Workplace Risk Assessment Checklist

What could cause harm, who could be harmed, what you already do, and what else is reasonable. Plus the hierarchy of control and when to review it.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Workplace Risk Assessment Checklist?

A risk assessment is four questions, not a form: what could cause harm, who could be harmed, what you already do about it, and what else is reasonable. Writing it down is a legal requirement in most places above a certain size, and useful at any size.

The part people get wrong is the order of controls. Protective equipment is the last resort rather than the first answer, because it protects one person, only when correctly used, and it is the control most likely to fail in practice.

  • Built on the four questions rather than on a form
  • Explains the hierarchy of control and why PPE comes last
  • Names the hazards most often omitted, including lone working and stress
  • Trigger-based review, plus checking controls are actually used
  • Editable and exportable as PDF, CSV, Markdown or a Google Form
Read the guide: Why Checklists Work, and How to Use One Properly

Updated

How to use the Workplace Risk Assessment Checklist

  1. Walk round and look, ask the people doing the work, and read the accident and near-miss records.
  2. Cover the usual hazard categories deliberately, including lone working, driving and stress.
  3. Identify who specifically could be harmed, including contractors, cleaners and new or pregnant workers.
  4. Work down the hierarchy of control, treating protective equipment as the last resort.
  5. Record it plainly with owners and dates, share it with the people affected, and review on triggers.

Worked examples

A small office

Input

Identify and record sections

Output

Walk round, staff asked, display screen and fire assessments done

A template would have missed the specific hazards.

Work involving lifting

Input

Control section

Output

Hazard engineered out before reaching for equipment

PPE protects one person and fails most often.

After a near miss

Input

Review section

Output

Assessment revisited and the failed control changed

An incident is evidence a control did not work.

Background and insight

Templates find generic hazards, which is why walking round and looking comes first. The people doing the work know the shortcuts, the awkward lift and the step everyone trips on, and they are rarely asked. Accident records, near misses and sickness patterns are the other free source: repeated minor injuries are usually pointing at something.

The hazards most often left out are the less physical ones: lone working, violence or aggression from the public, driving for work, and work-related stress. All are recognised workplace risks with their own guidance.

Who could be harmed matters as much as what. New or young workers, pregnant workers, people with disabilities, contractors, cleaners, visitors and lone workers all face different exposure to the same hazard, and a single assessment that assumes one standard worker misses most of that.

The hierarchy of control is the heart of it: remove the hazard, then substitute something safer, then engineer a control, then organise the work differently, and only then rely on protective equipment and training. The legal test is what is reasonably practicable rather than eliminating all risk, which is why the assessment should record why a control was judged sufficient.

On recording, the useful format is plain: hazard, who is at risk, existing controls, further action, owner and date. An assessment listing actions nobody owns is a document rather than a change. Several specific assessments are often required separately, including fire, display screen equipment, hazardous substances, manual handling, noise and new or expectant mothers.

Reviewing is trigger-based rather than annual: new equipment, a new process, a new building, a new worker, or any incident or near miss. And checking in practice that controls are actually used matters because written controls and real behaviour diverge quietly, which only observation finds.

Common use cases

  • A first risk assessment

    The four questions, without the jargon.

  • Small businesses

    What must be written down, and the separate assessments that apply.

  • After an incident

    Revisiting the assessment and recording what changed.

  • New equipment or processes

    The triggers that mean a review rather than an annual date.

Tips and limitations

  • Ask the people doing the work what nearly goes wrong. They know and are rarely asked.
  • Repeated minor injuries are usually pointing at one underlying thing.
  • Record why a control was judged sufficient, not just what it is.
  • Give every further action an owner and a date, or nothing changes.
  • Observe whether controls are actually used. Written and real practice diverge quietly.

Sources and further reading

  1. Risk assessment, Health and Safety Executive. The four steps, recording and reviewing
  2. Hazard Identification and Assessment, Occupational Safety and Health Administration. Identifying hazards and the hierarchy of controls
  3. Employing staff for the first time, UK Government. Statutory duties including health and safety

Frequently asked questions

How do I do a risk assessment at work?

Answer four questions: what could cause harm, who could be harmed, what you already do about it, and what else is reasonably practicable. Walk round and look rather than filling in a template, ask the people doing the work, and write it down.

What is the hierarchy of control?

The order to try controls in: remove the hazard, substitute something safer, engineer a control, change how the work is organised, and only then rely on protective equipment and training. Working down it produces far more reliable protection.

Is protective equipment really the last resort?

Yes. It protects only the person wearing it, only when worn correctly, and it is the control most likely to fail in practice. It is appropriate where higher controls cannot remove the risk, not as the first answer to a hazard.

Do small businesses need written risk assessments?

Above a certain size it is a legal requirement in most jurisdictions, and it is useful below it. Several specific assessments are often required separately too, including fire, display screen equipment, hazardous substances, manual handling and noise.

When should a risk assessment be reviewed?

On triggers rather than only annually: new equipment, a new process, a new building, a new worker, or after any incident or near miss. An incident is evidence that a control did not work the way the assessment assumed it would.

Is there an in-depth guide to the Workplace Risk Assessment Checklist?

Yes. “Why Checklists Work, and How to Use One Properly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.