Australia version. Set up for Australian rooftops: the STC discount as a rebate, self-consumption at your usage rate, exports at your feed-in tariff, and A$. US version
Solar Panel Payback Calculator (Australia)
Rooftop solar payback in Australia after small-scale technology certificates (STCs), with self-use at your tariff and exports at your feed-in tariff, in A$.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Solar Payback Calculator?
Most Australian solar quotes already take off the value of small-scale technology certificates (STCs) created under the Small-scale Renewable Energy Scheme. The number of STCs is the system size times your postcode zone rating times the deeming period, which the Clean Energy Regulator sets at five years for systems installed in 2026 and four years in 2027, so the discount shrinks each January.
Payback depends mostly on how much of the output you use yourself. Every kWh you use saves your full usage rate, often 30 cents or more, while exports earn a feed-in tariff of a few cents. A household home during the day, or one that runs the pool pump, hot water or EV charging off the panels, can double its savings.
Enter the quote before STCs as the total, the STC discount as a rebate, and your own usage rate and feed-in tariff.
- Payback year, lifetime savings, net gain and ROI
- NPV, IRR and cost per kWh produced
- Self-use and export valued separately for net billing
- Degradation, price escalation, upkeep and inverter replacement
- Year-by-year table, any currency (rand and peso amounts formatted the local way), shareable link
Updated
How to use the Solar Payback Calculator
- Enter the system size in kW DC and the yearly production per kW for your site (from PVWatts or your quote).
- Enter the installed price per watt, or switch to the total quote, plus any tax credit percentage and fixed rebates.
- Enter the price you pay per kWh, the share of solar you expect to use at home, and the credit for exported power.
- Adjust the price rise, degradation, upkeep, inverter replacement, analysis period and discount rate if needed.
- Read the payback, net gain, ROI, NPV, IRR and cost per kWh, and check the year-by-year table.
Worked examples
6.6 kW system in Sydney (zone 3), five-year deeming period
Input
45 STCs (6.6 × 1.382 × 5, rounded down) at an assumed $38 = $1,710 off an $8,710 price; 1,400 kWh per kW; 35% used at 33 cents, the rest exported at 5 cents
Output
Net $7,000; first-year saving $1,368; payback 5.0 years
The system makes 9,240 kWh. 3,234 kWh used at home saves $1,067 and 6,006 kWh exported earns $300.
Same system with 60% self-use
Input
Running the hot water, pool pump or EV charging in the daytime
Output
First-year saving $2,014; payback 3.4 years
Moving 25% more of the output into your own use adds $646 a year, more than any change in feed-in tariff would.
Background and insight
Production is system size times specific yield, the kWh one kW of panels makes in a year at your site. It depends on latitude, roof direction, tilt and shading, so use the free PVWatts calculator from the National Laboratory of the Rockies (formerly NREL) for your address. Output then declines each year; a 2013 NREL review of field data (Jordan and Kurtz) put the median degradation of crystalline silicon panels at about 0.5% a year, the default here.
Savings depend on what each kWh is worth. Solar used in the home avoids buying a kWh at the retail price. Exported solar earns whatever the utility credits: the retail price under classic net metering, or a lower avoided-cost or export rate under net billing schemes such as California's. The calculator splits production by your self-use percentage and values each part separately, then grows both values by the price escalation rate. The default retail price is the EIA's October 2026 forecast of about 18 cents per kWh for US residential customers in 2026.
Payback is the year the cumulative cash flow, starting from the net cost, turns positive, interpolated within the year. ROI is the net gain divided by the net cost. NPV discounts each year's cash flow at your discount rate, and IRR is the rate at which NPV is zero, comparable with other investments. The cost per kWh is the net cost plus upkeep divided by lifetime production, undiscounted. In the US, the section 25D residential clean energy credit ended for expenditures after 31 December 2025 under the One Big Beautiful Bill Act, so the credit field defaults to 0%.
Common use cases
Checking an installer quote
Put the quoted price and production in and see if the promised payback holds with realistic export rates.
Comparing quotes
Compare systems of different sizes and prices on payback, IRR and cost per kWh.
Deciding after incentives changed
See how solar looks without the federal credit and with local rebates only.
Sizing for self-use
Test whether a smaller system with higher self-use pays back faster under net billing.
Tips and limitations
- Check your postcode's zone rating with the Clean Energy Regulator's postcode tool and confirm the STC count on your quote.
- Use the output estimate from your installer for your roof direction and shading; the 1,400 kWh per kW default is an assumption.
- Feed-in tariffs differ between retailers and states and are often far below usage rates, so self-use is worth more than export.
Sources and further reading
- Deeming period decline, Clean Energy Regulator. Five years for 2026 installations, four years for 2027.
- Small-scale technology certificates, Clean Energy Regulator. What STCs are and what sets their number.
Frequently asked questions
How are STCs calculated for solar panels?
System size in kW × the zone rating for your postcode × the deeming period in years, rounded down. The Clean Energy Regulator's deeming period is five years for systems installed in 2026 and four in 2027, falling to the scheme's end in 2030.
How long does solar take to pay back in Australia?
In the 6.6 kW example, 5.0 years at 35% self-use and 3.4 years at 60%, at 33 cents usage and a 5 cent feed-in tariff. Lower usage rates or a shaded roof make it longer.
Is a feed-in tariff worth chasing?
Less than self-use. At 5 cents per kWh, exporting 6,006 kWh earns $300 a year, while using 1,000 kWh more at home instead of exporting it saves $330 on your bill for $50 of feed-in credit given up.
Should I add a battery?
A battery raises self-use but adds cost; model it by raising the self-use share and the price. The tool does not include battery degradation or battery STCs.
What yearly output should I enter per kW?
Use your installer's estimate divided by the system size. Output varies by city, orientation and shading, so the default 1,400 kWh per kW is only a starting point.
Is there an in-depth guide to the Solar Payback Calculator?
Yes. “Solar Panel Payback Period: How to Work It Out Honestly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.