Interval Timer
A free HIIT and Tabata timer with work, rest, rounds, sets and sound cues. It keeps accurate time in a background tab and keeps your screen awake while it runs.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Interval Timer?
The Interval Timer runs work and rest intervals for HIIT, Tabata and EMOM workouts. Pick a preset or set the get-ready countdown, work, rest, rounds, sets and the rest between sets, press Start, and it counts down each interval with a large clock, the round and set you are on, and what comes next.
Three short beeps warn you before each interval ends, a high tone starts each work interval and a low tone starts each rest. The timer reads the clock instead of counting ticks, so it stays on time when you switch apps or the tab goes to the background, and it asks the browser to keep the screen awake while it runs. Nothing is sent anywhere.
- Work, rest, rounds, sets and rest between sets
- Tabata, HIIT and EMOM presets
- Countdown beeps and start tones via Web Audio
- Accurate in background tabs (timestamp-based)
- Screen wake lock while running
- Total and work time before you start
Updated
How to use the Interval Timer
- Pick a preset (Tabata 20/10 x 8, HIIT 40/20, HIIT 30/30 or EMOM 10 min) or choose Custom.
- Adjust get ready, work, rest, rounds per set, sets and rest between sets, in seconds. The total time and work time update as you type.
- Press Start. Tap Sound to turn the beeps off or on.
- Use Pause, Skip to jump to the next interval, or Reset to change the settings.
- Keep the page open; the screen stays awake where the browser supports it.
Worked examples
Classic Tabata
Input
10 s get ready, 20 s work, 10 s rest, 8 rounds, 1 set
Output
Total 4:00 (3:50 after the countdown), 2:40 of work
Seven rests, not eight: the workout ends on the last work interval.
Three sets of 40/20
Input
10 s get ready, 40 s work, 20 s rest, 8 rounds, 3 sets, 60 s between sets
Output
Total 25:10, 16:00 of work, work to rest 2 : 1
The minute between sets replaces the last 20 s rest of each set.
EMOM
Input
60 s work, 0 s rest, 10 rounds
Output
A beep every minute for 10 minutes
Do the reps at the start of each minute and rest for whatever is left of it.
Background and insight
The Tabata preset follows the protocol in Tabata and colleagues (1996): seven to eight bouts of 20 seconds at about 170% of VO2max on a cycle ergometer with 10 seconds of rest between them, done 5 days a week for 6 weeks by seven subjects, which raised anaerobic capacity by 28% and VO2max by 7 mL/kg/min. Eight rounds take 3 minutes 50 seconds, because there is no rest after the last one. A bodyweight circuit with 20/10 timing borrows the clock, not necessarily the intensity.
The total time is get ready + sets x (rounds x (work + rest) - rest) + (sets - 1) x set rest. For 40 seconds on, 20 off, 8 rounds, 3 sets and a minute between sets that is 10 + 3 x 460 + 120 = 1,510 seconds, or 25:10, of which 16 minutes are work.
Browsers slow down timers in hidden tabs: Chrome runs them at most once a second, and repeated timers in a tab hidden for five minutes and silent for 30 seconds only once a minute. A timer that adds one second per tick falls behind. This one stores the moment you pressed Start and computes the elapsed time from performance.now(), and it queues its beeps on the Web Audio clock, which keeps running in the background. Sound has to start from a tap because browsers block audio until the page gets one.
Common use cases
HIIT and Tabata sessions
Run 20/10, 30/30 or 40/20 intervals on a bike, rower or with bodyweight moves.
Circuit training
Use sets for stations and the set rest to move between them.
EMOM strength work
Start a set of a lift every minute on the minute for a fixed number of rounds.
Running intervals
Time repeats and recoveries on a treadmill with the phone screen kept awake.
Tips and limitations
- Turn the phone's silent switch off, or use headphones, if you want the beeps on a phone.
- Start with more rest than work (for example 20 s on, 40 s off) if intervals are new to you, and shorten the rest as you adapt.
- If the browser cannot keep the screen awake, set your phone's auto-lock longer for the session.
- Skip moves to the next interval without changing the rest of the plan, which helps when a station is busy.
- If you have a heart condition, are pregnant, or are new to hard exercise, check with a doctor before high-intensity intervals.
Sources and further reading
- Effects of moderate-intensity endurance and high-intensity intermittent training on anaerobic capacity and VO2max, Medicine and Science in Sports and Exercise. Tabata et al. 1996, the 20 s / 10 s protocol
- Heavy throttling of chained JS timers beginning in Chrome 88, Chrome for Developers. Why tick-counting timers drift in background tabs
- Screen Wake Lock API, MDN Web Docs
- Physical Activity Guidelines for Americans, 2nd edition, US Department of Health and Human Services. Weekly aerobic and muscle-strengthening targets and when to talk to a health care provider
Frequently asked questions
How long is a Tabata workout?
Eight rounds of 20 seconds of work and 10 seconds of rest take 3 minutes 50 seconds, because the last round has no rest after it. With a 10-second countdown the timer shows 4:00.
Does the interval timer keep time when I switch tabs or lock my phone?
It measures elapsed time from the clock rather than by counting ticks, so the display is correct as soon as you return, and beeps already queued on the audio clock keep playing in a background tab. A locked phone may suspend the page entirely, so keep the screen on during the workout.
Why is there no sound?
Browsers only allow audio after a tap, so sound starts when you press Start. Check that Sound is on, the volume is up and the phone is not on silent.
What is the difference between rounds and sets?
Rounds are work and rest pairs inside one set. Sets repeat the whole block, with the rest between sets in place of the last normal rest.
What is an EMOM?
Every minute on the minute: you start a set at the top of each minute and rest for the remainder. Use 60 seconds of work, 0 rest and as many rounds as minutes.
Is a 20/10 bodyweight circuit the same as the Tabata study?
Not quite. The study used a cycle ergometer at about 170% of VO2max until exhaustion. The timing is the same, but the effect depends on the intensity you can reach.
Is there an in-depth guide to the Interval Timer?
Yes. “Loading a Barbell, Training by RPE and Timing Intervals” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.