacked steps without sketching volumes by hand.

Tips and limitations

  • NBC 9.16.4.3: a concrete floor slab must be at least 75 mm (about 3 in) thick, not counting any topping.
  • Do not pour on frozen ground or let fresh concrete freeze; CSA A23.1 governs cold-weather placing, and the plant can add accelerators or hot water.
  • Ask the plant whether it adds a short-load charge for small orders and what increment it delivers in.

Sources and further reading

  1. National Building Code of Canada 2025 (Division B, Part 9), National Research Council of Canada (Government of Canada Publications). Sentence 9.3.1.6 compressive strength, 9.3.1.7 mixes, 9.16.4.3 slab thickness.
  2. Codes Canada, National Research Council Canada
  3. Concrete mix quantity calculator (25 kg and 30 kg bags), Target Products (Quikrete Canada). Bag sizes sold in Canada.

Frequently asked questions

How many 30 kg bags of concrete make a cubic metre?

About 72. The calculator scales the bag yield by weight from the published 80 lb yield, which gives roughly 14 L per 30 kg bag. A 25 kg bag yields about 11.7 L, so 86 make a cubic metre.

Do Canadian ready-mix companies sell by the cubic yard or cubic metre?

Cubic metre. Plants batch and invoice in m³, though many contractors still estimate in yards. Set "Ready-mix sold by" to cubic metre and the tool converts your feet-and-inches pour.

What strength of concrete do I need for a garage floor in Canada?

The National Building Code requires at least 32 MPa at 28 days for garage and carport floors and exterior steps (30 MPa where local aggregates cannot reach 32 at a 0.45 water to cementing materials ratio), with 5 to 8% air entrainment for site-batched mixes. Your province may add to this.

How thick should a concrete slab be under the National Building Code?

At least 75 mm for a floor slab on ground, per NBC 9.16.4.3. Patios and garage floors are commonly poured thicker, around 100 mm (4 in), and driveways for heavy vehicles thicker again.

Can I pour concrete in cold weather?

Yes, with care. Fresh concrete must be kept from freezing until it gains strength, so plants supply heated or accelerated mixes and contractors use blankets or heated enclosures. Avoid pouring on frozen ground.

How many bags of concrete for a Sonotube?

A 10 in tube 4 ft deep holds about 0.062 m³, so five bags of 30 kg with a little extra. An 8 in tube the same depth takes four.

Is there an in-depth guide to the Concrete Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.