Canada version. Feet and inches in, cubic yards for landscape yards and metric tonnes for quarries out, prices in CA$, and FireSmart guidance on mulch near the house. US version
Gravel and Mulch Calculator (Canada)
Cubic yards, cubic metres and tonnes of gravel, crushed stone, soil or mulch for beds and driveways, with bag counts, CA$ prices and FireSmart advice on mulch.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Gravel and Mulch Calculator?
Landscape suppliers in Canada usually sell soil, mulch and decorative stone by the cubic yard, while quarries and aggregate yards price crushed stone and gravel by the metric tonne. This version takes your measurements in feet and inches and gives both, so you can compare quotes.
A 60 by 10 ft driveway topped up 4 in deep with crushed stone needs 7.78 yd³, which is about 9.5 tonnes at a typical loose density. Switch "Bulk priced per" to tonne to price it the way the quarry does.
In wildfire country, what you spread next to the house matters. FireSmart BC says bark, evergreen needles and other plant-based mulches should not be used next to buildings, and recommends gravel or rock mulch in the 1.5 m non-combustible zone around the home.
- Gravel, crushed stone, sand, topsoil, mulch or a custom density
- Cubic yards, cubic metres, short tons, tonnes and bags at once
- Rectangle, circle, triangle or known-area input with depth in inches or centimetres
- Bagged versus bulk cost comparison
- Density reference table; copy and share results
Updated
How to use the Gravel and Mulch Calculator
- Enter the area in feet, or the square footage if you know it, and the depth in inches.
- Pick the material; ask the yard for its density if you are buying by weight.
- Choose a bag size for small jobs: 2 cu ft for mulch, 0.5 cu ft for gravel.
- Set the bulk price per cubic yard or per tonne, as quoted.
Worked examples
Mulching flower beds
Input
200 sq ft of beds, 3 in deep, wood mulch, 5% extra, 2 cu ft bags
Output
1.94 yd³; 27 bags of 2 cu ft
At about two yards, bulk delivery from a landscape yard usually beats 27 bags, but check the delivery fee.
FireSmart gravel strip around a house
Input
600 sq ft (a 5 ft strip around a 120 ft perimeter), 3 in deep, gravel, 5% extra
Output
5.83 yd³; about 7.41 tonnes
Clearing the immediate zone and covering it with stone follows FireSmart advice for homes near forest or grassland.
Topping a gravel driveway
Input
60 x 10 ft, 4 in deep, crushed stone, 5% extra, priced per tonne
Output
7.78 yd³; 9.53 tonnes
Quarries weigh the truck, so order by tonnes and confirm the density for the product, which changes with size and moisture.
Background and insight
Volume is area times depth, with depth converted from inches to feet (divide by 12) or centimetres to metres. A 10 x 10 ft bed covered 3 inches deep holds 25 cubic feet, which is 0.93 cubic yards. Weight then depends on density, and loose aggregate varies more than most people expect: dry gravel and crushed stone are around 2,700 to 2,800 lb per cubic yard (1.35 to 1.4 short tons), topsoil around 2,200 lb, and wood mulch only a few hundred pounds. Wet sand and soil can be 10 to 20% heavier.
The densities in this tool are typical published values for loose, dry material and are labelled as approximate. Quarries weigh each load on a scale, so a ton of their product may be a little more or less volume than the estimate. When you buy by the ton, ask the yard for their conversion factor and enter it.
Common use cases
Paths and patios
Size the base and top layer for a gravel path or a paver patio bed of sand.
Garden beds
Order mulch or topsoil for new and existing beds without a second trip to the garden centre.
Driveways and parking pads
Convert a driveway plan to tons of crushed stone for a quarry delivery.
Comparing bags and bulk
See how many bags a job takes and whether a bulk delivery is cheaper once the fee is included.
Tips and limitations
- Keep mulch a few centimetres away from tree trunks and stems to avoid rot.
- Ask whether a bulk quote includes delivery; many yards add a flat fee per load, which changes the bag-versus-bulk answer for small jobs.
- Spread gravel over landscape fabric on paths to slow weeds.
Sources and further reading
- FireSmart landscaping guide, Government of Manitoba. Non-combustible materials such as gravel in the zone next to the home.
- Landscaping tips, FireSmart BC. No bark, evergreen needles or other plant-based mulch next to buildings; gravel or rock mulch in the 1.5 m non-combustible zone.
- Weights and Measures Act, Justice Laws Website, Government of Canada
Frequently asked questions
Is gravel sold by the yard or by the tonne in Canada?
Both. Landscape supply yards often quote by the cubic yard, while quarries and aggregate pits sell by the metric tonne off a scale. The calculator gives yards, cubic metres and tonnes so you can compare.
Should I use bark mulch next to my house?
In areas at risk of wildfire, no. FireSmart BC says bark, evergreen needles and other plant-based mulches should not be used next to buildings, and recommends gravel or rock mulch in the 1.5 m non-combustible zone around the home.
How many tonnes of gravel do I need for a driveway?
Multiply length by width by depth to get cubic yards, then multiply by the density. A 60 x 10 ft driveway topped 4 in deep is 7.78 yd³ with 5% extra, about 9.5 tonnes of crushed stone.
How many bags of mulch make a cubic yard?
A cubic yard is 27 cu ft, so 13.5 bags of 2 cu ft. Two hundred square feet at 3 in deep needs about 27 bags.
What is a tonne compared with a ton?
A metric tonne is 1,000 kg (2,204.6 lb). A US short ton is 2,000 lb. Canadian quarries use the metric tonne, so the tonnes figure is the one to compare with a quote.
Is there an in-depth guide to the Gravel and Mulch Calculator?
Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.