Australia version. Cubic metres as Australian landscape yards sell them, 20 kg and litre bags, A$ prices, and state guidance on mulch depth for water-wise gardens. US version

Mulch and Gravel Calculator (Australia)

Cubic metres of mulch, pebbles, road base or soil for garden beds, paths and slab bases, with tonnes, 20 kg or litre bag counts and a bulk price in A$.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Gravel and Mulch Calculator?

Landscape supply yards in Australia sell mulch, soil, pebbles and road base by the cubic metre, loaded onto your trailer or delivered by truck. Bagged products are 20 kg for stone and litre bags for mulch and potting mix. This version gives cubic metres first, then tonnes for heavy materials and bag counts for small jobs.

A 15 m² garden bed mulched 75 mm deep, with 5% to spare, is 1.18 m³: about 24 bags of 50 litres, or a single trailer load. Mulch depth is the main choice. Queensland Government advice is a thin layer of about 2 cm for fine mulch, kept 6 to 7 cm clear of stems; for coarse mulch, Ipswich City Council suggests at least 75 mm and Brisbane City Council at least 10 cm.

For a shed slab base, a 3.6 by 3 m pad of road base 100 mm deep with 10% for compaction needs 1.19 m³, about 1.9 tonnes, or 96 bags of 20 kg.

  • Gravel, crushed stone, sand, topsoil, mulch or a custom density
  • Cubic yards, cubic metres, short tons, tonnes and bags at once
  • Rectangle, circle, triangle or known-area input with depth in inches or centimetres
  • Bagged versus bulk cost comparison
  • Density reference table; copy and share results
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Gravel and Mulch Calculator

  1. Measure the bed or path in metres and the depth in centimetres.
  2. Choose the material; the density is a typical loose figure, so ask the yard for theirs.
  3. Pick 20 kg bags for stone or a litre size for mulch.
  4. Enter the yard's price per m³ in A$ for a bulk load.

Worked examples

Mulching a garden bed

Input

15 m², 7.5 cm deep, wood mulch, 5% extra, 50 litre bags

Output

1.18 m³; 24 bags of 50 L

Keep mulch 6 to 7 cm back from plant stems to avoid rot, as Queensland's water-wise guidance recommends.

Road base under a shed slab

Input

3.6 x 3 m, 10 cm deep, crushed rock, 10% extra, 20 kg bags

Output

1.19 m³; about 1.9 tonnes; 96 bags of 20 kg

At that weight a yard delivery is far easier than bags. Compact it in layers with a plate compactor.

Decorative pebbles

Input

10 m², 5 cm deep, gravel, 5% extra, 20 kg bags

Output

0.53 m³; about 0.87 tonnes; 44 bags of 20 kg

Close to the size where half a cubic metre from a yard costs less than 44 bags.

Background and insight

Volume is area times depth, with depth converted from inches to feet (divide by 12) or centimetres to metres. A 10 x 10 ft bed covered 3 inches deep holds 25 cubic feet, which is 0.93 cubic yards. Weight then depends on density, and loose aggregate varies more than most people expect: dry gravel and crushed stone are around 2,700 to 2,800 lb per cubic yard (1.35 to 1.4 short tons), topsoil around 2,200 lb, and wood mulch only a few hundred pounds. Wet sand and soil can be 10 to 20% heavier.

The densities in this tool are typical published values for loose, dry material and are labelled as approximate. Quarries weigh each load on a scale, so a ton of their product may be a little more or less volume than the estimate. When you buy by the ton, ask the yard for their conversion factor and enter it.

Common use cases

  • Paths and patios

    Size the base and top layer for a gravel path or a paver patio bed of sand.

  • Garden beds

    Order mulch or topsoil for new and existing beds without a second trip to the garden centre.

  • Driveways and parking pads

    Convert a driveway plan to tons of crushed stone for a quarry delivery.

  • Comparing bags and bulk

    See how many bags a job takes and whether a bulk delivery is cheaper once the fee is included.

Tips and limitations

  • Coarse mulch lets water soak through and lasts longer; fine mulch breaks down faster and can mat, so loosen it from time to time.
  • In bushfire-prone areas, keep flammable mulch away from the house walls and use gravel or pebbles close to the building.
  • Yards sell by volume, but trailers are limited by weight; a cubic metre of road base can exceed a small trailer's load rating.

Sources and further reading

  1. Waterwise gardening: mulching, Queensland Government. About 2 cm for fine mulch; keep mulch 6 to 7 cm from stems.
  2. Australian trade measurement laws, business.gov.au

Frequently asked questions

How many cubic metres of mulch do I need?

Multiply the area in m² by the depth in metres. Fifteen square metres at 75 mm is 1.125 m³, or 1.18 m³ with 5% extra.

How deep should mulch be in Australia?

Queensland Government advice is a thin layer of about 2 cm for fine mulch, kept 6 to 7 cm clear of stems; for coarse mulch, Ipswich City Council suggests at least 75 mm and Brisbane City Council at least 10 cm. Put your depth into the tool.

How many bags of mulch make a cubic metre?

A cubic metre is 1,000 litres, so 20 bags of 50 L or about 15 bags of 70 L.

How much does a cubic metre of road base weigh?

Loose crushed rock is about 1.6 tonnes per m³ at the tool's default, and more when wet or compacted. Ask your supplier for the figure for their product.

Is it cheaper to buy mulch in bulk or bags?

Above about half a cubic metre, bulk from a landscape yard is usually cheaper, even with delivery. Enter both prices in A$ to compare.

Is there an in-depth guide to the Gravel and Mulch Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.