India version. Works in mm and cc, and shows the engine sizes that decide the GST rate on new vehicles in India: 1200 cc petrol, 1500 cc diesel and 350 cc for motorcycles. US version

Engine CC Calculator

Find engine cc from bore and stroke in mm for cars and bikes, and see how close an engine sits to the 1200 cc, 1500 cc and 350 cc lines used for GST on vehicles.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Engine Displacement Calculator?

In India engine size is quoted in cc on the brochure, the RC and the insurance policy, and it does more than describe the engine. Since the GST changes effective 22 September 2025, a petrol, LPG or CNG car with an engine up to 1200 cc and a length up to 4000 mm, or a diesel up to 1500 cc and 4000 mm, is a small car taxed at 18%; cars over 1500 cc or longer than 4000 mm are at 40%. Petrol cars above 1200 cc are not small cars under FAQ 26, so check the rate notification for the 1201 to 1500 cc band. Motorcycles up to and including 350 cc are at 18%, and those above 350 cc at 40%.

This version starts in millimetres with a four-cylinder of 73 mm bore and 71.5 mm stroke. Enter any engine's bore, stroke and cylinder count to get the cc, or switch "Solve for" to Bore and enter 1200 to see the largest bore that keeps a given stroke under the line. The overbore field shows what a 0.5 mm oversize piston would add after a rebore.

  • Displacement in cc, litres and cubic inches at once, with per-cylinder volume
  • Solve for bore or stroke from a target displacement in any of the three units
  • Overbore gain, bore/stroke ratio with oversquare or undersquare label, and mean piston speed
  • Inch and millimetre inputs that convert in place, plus a table for other cylinder counts
  • Copy results and share a link with your inputs
Read the guide: Engine Displacement Explained: Bore, Stroke, CC and Cubic Inches

Updated

How to use the Engine Displacement Calculator

  1. Choose inches or millimetres for bore and stroke.
  2. Leave "Solve for" on Displacement and enter bore, stroke and the number of cylinders.
  3. Read total displacement in cc, litres and cubic inches, plus the per-cylinder volume and bore/stroke ratio.
  4. To plan a rebore, enter the oversize (for example 0.030 in) and read the new displacement and the gain.
  5. To hit a target size, switch "Solve for" to Bore or Stroke, enter the target in cc, litres or cubic inches, and read the required dimension.

Worked examples

A 1.2 litre petrol four under the 1200 cc line

Input

73 mm bore, 71.5 mm stroke, 4 cylinders, 0.5 mm overbore

Output

1,197.02 cc; 1,213.47 cc after a 0.5 mm rebore

At standard size the engine is 3 cc inside the small-car limit. Solving for bore at 1200 cc gives 73.09 mm, so there is less than 0.1 mm of headroom in bore for a design that must stay under it.

A 350 cc single and the motorcycle GST line

Input

72 mm bore, 85.8 mm stroke, 1 cylinder, 0.5 mm overbore

Output

349.34 cc; 354.20 cc after the rebore

A long-stroke single at these dimensions lands just under 350 cc, the upper edge of the 18% slab. The bore/stroke ratio of 0.84 makes it undersquare, typical of torquey single-cylinder bikes.

Diesel bore for a 1500 cc limit

Input

Solve for bore, 88 mm stroke, 4 cylinders, target 1500 cc

Output

Bore 73.66 mm

A diesel small car may have up to 1500 cc. With an 88 mm stroke the bore must stay at or below about 73.7 mm to fit.

Background and insight

One cylinder sweeps a cylinder of air with the bore as its diameter and the stroke as its height: V = π/4 x bore² x stroke. Multiply by the cylinder count for the engine total. Because bore is squared, it moves displacement faster than stroke does: a 1% larger bore adds about 2% volume, a 1% longer stroke adds 1%. One cubic inch is exactly 16.387064 cc, since the inch is defined as 25.4 mm.

Advertised sizes are rounded. A Honda K20 is 86 x 86 mm, which works out to 1,998.2 cc and is sold as a 2.0 litre; Ford's 302 measures 301.6 cu in. Rotary and two-stroke engines are counted differently for racing and tax purposes, so check the rulebook if a class limit is at stake.

The bore/stroke ratio says something about character. Oversquare engines (ratio above 1) have room for larger valves and lower piston speed at a given rpm, so they tend to rev; undersquare engines trade that for a compact chamber and strong low-speed torque. Mean piston speed, 2 x stroke x rpm, is a rough check on how hard the rotating parts work: around 20 m/s is common for road engines at their redline, and racing engines run higher with lighter parts.

Common use cases

  • Engine builds and strokers

    Plan the bore and stroke combination that reaches a target size, and see what a rebore adds before the block goes to the machine shop.

  • Class and registration limits

    Check a motorcycle, kart or race engine against a displacement limit after an overbore.

  • Spec sheet checks

    Confirm a quoted engine size from published bore and stroke, and convert between cc, litres and cubic inches.

  • Teaching engine basics

    Show how bore, stroke and cylinder count combine, and why bore has twice the effect of stroke on volume.

Tips and limitations

  • The GST slab applies when the vehicle is sold, on its rated capacity. The calculator shows how close an engine is to a line; it is not a tax ruling, so check the GST notification or a tax adviser for a specific vehicle.
  • The 4000 mm length condition matters as much as cc for cars: a 1197 cc car longer than 4 metres does not count as a small car.
  • Mechanics quote oversize pistons in mm steps (0.25, 0.50, 1.00 mm). Enter the step in the overbore field to see the new cc.
  • Your RC and policy record the engine's cubic capacity. Changes to a registered vehicle's particulars are a matter for the RTO, so ask before altering the engine.

Sources and further reading

  1. Frequently Asked Questions on the decisions of the 56th GST Council, GST Council / Ministry of Finance. Small-car definition (1200 cc petrol, 1500 cc diesel, 4000 mm), 40% above, motorcycles at 350 cc, effective 22 September 2025
  2. Engine displacement, Wikipedia. Swept volume and how it is quoted

Frequently asked questions

How do I calculate engine cc from bore and stroke?

cc = 0.7854 x bore² x stroke x cylinders, with bore and stroke in centimetres. For 73 mm x 71.5 mm and four cylinders: 0.7854 x 7.3² x 7.15 x 4 = 1,197 cc.

Which cars count as small cars for GST?

The GST Council FAQs define them as petrol, LPG or CNG cars up to 1200 cc and up to 4000 mm long, and diesel cars up to 1500 cc and up to 4000 mm long. They attract 18% GST; vehicles over 1500 cc or longer than 4000 mm attract 40%.

Is a 350 cc motorcycle taxed at 18% or 40%?

18%. The FAQs say the 40% rate applies only to motorcycles exceeding 350 cc, so 350 cc and below are in the 18% slab.

Why is a "1.2 litre" engine 1197 cc and not 1200?

Engine sizes are rounded for the badge. The exact figure comes from the bore and stroke the maker chose, and many Indian 1.2 litre engines are designed just under 1200 cc.

How much cc does a rebore add?

It depends on the bore, because volume rises with its square. On the 73 mm four, a 0.5 mm oversize adds about 16 cc in total; on a 72 mm single it adds about 5 cc.

Is there an in-depth guide to the Engine Displacement Calculator?

Yes. “Engine Displacement Explained: Bore, Stroke, CC and Cubic Inches” covers the background, how it works, common pitfalls and worked examples. Read the full guide.