South Africa version. Metric volumes in m³ for strip foundations, surface beds and driveways, ready-mix ordered by the cubic metre, prices in rand and the strength classes SA cement brands give. US version

Concrete Calculator (South Africa)

Cubic metres of concrete for strip foundations, surface beds and driveways, with extra for waste, the ready-mix order and the cost in rand per m³.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Concrete Calculator?

Concrete in South Africa is either delivered as ready-mix by the cubic metre or mixed on site from 50 kg bags of cement with sand and stone. Both start from the volume, which this version works out in m³ from metres and millimetres. AfriSam runs 6 m³ and 8 m³ ready-mix trucks, so the volume also tells you whether a job is a full load, part of one, or small enough to mix by hand.

Foundations are the usual first job. PPC's guide to laying a foundation sets out a 600 mm wide, 200 mm deep strip, using 50 kg bags of 42.5N cement, clean concrete sand and 19 mm stone. For a strip, enter it as a slab: the total length of the trenches, the width and the depth. The real size of your foundation comes from your approved plans and the soil, not from a calculator.

Strength is chosen by use. AfriSam's StarBuild brochure groups its suggested mixes into low strength (15 MPa) for foundations and footings, medium strength (25 MPa) for floors, patios and footpaths, and high strength (30 MPa) for driveways and carports. Mix proportions are printed on each brand's cement bag; follow those for the strength you need.

  • Six pour shapes: slab, footing, round column or hole, wall, curb and gutter, and steps with an optional landing
  • Imperial and metric inputs that convert in place when you switch
  • Bag counts for 40, 50, 60 and 80 lb and 20 or 25 kg bags from published yields
  • Ready-mix order rounded to an editable increment, plus cost for bags and ready-mix
  • Formula panel, copy and share link; runs entirely in the browser
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Concrete Calculator

  1. Keep units on metric and choose "Slab / patio / driveway".
  2. For strip foundations, add up the lengths of all the trenches, then enter the width and depth from your plans (for example 0.6 m wide and 200 mm deep).
  3. Add 5 to 10% extra for trench sides that are not straight and spillage.
  4. Set ready-mix to be sold by the cubic metre and enter your supplier's price per m³ in rand.
  5. If you are mixing on site, order cement, sand and stone from the proportions on the cement bag for the strength you need.

Worked examples

Strip foundations for a small house

Input

28 m of trench in total, 0.6 m wide, 200 mm deep, 5% extra

Output

3.36 m³ net; 3.53 m³ with the extra; ready-mix order of 4 m³ when rounded up to the half cubic metre

This fits on one 6 m³ truck. Pour the whole foundation in one day, as PPC's guide advises, and place the concrete within the time the cement brand allows after mixing (AfriSam says within two hours, preferably one).

Patio surface bed

Input

4 x 3 m, 100 mm thick, 5% extra; 25 kg premix bags for comparison

Output

1.26 m³; 108 bags of 25 kg premix

At this size, a part load of ready-mix or a site mix from 50 kg cement bags is far less work than 108 premix bags. AfriSam puts floors and patios in its medium strength (25 MPa) group.

Driveway strip for one car

Input

6 x 3 m, 125 mm thick, 5% extra

Output

2.25 m³ net, 2.36 m³ with the extra; order 2.5 m³

Driveways and carports fall in AfriSam's high strength (30 MPa) group, so ask the supplier for a 30 MPa mix. The 0.5 m³ rounding is set in the ready-mix panel; change it to your supplier's increment.

Background and insight

Bag counts use published yields rather than weight. The QUIKRETE Concrete Mix data sheet lists about 0.30 cubic feet for a 40 lb bag, 0.45 for 60 lb and 0.60 for 80 lb, and Sakrete gives the same 0.6 cubic feet for its 80 lb bag. Those yields are for mixed concrete, so a cubic yard (27 cubic feet) takes 45 bags of 80 lb or 60 bags of 60 lb. Kilogram bags sold outside the US are scaled from the 80 lb figure by weight, roughly 11.7 litres per 25 kg bag; the yield printed on your bag wins if it differs.

Ready-mix plants batch by the cubic yard or cubic metre and many dispatch in quarter-yard steps, so the calculator rounds up to an increment you can change. Small loads often carry a short-load fee, which is why a 1.4 yard patio can cost nearly as much as a 3 yard one. Normal-weight concrete weighs about 150 lb per cubic foot (2,400 kg per cubic metre), which matters if you are hauling bags in a car or checking a trailer limit.

Common use cases

  • Patios, sheds and hot-tub pads

    Size a slab and see whether 60-odd bags or one short ready-mix load makes more sense for the job.

  • Fence and deck posts

    Multiply one hole by the number of posts to buy the right pallet quantity in one trip.

  • Footings and piers

    Price square pads and round sonotube piers for a deck or small extension before calling the plant.

  • Curbs, edging and steps

    Handle the awkward L-shaped curb and gutter section and stacked steps without sketching volumes by hand.

Tips and limitations

  • Compact the bottom of the trench and wet it before pouring, so the ground does not draw water out of the mix.
  • Keep concrete moist and covered with plastic, damp sand or hessian for at least 7 days, as AfriSam advises.
  • Use cement within three months of buying it and store bags off the ground under cover.
  • Compact the base of a surface bed before pouring, and tamp the concrete into the corners to remove air pockets, as PPC's guide shows for foundations.

Sources and further reading

  1. How to lay a concrete foundation, PPC. Example 600 x 200 mm strip, 50 kg SUREBUILD 42.5N cement, 19 mm stone, place within 1 hour, pour in one day.
  2. StarBuild cement brochure, AfriSam. Low (15 MPa), medium (25 MPa) and high (30 MPa) strength uses; curing for 7 days; use within 2 hours.
  3. Readymix FAQ, AfriSam. 6 m³ and 8 m³ trucks.

Frequently asked questions

How many cubic metres of concrete for a strip foundation?

Multiply the total trench length by the width and depth in metres. A 28 m strip, 0.6 m wide and 0.2 m deep, is 3.36 m³, or about 3.53 m³ with 5% extra. Check the width and depth on your approved plans.

How big is a ready-mix truck in South Africa?

AfriSam says its trucks carry 6 m³ or 8 m³. Ask your supplier whether it delivers smaller part loads and what it charges for them.

What strength concrete do I need for a slab or driveway?

AfriSam's StarBuild guidance suggests 15 MPa for foundations and footings, 25 MPa for floors, patios and footpaths, and 30 MPa for driveways and carports. Structural slabs and anything an engineer designed follow the strength on the drawings.

Can I use the mix ratios in the site-mix panel?

The site-mix panel uses nominal volume ratios labelled with Indian M grades, which South African practice does not use. Follow the mix table on your cement bag for the MPa you need, and use the volume from this calculator to scale it.

Should I use 32.5 or 42.5 cement?

Both strength classes are sold for general building. PPC's foundation guide uses SUREBUILD 42.5N; follow the mix proportions printed on whichever bag you buy, and do not mix one bag's recipe with another cement.

How long do I have to place concrete after mixing?

PPC's foundation guide says within 1 hour, and AfriSam says within 2 hours, preferably within 1. Mix in batches you can place in that time.

Is there an in-depth guide to the Concrete Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.