South Africa version. Costs in rand from your c/kWh rate, 230 V appliances, and Eskom's Homelight and Homepower prices from 1 April 2026 as reference rates for prepaid and post-paid homes. US version

Electricity Cost Calculator (South Africa)

What a geyser, heater or kettle costs to run in rand from its watts and your Eskom or municipal c/kWh rate, with Homelight and Homepower prices.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Electricity Cost Calculator?

South African households buy electricity either directly from Eskom or from their municipality, often through a prepaid meter. Either way, the cost of running an appliance is its kilowatt-hours multiplied by the price of a unit (one kWh). This calculator does that sum in rand: enter the wattage from the rating plate, the hours it runs and your price per kWh, written in rand (343.61 c/kWh is 3.4361).

Eskom's own residential tariffs show why the rate you enter matters. From 1 April 2026, Homelight 20A costs 270.30 c/kWh and Homelight 60A 343.61 c/kWh, both including VAT, with no fixed daily charge, so every unit costs the same. Homepower is built differently: energy, network demand and ancillary charges add up to 355.56 c/kWh including VAT, and fixed daily charges are paid on top whether or not you use power. Under the Homepower purchase options Eskom is introducing, the first purchase of the month settles the fixed charges and the rest buys units.

Municipal customers pay their council's own tariff. Eskom's tariffs for municipalities change on 1 July rather than 1 April (by 9.01% from 1 July 2026), but each council sets its own household prices. Take the c/kWh figure from your latest prepaid slip or bill.

  • Watts or amps x volts input, with quantity and standby draw
  • Cost and kWh per hour, day, month and year
  • Days-per-week setting for weekday or weekend use
  • Typical appliance presets labelled as typical, with a comparison table at your price
  • Any currency symbol; copy and share results
Read the guide: Roof Pitch, Stair Layout, AC Sizing and Running Costs Explained

Updated

How to use the Electricity Cost Calculator

  1. Read the wattage from the appliance's rating plate; an element rated 3 kW is 3 000 W.
  2. Enter the hours it actually draws power each day. A geyser element switches off when the water is hot, so use the hours the element is on, not the hours the geyser is switched on.
  3. Enter your price per kWh in rand: divide c/kWh by 100.
  4. Leave fixed daily charges out; they do not change with how long an appliance runs.
  5. Check the monthly figure against your units: kWh per month is what a prepaid token buys.

Worked examples

Geyser element on Homelight 60A

Input

3 000 W element, 2 hours of heating a day, every day, 3.4361 R/kWh (Homelight 60A, VAT included, from 1 April 2026)

Output

6 kWh a day; R 20,62 a day, R 627,09 a month and R 7 525,06 a year

That is 182.5 kWh a month from your prepaid units for the geyser alone. Every hour of element time you save, with a timer or a lower thermostat setting, saves 3 kWh.

The same geyser on Homelight 20A or Homepower

Input

3 000 W, 2 h a day, at 2.7030 R/kWh (Homelight 20A) and 3.5556 R/kWh (Homepower energy-related charges)

Output

R 493,30 a month on Homelight 20A; R 648,90 a month on Homepower, before its fixed daily charges

Homelight 20A is the cheaper unit price but Eskom describes it as a 20 A supply for low-consuming homes; a 3 kW element (about 13 A at 230 V) and a 2.2 kW kettle together would already draw more than 20 A. Homepower's fixed charges are extra, so compare whole monthly costs, not only the c/kWh rate.

Kettle boiled several times a day

Input

2 200 W kettle, 15 minutes of boiling a day, every day, 3.4361 R/kWh

Output

0.55 kWh a day; R 1,89 a day and about R 57,48 a month

High wattage does not mean a high bill when the running time is short. The geyser costs more than ten times as much because it runs for hours, not minutes.

Background and insight

A watt is a rate of energy use; a kilowatt-hour is 1,000 watts used for one hour. Energy = watts x hours / 1,000, and cost = kWh x price. Standby power is the small draw from chargers, set-top boxes and appliances with clocks or remote controls; at a few watts around the clock it adds up to tens of kWh a year per device.

