Canada version. Square feet first, as Canadian listings and flooring stores use, with m² alongside, CA$ prices, and notes on Alberta's Residential Measurement Standard. US version
Square Footage Calculator (Canada)
Total a house or condo in square feet and square metres, measured the way Canadian listings do, then price hardwood, vinyl plank or carpet per square foot in CA$.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Square Footage Calculator?
Canada is metric on paper but sells homes and flooring by the square foot. Listings quote sq ft, flooring stores price hardwood and vinyl plank per sq ft, and building plans may be in either unit. This version starts in feet and shows square metres beside every total.
What counts toward a home's size depends on where you are. In Alberta, licensees must follow the Residential Measurement Standard: detached homes are measured to the outside of the exterior walls at the foundation, condos paint to paint, only floors entirely above grade count, and open-to-below areas are left out. Elsewhere, ask the listing agent how the figure was measured.
For a renovation the measurement is simpler: the floor you will cover, wall to wall, plus a cutting allowance.
- Five shapes per section: rectangle, L-shape, circle, triangle and trapezoid
- Unlimited add and subtract rows (up to 20) with a running area per row
- Results in ft², m², yd², in², acres and hectares at once
- Cost by ft², yd² or m² with an optional waste percentage
- Shareable link that reopens every section exactly as entered
Updated
How to use the Square Footage Calculator
- Keep measurements in feet; switch to metres if your plan is metric.
- Add one section per room or per storey, using an L-shape where a wall steps.
- Set open-to-below areas or stairwells to subtract when you want an RMS-style total.
- Enter the price per square foot in CA$ and the waste for your flooring type.
Worked examples
Two-storey house measured RMS style
Input
Main floor 28 x 40 ft; upper floor 28 x 40 ft less a 10 x 12 ft open-to-below
Output
2,120 sq ft (196.95 m²)
Exterior dimensions at the foundation, basement excluded, open area removed, as the Alberta standard sets out. A finished basement can be measured but is not part of this figure.
Hardwood for an L-shaped living and dining room
Input
L-shape 18 x 14 ft plus 12 x 11 ft, 8% waste, CA$6.25 per sq ft
Output
384 sq ft; 414.72 sq ft to buy; CA$2,592
Boxes of hardwood are labelled with the square feet they cover, so divide 414.72 by the box size and round up.
One floor of a bungalow in metric
Input
Rectangle 28 x 40 ft
Output
1,120 sq ft = 104.05 m²
Useful when a builder's drawing is in millimetres and the listing is in square feet.
Background and insight
Square footage is a measure of area: length times width for a rectangle. The trap is the unit change. A square foot is 0.09290304 square metres exactly, because the international foot has been defined as 0.3048 m since 1959, but a square yard is 9 square feet, not 3, and an acre is 43,560 square feet. Converting a length and then squaring is safe; converting an area by the length factor is the error that produces a quote three times too small.
Splitting irregular shapes into rectangles and triangles is the same method surveyors use for plan areas, and it is exact as long as the pieces do not overlap. When they do, subtract the overlap or measure the pieces differently. For a home appraisal or listing, the gross living area follows local or ANSI Z765 rules about walls, stairs and ceiling height, which this calculator does not apply; it measures whatever you describe.
Common use cases
Flooring and carpet
Measure every room and closet as separate sections, subtract fixed cabinets, and price the total with a waste allowance.
Painting and wall coverings
Treat each wall as a rectangle and subtract windows and doors to estimate paint or wallpaper coverage.
Sod, seed and landscaping
Combine curved beds (circles and trapezoids) and lawns, then convert to square yards or acres for supplier quotes.
Rent and real-estate checks
Sanity-check a listed square footage or compare price per square foot between properties.
Tips and limitations
- Under the Alberta standard, a ceiling must be at least 2.13 m (7 ft) somewhere in the room, and sloped areas count only where the height is at least 1.52 m (5 ft).
- Condominium registered sizes from the land titles plan can include walls, parking and storage, so they are not comparable with an RMS figure.
- Measure flooring to the middle of door openings so transitions are included.
Sources and further reading
- Residential Measurement Standard, Real Estate Council of Alberta. Exterior measurement for detached homes, paint to paint for condos, above-grade floors only.
- Weights and Measures Act, Justice Laws Website, Government of Canada. Canadian units of measurement, metric and imperial.
Frequently asked questions
Is the basement included in square footage in Canada?
Under Alberta's Residential Measurement Standard, no: only floor levels entirely above grade count; a below-grade level may be measured, but not included in the RMS area. Other provinces have no single rule, so listings vary; ask how a figure was measured.
Are house sizes measured from inside or outside the walls?
For detached homes in Alberta, from the exterior walls at the foundation; for apartment-style condos, paint to paint on the inside. Exterior measurement gives a bigger number for the same house.
How do I convert square feet to square metres?
Multiply by 0.0929 (exactly 0.09290304). A 1,120 sq ft floor is 104.05 m². To go the other way, multiply square metres by 10.764.
How much extra flooring should I buy?
Plan on 5 to 10% for straight-laid plank in simple rooms, more for diagonal layouts, herringbone and rooms with many corners. Keep a spare box for repairs.
Why is my condo smaller than the size on the title plan?
The registered unit size can include wall thicknesses, parking, storage and balconies, which a paint-to-paint measurement leaves out.
Is there an in-depth guide to the Square Footage Calculator?
Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.