Home Network Security Checklist

Change the router admin password, update the firmware, turn off remote admin and WPS, and put smart devices on a guest network so a camera cannot reach your files.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Home Network Security Checklist?

Your router is the device every other device depends on, and it is usually running the password printed on its underside with firmware from years ago. Almost everything on this list is a one-hour job done once, and the single most important item is the one people conflate with another: the admin password is not the wifi password.

After the router, the problem is the devices. Default credentials on cameras, printers and smart plugs are the most exploited weakness in home networks, and an unsupported device never gets fixed.

  • Separates the router admin password from the wifi password, which people conflate
  • Names the settings to turn off: remote admin, WPS, WEP and UPnP
  • Uses the router's own device list as the inventory
  • Treats a guest network as the structural fix that limits every other failure
  • Editable and exportable as PDF, CSV, Markdown or a Google Form
Read the guide: Why Checklists Work, and How to Use One Properly

Updated

How to use the Home Network Security Checklist

  1. Change the router admin password, which is separate from the wifi password, and update the firmware.
  2. Set a long unique wifi password, use WPA3 or WPA2, and turn off WPS, WEP, UPnP and remote admin.
  3. Inventory connected devices from the router, and change every default device password.
  4. Put smart devices and visitors on a guest network, and disconnect anything unsupported.
  5. Turn on two-factor for camera and smart home accounts, review who else has access, and repeat yearly.

Worked examples

Never touched the router

Input

Router section

Output

Admin password changed, firmware updated, WPS and UPnP off

Default admin credentials are published lists.

A house full of smart devices

Input

Devices section

Output

Inventory taken, defaults changed, guest network created

A compromised doorbell should not reach your backups.

An old camera

Input

Retire item

Output

Unsupported device disconnected

A device that no longer gets updates never gets fixed.

Background and insight

The router's admin password controls its settings and is separate from the wifi password that joins the network. Default admin credentials for most models are published lists, which is why changing it comes first. Firmware matters for the same reason: routers are rarely updated, are a standard target, and one that no longer receives updates should be replaced rather than tolerated.

Three settings are worth turning off outright. Remote administration from the internet exposes the admin page to the whole world and almost nobody needs it. WPS is broken and frequently on by default. UPnP lets any device on your network open a hole through the firewall without asking you. WEP should not be in use at all; WPA3 if available, WPA2 otherwise.

On the device side, the router's own connected-device list is the fastest inventory available, and most households find something they cannot identify or had forgotten. Changing the default password on everything that has one addresses the most exploited weakness in consumer devices, and automatic updates should be on wherever they exist.

A guest network is the highest-value structural change. Putting smart devices and visitors on it means a compromised doorbell or a guest's laptop cannot reach your computers, your network storage or your backups. It takes a few minutes on most routers and limits the damage of everything else going wrong.

The accounts behind the devices deserve as much attention as the devices. A camera or doorbell account is video of your home, so two-factor there is not optional, and reviewing who else has access, former housemates, ex-partners, tradespeople, old guest accounts, is a step people never think to take. Finally, repeat the list annually: devices accumulate, support ends quietly, and settings sometimes reset after a firmware update.

Common use cases

  • A yearly household security pass

    An hour that covers the router, the devices and the accounts behind them.

  • Moving into a new home

    New router, new provider, and the settings to change before connecting anything.

  • Smart home owners

    Guest network separation and the accounts that hold video of your house.

  • Working from home

    Keeping work devices away from a network full of consumer gadgets.

Tips and limitations

  • The admin password and the wifi password are different things. Change both.
  • If your router no longer receives firmware updates, replace it rather than tolerate it.
  • Check the router's connected-device list. Most households find something they cannot identify.
  • Rename the network to something that does not give your surname, address or router model.
  • Review who still has access to your cameras and locks, including people who have moved out.

Sources and further reading

  1. Home Network Security, Cybersecurity and Infrastructure Security Agency. Router settings and network segmentation
  2. How To Secure Your Home Wi-Fi Network, Federal Trade Commission. Encryption, default passwords, WPS and UPnP
  3. Securing Your Internet-Connected Devices at Home, Federal Trade Commission. Smart device defaults, updates and retirement

Frequently asked questions

What is the difference between the router admin password and the wifi password?

The wifi password joins devices to the network. The admin password controls the router's settings, including the firewall and port forwarding. Default admin credentials for most models are published, which makes changing it the first and most important step.

Should I turn off WPS and UPnP?

Yes in almost all cases. WPS is broken and often enabled by default. UPnP lets any device on your network open a hole through the firewall without asking you. Turn off remote administration from the internet too, since almost nobody needs it.

Why should smart devices be on a guest network?

So a compromised doorbell, camera or smart plug cannot reach your computers, network storage or backups. It takes a few minutes to set up on most routers and it limits the damage when one of those devices turns out to be insecure.

How do I see what is connected to my wifi?

The router's own admin page has a connected-device list, which is the fastest inventory available. Most households find something they cannot identify or had forgotten about entirely, and that is exactly what you are looking for.

What should I do about devices that no longer get updates?

Disconnect them. An unsupported camera or smart device never receives another security fix, so any flaw found in it stays open permanently. If the function matters, replace the device rather than keeping it on the network.

Is there an in-depth guide to the Home Network Security Checklist?

Yes. “Why Checklists Work, and How to Use One Properly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.