India version. Feet and sq ft as Indian property is quoted, sq yards (gaj) and m² for plots, rupee prices per sq ft, and RERA's definition of carpet area. US version

Carpet Area and Square Feet Calculator (India)

Add up room sizes in feet to find carpet area in sq ft as RERA defines it, convert plots to sq yards (gaj) and m², and work out the price per sq ft in rupees.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Square Footage Calculator?

Indian flats are sold per square foot, and the number that matters legally is the carpet area. Under section 2(k) of the Real Estate (Regulation and Development) Act, 2016, carpet area is the net usable floor area of an apartment, excluding external walls, service shafts, exclusive balconies or verandahs and exclusive open terraces, but including internal partition walls. Built-up and super built-up figures add walls, balconies and a share of common areas, so they are always larger.

You can check a builder's carpet area by measuring the rooms. A 2BHK with a 12 x 15 ft living room, bedrooms of 12 x 11 and 11 x 10 ft, an 8 x 10 ft kitchen and two 5 x 7 ft toilets has 572 sq ft of room area. At ₹8,500 per sq ft that is ₹48,62,000, or ₹48.62 lakh. Internal walls count toward carpet area, so the RERA figure should be a little higher than the room total, not lower.

For plots, many states quote square yards (gaj). A 30 x 40 ft site is 1,200 sq ft, which is 133.33 sq yd or 111.48 m².

  • Five shapes per section: rectangle, L-shape, circle, triangle and trapezoid
  • Unlimited add and subtract rows (up to 20) with a running area per row
  • Results in ft², m², yd², in², acres and hectares at once
  • Cost by ft², yd² or m² with an optional waste percentage
  • Shareable link that reopens every section exactly as entered
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Square Footage Calculator

  1. Keep measurements in feet and add one rectangle per room, kitchen and toilet.
  2. Leave balconies out for carpet area; add them as their own sections if you want the balcony area separately.
  3. Read the total in sq ft, sq yd and m².
  4. Enter the rate per sq ft in ₹ to see the price for that area.

Worked examples

Checking the carpet area of a 2BHK

Input

Rooms 12 x 15, 12 x 11, 11 x 10, 8 x 10, 5 x 7 and 5 x 7 ft; ₹8,500 per sq ft

Output

572 sq ft (53.14 m²); ₹48,62,000

Add the area under internal walls to compare with the RERA carpet area. If the agreement shows much less, ask how it was measured.

A 30 x 40 plot in gaj

Input

Rectangle 30 x 40 ft

Output

1,200 sq ft = 133.33 sq yd = 111.48 m²

One square yard is 9 sq ft, so divide sq ft by 9 for gaj. Local land units such as guntha, cent or bigha vary by state, so convert those with the state's definition.

A balcony left out of carpet area

Input

Balcony 4 x 10 ft

Output

40 sq ft

RERA excludes an exclusive balcony from carpet area, but promoters disclose its area separately. Price the flat on carpet area and treat the balcony as a separate line.

Background and insight

Square footage is a measure of area: length times width for a rectangle. The trap is the unit change. A square foot is 0.09290304 square metres exactly, because the international foot has been defined as 0.3048 m since 1959, but a square yard is 9 square feet, not 3, and an acre is 43,560 square feet. Converting a length and then squaring is safe; converting an area by the length factor is the error that produces a quote three times too small.

Splitting irregular shapes into rectangles and triangles is the same method surveyors use for plan areas, and it is exact as long as the pieces do not overlap. When they do, subtract the overlap or measure the pieces differently. For a home appraisal or listing, the gross living area follows local or ANSI Z765 rules about walls, stairs and ceiling height, which this calculator does not apply; it measures whatever you describe.

Common use cases

  • Flooring and carpet

    Measure every room and closet as separate sections, subtract fixed cabinets, and price the total with a waste allowance.

  • Painting and wall coverings

    Treat each wall as a rectangle and subtract windows and doors to estimate paint or wallpaper coverage.

  • Sod, seed and landscaping

    Combine curved beds (circles and trapezoids) and lawns, then convert to square yards or acres for supplier quotes.

  • Rent and real-estate checks

    Sanity-check a listed square footage or compare price per square foot between properties.

Tips and limitations

  • Check the carpet area in the registered project details on your state RERA website before signing the agreement.
  • Loading, the gap between super built-up and carpet area, is not defined in RERA; compare flats on carpet area only.
  • Measure wall to wall at floor level, inside skirting.

Sources and further reading

  1. Ministry of Housing and Urban Affairs, Government of India. The ministry responsible for RERA, including the section 2(k) carpet area definition.
  2. Real Estate (Regulation and Development) Act, 2016, Ministry of Housing and Urban Affairs, Government of India. The Act on the ministry's RERA portal, including the disclosure of carpet area for sale.

Frequently asked questions

What is carpet area under RERA?

Section 2(k) of the RERA Act defines it as the net usable floor area of an apartment, excluding the area covered by external walls, service shafts, exclusive balcony or verandah and exclusive open terrace, but including the area covered by internal partition walls.

What is the difference between carpet area, built-up area and super built-up area?

Carpet area is the usable floor inside the external walls. Built-up area usually adds the external walls and balcony. Super built-up adds a share of lobbies, stairs, lifts and other common areas. Only carpet area has a statutory definition under RERA.

How do I convert sq ft to sq yards (gaj)?

Divide by 9. A 1,500 sq ft plot (30 x 50 ft) is 166.67 sq yd. To get square metres, multiply sq ft by 0.0929.

How do I calculate the price of a flat per square foot?

Multiply the carpet area by the rate. A 572 sq ft carpet area at ₹8,500 per sq ft is ₹48.62 lakh. Stamp duty, registration, GST on under-construction flats and parking are extra.

Can a builder sell a flat on super built-up area?

For RERA-registered projects, promoters must disclose the carpet area of each apartment. Ask for the price per sq ft of carpet area in writing and compare the carpet area with your own measurement.

Is there an in-depth guide to the Square Footage Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.