Australia version. Metric throughout: litres, doses per 10,000 L, salt in 20 kg bags for a salt chlorinator, and NSW Health figures on stabiliser and chlorine. US version
Pool Volume Calculator (Litres)
How many litres your backyard pool holds, with liquid chlorine or granular doses per 10,000 L, salt in 20 kg bags for the chlorinator, and stabiliser build-up.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Pool Volume Calculator?
Australian pool shops dose by the litre: a bottle of liquid chlorine or a bag of granular is labelled per 10,000 L, and salt chlorinators, common on Australian backyard pools, are topped up from 20 kg bags. This version works in metres and litres. A typical 8 x 4 m pool running from 1.0 m at the shallow end to 1.8 m at the deep end holds 44,800 L.
Enter the shape and water depths, choose the product and the rise in free chlorine you want, and the tool gives the dose, the side effects on stabiliser or calcium hardness, the salt to reach your chlorinator's level, and the fill time. Pool fencing is regulated separately by each state, and in NSW pools must be registered.
- Rectangle, round, ellipse, straight-sided oval, kidney and free-form shapes
- Sloping floors from shallow and deep depths
- US gallons, litres, cubic metres and imperial gallons at once
- Chlorine dose for liquid, bleach, cal-hypo, dichlor and trichlor, with CYA and calcium side effects
- Salt dose and fill time; everything runs in the browser
Updated
How to use the Pool Volume Calculator
- Pick the shape and enter the length and width in metres; for a freeform pool, enter the water surface area from the builder's plans.
- Enter the water depth at the shallow and deep ends.
- Choose the product: liquid chlorine (sodium hypochlorite, 10 to 12.5%), granular calcium hypochlorite (65 to 73%), stabilised dichlor or trichlor.
- Set how far to raise free chlorine. The hint shows the dose per 10,000 L for the chosen product.
- For a salt pool, enter the salt reading, the level printed on your chlorinator and 20 kg for the bag size.
Worked examples
8 x 4 m pool, 1.0 to 1.8 m deep
Input
Rectangle 8 x 4 m, 1.0 and 1.8 m, raise by 2 ppm with 12.5% liquid chlorine
Output
44,800 L; 0.72 L of liquid chlorine
Liquid chlorine at 12.5% needs 80 mL per 10,000 L for each 1 ppm. It adds no stabiliser or calcium, which is why it is the usual way to correct a salt pool that has dropped.
Filling the same pool with salt
Input
44,800 L, salt 0 to 4,000 ppm, 20 kg bags
Output
179.2 kg of salt, nine 20 kg bags
Use the level on your own chlorinator; this example assumes 4,000 ppm. Rain and backwashing dilute salt, so top up from a test result, not by habit.
Trichlor tablets in the same pool
Input
44,800 L, raise by 2 ppm with trichlor 90%
Output
100 g of trichlor; adds 1.2 ppm of stabiliser (cyanuric acid)
NSW Health guidance for public pools puts the optimum stabiliser at 30 mg/L and the maximum at 50 mg/L. A pool fed only on tablets can pass that over a summer.
Background and insight
Volume is surface area times average depth. For a pool whose floor slopes evenly from the shallow end to the deep end, the average depth is the mean of the two. Hopper-bottom pools with a steep drop into a small deep area hold less than that average suggests, so treat the result as an upper bound for them. One cubic foot holds 7.4805 US gallons and one cubic metre is 1,000 litres.
Ovals come in two kinds. A true ellipse has area pi / 4 x length x width, which is where the trade shortcut of length x width x depth x 5.9 gallons comes from. Many above-ground "oval" pools are really straight-sided with round ends, which hold more; choose that shape for them. Kidney pools use the trade rule of thumb 0.45 x (width at one end + width at the other) x length, which is an approximation.
Chlorine dose is chemistry, not a chart. One part per million is one milligram per litre, so raising 10,000 US gallons (37,854 litres) by 1 ppm takes 37.9 grams of available chlorine. Liquid chlorine sold at 12.5 trade percent holds 125 grams of available chlorine per litre, which works out to about 10.2 fluid ounces. Cal-hypo at 65% needs about 2 ounces by weight. The side effects follow molar ratios: every 1 ppm of chlorine from trichlor adds about 0.6 ppm of cyanuric acid, from dichlor about 0.9 ppm, and from cal-hypo about 0.7 ppm of calcium hardness.
Common use cases
Opening and shocking
Dose chlorine by the ppm you need instead of by a bottle label written for a different pool size.
Salt cell start-up
Work out how many bags of salt bring the water to the chlorinator range.
Buying a pump or heater
Pumps are sized by turnover time and heaters by volume, so both start from gallons.
Filling or topping up
Estimate how long the hose needs to run and what the water bill will cover.
Tips and limitations
- In NSW a pool fence must be at least 1.2 m high from finished ground level with no more than 10 cm under it, and the pool must be on the NSW Swimming Pool Register; other states have their own rules.
- When stabiliser is high, switch to liquid chlorine or calcium hypochlorite until dilution brings it down.
- Store chlorine and acid apart and add chemicals to water, never water to chemicals.
Sources and further reading
- Stabiliser (cyanurate) use in outdoor swimming pools, NSW Health. Optimum and maximum cyanuric acid and the higher free chlorine needed with it.
- Owning a pool or spa: your obligations, NSW Government. Pool barriers, AS 1926.1 and the Swimming Pool Register.
- Public swimming pool and spa pool advisory document, NSW Health
Frequently asked questions
How many litres is my pool?
Litres = surface area in m² x average depth in m x 1,000. An 8 x 4 m pool from 1.0 to 1.8 m deep is 32 m² x 1.4 m x 1,000 = 44,800 L. A 10 x 4 m pool to the same depths is 56,000 L.
How much liquid chlorine per 10,000 litres?
To raise free chlorine by 1 ppm, about 80 mL of 12.5% liquid chlorine or 100 mL of 10%. Granular calcium hypochlorite at 65% takes about 15 g, and stabilised dichlor at 56% about 18 g.
How many bags of salt do I need for my pool?
Salt (kg) = (target ppm minus current ppm) x litres / 1,000,000, then divide by 20 for 20 kg bags. Raising a 44,800 L pool from 2,000 to 4,000 ppm needs 89.6 kg, which is five bags.
What level should stabiliser be in a pool?
NSW Health's fact sheet on public outdoor pools gives 30 mg/L as optimal and 50 mg/L as the maximum, and says pools using stabiliser need at least 3 mg/L of free chlorine. Home pools are not covered by that regulation, but the same chemistry applies.
Do I need to register my pool?
In NSW, yes: pools and spas must be entered on the NSW Swimming Pool Register, and a compliance certificate is needed before selling or leasing a property with a pool. Other states set their own rules; Queensland and Victoria, for example, also keep pool registers.
How long does it take to fill a pool with a hose?
Divide the litres by your hose flow. At 15 L/min, 44,800 L takes about 50 hours, which is why a water carter delivery is often used for a new pool's first fill.
Is there an in-depth guide to the Pool Volume Calculator?
Yes. “Pool Volume and Chlorine Dosing: Gallons, ppm and Salt” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.