India version. Room sizes in feet, paint in litres with sq ft per litre coverage, 20, 10, 4 and 1 litre packs, rupee prices, and the primer and putty steps Indian paint makers list. US version
Paint Calculator (India)
Work out litres of wall paint for a room measured in feet from coverage in sq ft per litre and coats, then the 20, 10, 4 and 1 litre packs to buy, in rupees.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Paint Calculator?
In India rooms are measured in feet but paint is sold in litres, and pack labels give coverage in square feet per litre. This version works in exactly that mix: lengths and areas in feet, paint in litres, packs of 20, 10, 4 and 1 litre.
A 12 by 10 foot bedroom with a 10 foot ceiling has 440 sq ft of wall. Take off a 3 by 7 foot door and a 4 by 4 foot window and 403 sq ft is left to paint, plus 120 sq ft of ceiling. At 260 sq ft per litre for each coat, two coats need 4.02 litres, so the calculator suggests a 4 litre and a 1 litre pack.
Coverage depends heavily on the product. Asian Paints gives 250 to 270 sq ft per litre for the first coat of Tractor Emulsion Shyne on a normal masonry surface and 130 to 150 sq ft per litre for the second coat. The examples here use 260 sq ft per litre for every coat; for a paint whose second coat covers less, run the second coat separately at its own figure. Premium emulsions, textures and exterior paints differ, so use the figure for the paint you buy.
- Walls, ceiling or both, with doors, windows and other areas subtracted
- Separate coat counts for walls and ceiling, plus optional primer
- Shopping list in 5 gallon, 1 gallon and quart sizes, or 10, 5, 2.5 and 1 litre tins
- Imperial and metric inputs that convert when you switch
- Cost from your own can prices, copy and share link, all in the browser
Updated
How to use the Paint Calculator
- Choose "Feet, litre tins" for the units and keep the pack sizes on 20, 10, 4 and 1 L.
- Enter the room length, width and height in feet. Doors are about 3 x 7 ft (21 sq ft); measure windows and grilles.
- Enter the coverage per coat from the product page or pack. If it is quoted for two coats, double it before entering, because the calculator multiplies by the number of coats.
- Add a primer coat if you are painting new plaster or putty, with the primer coverage from its own pack.
- Enter pack prices in rupees to see the cost of the suggested packs.
Worked examples
Bedroom, 12 x 10 ft, walls and ceiling
Input
10 ft high, 1 door (21 sq ft), 1 window (16 sq ft), 2 coats, 260 sq ft per litre per coat
Output
523 sq ft painted; 4.02 L; buy a 4 L and a 1 L pack
The walls take 3.10 L and the ceiling 0.92 L. With walls only, a single 4 L pack covers it.
Four rooms of a 2BHK at the same size
Input
4 rooms of 12 x 10 ft, 10 ft high, walls and ceiling, 2 coats, 260 sq ft per litre
Output
2,092 sq ft painted; 16.09 L; buy a 10 L and two 4 L packs
At the MRPs listed for Tractor Emulsion Shyne (₹2,900 for 10 L and ₹1,250 for 4 L) that mix is ₹5,400, against ₹5,550 for a single 20 L pack, so the smaller packs are slightly cheaper here.
Repainting the bedroom walls only
Input
12 x 10 ft, 10 ft high, 1 door and 1 window, walls only, 2 coats, 260 sq ft per litre
Output
403 sq ft; 3.10 L; one 4 L pack (₹1,250 at the listed MRP)
The 0.9 L left over is enough for touch-ups. For new plaster, add the primer coats with the coverage from the primer pack; the calculator lists them as a separate purchase.
Background and insight
Coverage is the number that matters most and the one people skip. Manufacturers state a spreading rate for one coat at the film thickness the paint is designed for, usually on a smooth, sealed surface. Rough or porous surfaces, bare drywall, fresh plaster and textured ceilings soak up more, so the real figure can fall to 250 square feet per gallon or lower. Big colour changes, especially light over dark, often need a third coat or a tinted primer. That is why the calculator lets you choose a surface preset or type the figure from your can.
Openings are subtracted by area. A standard interior door of 3 by 7 feet is 21 square feet and a 3 by 5 foot window is 15 square feet, which are the defaults. Painters often ignore small windows because cutting in around them uses nearly as much paint as the glass would have taken; subtracting them gives the leanest honest estimate, and the extra percentage puts some back.
Two coats are the norm for new colour on walls. The first coat hides most of the old colour and evens out porosity; the second gives the uniform sheen and colour the manufacturer tested. Ceilings in flat white over the same white are often fine with one coat.
Common use cases
Repainting a room
Check whether one gallon is enough or you need two before driving to the store, and avoid opening a second batch mid-wall.
New drywall
Add a primer coat with its own coverage figure so the primer and finish paint are bought together.
Whole-house quotes
Price several identical bedrooms at once and compare 5 gallon buckets against single gallons.
Ceilings only
Estimate ceiling white for a whole floor, where one coat over the same colour is often enough.
Tips and limitations
- New masonry needs time to cure before painting; Asian Paints advises 28 days for its emulsion on new walls.
- Many emulsions are diluted with water before use, and the coverage on the pack assumes the stated dilution.
- Since the 2016 lead rules, household and decorative paints sold in India must not contain more than 90 ppm of lead and must say so on the label.
- Buy all the packs of one shade together and mix them in a bucket so every wall matches.
Sources and further reading
- Regulation of Lead Contents in Household and Decorative Paints Rules, 2016 (G.S.R. 1030(E), Gazette of India), Ministry of Environment, Forest and Climate Change (copy of the notification on the India Environment Portal). The 90 ppm lead limit and labelling rule for household and decorative paints.
- Tractor Emulsion Shyne, Asian Paints. Coverage in sq ft per litre, pack sizes of 1, 4, 10 and 20 L with MRPs, dilution, curing and the primer and putty sequence.
Frequently asked questions
How much paint is needed for a 12 x 10 room?
With 10 foot walls, one door and one window, the walls are 403 sq ft and the ceiling 120 sq ft. At 260 sq ft per litre for each of two coats that is about 4 litres for walls and ceiling, or 3.1 litres for the walls alone.
How many sq ft does 1 litre of paint cover?
It depends on the paint. For Tractor Emulsion Shyne, Asian Paints gives 250 to 270 sq ft per litre for the first coat and 130 to 150 sq ft per litre for the second coat on normal masonry. Rough walls and textures cover less.
How do I convert two-coat coverage for the calculator?
The calculator asks for coverage per coat and multiplies by the number of coats. If a pack gives one figure for two coats, such as 140 sq ft per litre, enter 280 with 2 coats, or 140 with 1 coat. If it gives separate first-coat and second-coat figures, run each coat with its own figure and add the litres.
Should I buy a 20 litre bucket or smaller packs?
Compare the prices. The calculator suggests the least total paint that covers the job, and you can enter each pack price to see the cost. Sometimes a 10 L plus 4 L packs cost less than a 20 L bucket you will not finish.
Do I need putty and primer before painting?
For new plaster or patched walls, paint makers list a primer coat, wall putty and a second primer coat before two top coats. Repainting a sound wall in a similar shade often needs only the top coats.
Is there a limit on lead in house paint in India?
Yes. The Regulation of Lead Contents in Household and Decorative Paints Rules, 2016 limit lead to 90 ppm and require the label to say the paint meets that limit.
Is there an in-depth guide to the Paint Calculator?
Yes. “How Much Paint Do I Need? Coverage, Coats and Cans” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.