United Kingdom version. Written for the UK: the PSTI regime banning universal default passwords and requiring a stated support period, NCSC device guidance, and the UK reporting routes. US version

Home Network Security Checklist (UK)

UK law now bans universal default passwords on consumer devices, so check yours, change the router admin login and separate your smart devices.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Home Network Security Checklist?

The UK has a rule here that most countries do not, and it changes what you should check. Under the Product Security and Telecommunications Infrastructure regime, consumer connectable products sold in the UK must not have universal default passwords, must provide a means to report security issues, and must state the minimum period for which they will receive security updates.

That last requirement is the useful one for a buyer. A manufacturer must tell you how long the device will be supported, which turns "is this smart plug a liability" from guesswork into something you can look up before buying. For devices you already own, the practical question is whether they still receive updates at all.

Everything else follows the usual order: change the router administration password, which is not the same as the wifi password, keep firmware updated, and put smart devices on a separate network so that a compromised camera cannot reach your laptop.

  • Uses the UK PSTI requirements, including stated security update periods
  • Separates router administration credentials from wifi access
  • Covers DNS tampering, WPS, UPnP and remote administration
  • Names UK reporting routes for scams and non-compliant products
  • Tick, reword and delete items, then export as a Google Form, PDF, CSV or Markdown
Read the guide: Why Checklists Work, and How to Use One Properly

Updated

How to use the Home Network Security Checklist

  1. Change the router administration password, which is separate from the wifi password, and store it in a password manager.
  2. Check the firmware is current and whether your provider still supports the model at all.
  3. Move smart devices onto the guest network, away from computers and phones.
  4. Turn off WPS, UPnP and remote administration unless you specifically need them, and verify DNS settings.
  5. Check whether each device still receives security updates, using the stated support period PSTI requires.

Worked examples

Buying a smart doorbell

Input

Purchase section, Essentials only

Output

Stated support period checked before buying

UK rules require manufacturers to state the minimum period of security updates, which turns support lifetime from guesswork into a published figure you can compare.

Wifi password changed, nothing else

Input

Router items

Output

Administration password changed as well

The wifi password lets devices join; the administration password lets anyone alter the network including DNS. Changing only the first leaves the more serious door open.

Five smart devices on the main network

Input

Segmentation items

Output

Moved to the guest network

A compromised camera on the same network as a laptop is a path to your data; on a guest network it is a nuisance. On most routers this is one toggle.

Provider router from seven years ago

Input

Hardware items

Output

Replacement requested from the provider

An unsupported router that no longer receives firmware updates cannot be configured into safety, so replacing the hardware is the only real fix.

Background and insight

Router administration and wifi access are two different credentials and conflating them is the most common home network mistake. The wifi password lets a device join the network; the administration password lets anyone change the network’s settings, including DNS, which is how a compromised router silently redirects traffic. Many people have changed the first and never touched the second.

DNS settings are worth checking specifically after any suspicion of compromise, because altering them is a quiet and durable attack: every device on the network then resolves names through an attacker’s server while everything appears to work normally.

Guest networks are the cheap version of network segmentation. Putting smart televisions, cameras, speakers and plugs on the guest network keeps them away from computers and phones holding your data, and on many consumer routers it is a single toggle. Where the router supports VLANs the separation is stronger, but the guest network is the version most households will actually do.

WPS and UPnP both trade security for convenience. WPS has known weaknesses in some implementations and UPnP can let a device open ports through the firewall without you knowing, so both are usually better off unless something specific needs them. Remote administration from the internet should be off unless you deliberately rely on it.

Internet service provider routers are often the weak point because they are rarely replaced and sometimes stop receiving firmware updates while remaining in service. Where your provider has stopped supporting a model, asking for a replacement or buying your own is the fix rather than more configuration.

For reporting, the NCSC provides guidance and a route for reporting vulnerabilities, suspicious emails go to the Suspicious Email Reporting Service, and texts go to 7726. A product that appears to breach the PSTI requirements, such as one shipping with a universal default password, can be raised with the Office for Product Safety and Standards.

Finally, the devices that cannot be secured. A camera or baby monitor out of support, with no update mechanism and a cloud service you cannot verify, is not a configuration problem. Either isolate it on the guest network and accept the risk, or remove it, because the middle option does not exist.

Common use cases

  • Before buying a smart device

    The support period UK rules make you publish.

  • A first proper router check

    Admin password, firmware, DNS and the toggles.

  • Households full of smart devices

    Guest network segmentation in one step.

  • Old or unsupported kit

    When configuration stops being the answer.

Tips and limitations

  • Look up the stated support period before buying; UK rules require manufacturers to publish it.
  • The router admin password is the one that matters most and the one nobody changes.
  • Check DNS settings after any suspicion of compromise.
  • Guest network for smart devices is one toggle and real separation.
  • A device out of support is not a configuration problem.

Sources and further reading

  1. The UK Product Security and Telecommunications Infrastructure (Product Security) regime, UK Government. Default password ban, vulnerability reporting and update periods
  2. Device security guidance, National Cyber Security Centre. Device configuration, updates and network separation
  3. Report internet scams and phishing, UK Government. Reporting routes for suspicious messages

Frequently asked questions

What does UK law require of smart devices?

Under the Product Security and Telecommunications Infrastructure regime, consumer connectable products sold in the UK must not use universal default passwords, must provide a way to report security issues, and must state the minimum period for which security updates will be provided.

How do I check how long a device will be supported?

The manufacturer must state a minimum security update period for products sold in the UK, so it should be findable on the product page or documentation. For devices you already own, check whether updates are still being issued at all.

What is the difference between the router admin password and the wifi password?

The wifi password lets a device join the network. The administration password lets anyone change the network’s configuration, including DNS, which is how a router can be made to redirect traffic silently. Most people change the first and never the second.

Why put smart devices on a guest network?

Because it separates them from the computers and phones holding your data, so a compromised camera or speaker becomes a nuisance rather than a route in. On most consumer routers it is a single setting, which makes it the segmentation households actually do.

Should I turn off WPS and UPnP?

Usually yes. WPS has known weaknesses in some implementations and UPnP can let a device open firewall ports without your knowledge. Remote administration from the internet should also be off unless you deliberately depend on it.

What do I do about a device that no longer gets updates?

Isolate it on the guest network and accept the residual risk, or remove it. An unsupported device with no update mechanism cannot be configured into safety, and that applies to provider routers still in service years after support ended.

Is there an in-depth guide to the Home Network Security Checklist?

Yes. “Why Checklists Work, and How to Use One Properly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.