Australia version. Shows the Bureau of Meteorology's apparent temperature (Steadman, with wind) next to the US heat index, in °C, so it matches the "feels like" figure in BoM observations. US version
Feels Like Temperature Calculator (Australia)
Work out the apparent (feels like) temperature the Bureau of Meteorology way from temperature, humidity and wind, alongside the US heat index, in °C.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Heat Index Calculator?
The "feels like" figure in Bureau of Meteorology observations is the apparent temperature, based on Steadman's model of an adult walking outdoors in the shade. It combines air temperature, humidity and wind. This tool uses Steadman's non-radiation formula, AT = Ta + 0.33e − 0.70ws − 4.00, where e is the water vapour pressure in hPa and ws the wind speed in m/s at 10 metres.
Because it includes wind, the BoM figure is often well below the US heat index, which assumes a light breeze. On a humid 32°C Sydney afternoon at 70% humidity with a 15 km/h breeze, the apparent temperature is 36°C, while the US heat index is 40°C.
Neither number is a heatwave warning. The Bureau's heatwave service rates heatwaves by comparing the coming days' temperatures with the local climate, so check its warnings as well.
- Exact NWS Weather Prediction Center algorithm with both adjustments
- Relative humidity or dew point input, °F or °C
- Dew point output using the Magnus formula
- NWS Caution, Extreme Caution, Danger and Extreme Danger bands, or the PAGASA (Philippines) heat index categories
- Humidity table at your temperature
- Step-by-step working, shareable link and copy-ready summary
Updated
How to use the Heat Index Calculator
- Choose °F or °C. Switching converts the numbers already entered.
- Enter the air temperature, measured in the shade as weather stations do.
- Choose whether you have relative humidity or dew point, and enter it.
- Read the heat index, its NWS category and the effects described for that band.
- Check the dew point and the humidity table, and open How this was calculated to see the formula used.
Worked examples
Humid summer afternoon in Sydney
Input
32°C, 70% relative humidity, wind 15 km/h
Output
Apparent temperature 36.0°C; US heat index 40.4°C
Vapour pressure is 33.2 hPa, so AT = 32 + 0.33 × 33.2 − 0.70 × 4.2 − 4.00. The breeze takes about 3°C off.
Dry northerly in Adelaide
Input
42°C, 15% relative humidity, wind 30 km/h, then calm
Output
Apparent temperature 36.2°C with wind, 42.0°C in calm air
In dry heat the low vapour pressure keeps AT below the air temperature when it is windy. Hot wind still dries you out quickly, so the lower number is not a reason to skip water and shade.
Darwin build-up
Input
33°C, 70% relative humidity, wind 10 km/h
Output
Apparent temperature 38.6°C; US heat index 43.5°C
High humidity raises both measures above the air temperature.
Background and insight
The heat index comes from Robert Steadman's 1979 model of how the body exchanges heat with its surroundings. The National Weather Service computes it with a regression fitted to Steadman's tables by Lans Rothfusz in 1990. The NWS Weather Prediction Center describes the procedure: first compute a simple formula, HI = 0.5 x (T + 61 + (T - 68) x 1.2 + RH x 0.094). If that result averaged with the temperature is below 80°F, use it. Otherwise apply the full nine-term Rothfusz regression, then subtract an adjustment when humidity is below 13% at 80 to 112°F, or add one when humidity is above 85% at 80 to 87°F.
The NWS groups heat index values into four categories: Caution at 80 to 90°F, Extreme Caution at 90 to 103°F, Danger at 103 to 124°F and Extreme Danger at 125°F or more. The values assume shade and a light breeze. The NWS notes that direct sunshine can raise the heat index by up to 15°F, and people doing hard physical work, older adults, young children and those on some medications are at risk at lower values.
Dew point is calculated with the Magnus formula using the Alduchov and Eskridge (1996) constants a = 17.625 and b = 243.04°C, accurate to a small fraction of a degree across everyday temperatures. The same formula runs backwards when you enter a dew point, to recover relative humidity.
Common use cases
Planning outdoor work
Decide when to schedule breaks, shade and water for crews, events or sports practice.
Exercise and races
Judge whether to slow down, move a run to the morning or take extra fluids.
Reading forecasts
Turn a forecast temperature and dew point into the number that matters for comfort and safety.
Home weather stations
Check the heat index your station reports against the NWS method.
Teaching meteorology
Show students how humidity changes perceived temperature and how the NWS formula works.
Tips and limitations
- Use the wind speed from the BoM observation for your nearest station; it is measured at 10 m.
- Direct sun can add about 8°C to the apparent temperature at midday, according to the Bureau.
Sources and further reading
- Apparent ("feels like") temperature, Bureau of Meteorology. Steadman model in the shade; midday sun adds about 8°C.
- Thermal comfort observations, Bureau of Meteorology. Thermal comfort and apparent temperature in BoM observations.
- Heatstroke, healthdirect (Australian Government). Heatstroke is a medical emergency: call triple zero (000) and ask for an ambulance; signs include confusion, dizziness, seizures and no or reduced sweating.
Frequently asked questions
How does the Bureau of Meteorology calculate "feels like"?
The Bureau uses Steadman's apparent temperature, a model of an adult walking outdoors in the shade. This tool uses Steadman's non-radiation formula, AT = Ta + 0.33e − 0.70ws − 4.00, with air temperature in °C, water vapour pressure in hPa and the 10 m wind speed in m/s, and computes the vapour pressure from temperature and relative humidity.
Why is the BoM feels like lower than the heat index on US websites?
The US heat index ignores wind and is tuned to US summer conditions. The BoM formula subtracts 0.7°C for every metre per second of wind, so a breeze lowers it.
Does the feels like temperature include the sun?
No. Both measures are for the shade. The Bureau notes that midday sun in Australia can raise the apparent temperature by about 8°C.
Is the apparent temperature the same as a heatwave warning?
No. Heatwave warnings come from the Bureau's heatwave service, which looks at how hot the coming days are compared with the local climate. A high apparent temperature on one afternoon is not a heatwave by itself.
When is heat an emergency?
Heatstroke is a medical emergency. If someone shows signs of heatstroke, such as confusion, dizziness, seizures, poor coordination or reduced sweating with red, hot or dry skin, call triple zero (000) and ask for an ambulance.
What wind speed should I enter?
The wind speed in km/h from the BoM observation or forecast. The tool converts it to m/s. Enter 0 for still air indoors or in a sheltered spot.
Is there an in-depth guide to the Heat Index Calculator?
Yes. “Heat Index and Wind Chill: How Feels-Like Temperatures Work” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.