Nameplate wattage is the most an appliance draws. Thermostat-controlled devices such as fridges, freezers, heaters and air conditioners cycle on and off, so their average draw over a day is much lower than the label. For those, measure with a plug-in energy meter or use the yearly kWh on an EnergyGuide label, and enter the average watts. Amps times volts gives apparent power; for motors and compressors the real power in watts can be noticeably lower.

Many bills add fixed daily charges, taxes and tiered or time-of-use rates. Use the energy charge per kWh for the period when the appliance runs; the fixed charges do not change with use.

Common use cases

  • Understanding a high bill

    Price the big loads (heaters, dryers, AC, EV charging) to see which one moved the bill.

  • Comparing appliances before buying

    Compare the yearly running cost of two models with different wattages to see if the efficient one pays back.

  • Home office and crypto rigs

    Work out the electricity cost of a PC, server or workshop machine running long hours.

  • Landlords and shared houses

    Split the cost of a shared appliance fairly by measured use.

Tips and limitations

  • A prepaid token buys kWh. Divide the rand amount by your c/kWh rate (in rand) to see how many units a purchase should give you, then compare with the slip.
  • If you have rooftop solar with a grid-tied inverter, Eskom requires a time-of-use tariff (Homeflex) for direct customers; price daytime use at the Homeflex rate for that period.
  • Eskom says prepaid tokens bought under its new Easy Electricity purchase options will not expire.

Sources and further reading

  1. 2026/2027 tariff increase, Eskom. 8.76% for direct customers from 1 April 2026 and 9.01% for municipal tariffs from 1 July 2026.
  2. Schedule of standard prices for Eskom tariffs, 1 April 2026 to 31 March 2027, Eskom. Homelight, Homepower, Homeflex and EasyElectricity tariff structures (sections 21 to 24).
  3. Eskom tariffs from 1 April 2026 (Excel), Eskom. Homelight non-local authority energy charges and Homepower charges, excluding and including VAT.
  4. Tariffs and charges, Eskom

Frequently asked questions

How much does a unit of electricity cost in South Africa?

It depends on who supplies you. Eskom's direct residential prices from 1 April 2026 are 270.30 c/kWh on Homelight 20A and 343.61 c/kWh on Homelight 60A, including VAT. Municipal prices differ by council and are set each July, so use the rate on your own slip or bill.

How much does it cost to run a geyser per month?

Multiply the element's kW by the hours it is actually heating and by your rate. A 3 kW element heating for two hours a day uses 182.5 kWh a month, which is R 627,09 at the Homelight 60A price. Longer showers, a higher thermostat or cold winter water raise the hours.

What is the difference between Homelight and Homepower?

Homelight has a single c/kWh charge and no fixed charge, for lower-use supplies of 20 A or 60 A. Homepower, for larger supplies, has a c/kWh charge plus fixed rand-per-day charges for network capacity, generation capacity and service and administration.

Why did my prepaid units drop at the start of the month?

If the supply has fixed charges, the first token of the month can pay them. Under the Homepower purchase options Eskom is introducing, the first purchase of the month settles the fixed charges before buying units, so it gives fewer kWh than later top-ups. Ask your municipality whether its prepaid tariff has a fixed charge.

By how much did Eskom tariffs go up in 2026?

Eskom's standard tariffs for direct customers rose by 8.76% from 1 April 2026, and its municipal tariffs rise by 9.01% from 1 July 2026, following NERSA's MYPD6 decisions. Your council decides how much of that reaches your own tariff.

Should I include the fixed daily charge?

Not in an appliance's running cost. The fixed charge is paid for the connection whether the appliance runs or not. Add it only when you estimate a whole monthly bill.

Is there an in-depth guide to the Electricity Cost Calculator?

Yes. “Roof Pitch, Stair Layout, AC Sizing and Running Costs Explained” covers the background, how it works, common pitfalls and worked examples. Read the full guide.