Limiting Reactant Calculator
Enter a reaction and the amount of each reactant to find the limiting reagent, the theoretical yield of every product and how much excess reactant is left over.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Limiting Reactant Calculator?
Enter a chemical equation and how much of each reactant you have, in grams, moles, gas litres or particles. The limiting reactant calculator balances the equation, works out which reactant runs out first, and gives the theoretical yield of every product along with how much of each other reactant is left over, in grams and as a percentage of what you started with.
A comparison table shows the working: the moles of each reactant, those moles divided by the reactant's coefficient, how much is used and how much remains. The smallest moles-per-coefficient value marks the limiting reactant. If two reactants come out equal, you have an exact stoichiometric mixture and the calculator says so instead of picking one.
Leave a reactant blank if it is in excess, such as water in a hydrolysis or "excess zinc" in a textbook problem. At least two reactants need amounts for a comparison; for a single known reactant the stoichiometry calculator is the better fit.
- Balances the equation first, including ionic equations
- Up to six reactant amounts in grams, moles, gas volume or particles
- Theoretical yield of every product, not only the first
- Excess remaining in grams, moles and percent of what was supplied
- Extent of reaction and a moles-per-coefficient comparison table
- Detects exact stoichiometric mixtures
Updated
How to use the Limiting Reactant Calculator
- Type the equation, balanced or unbalanced, or pick an example such as aspirin synthesis or zinc and hydrochloric acid.
- Enter the amount of each reactant and choose its unit. Leave a reactant empty if it is present in excess.
- If any amount is a gas volume, choose the STP convention.
- Read the limiting reactant, the theoretical yield of each product and the excess left of each other reactant.
- Tick "show more digits" to see unrounded values, then copy the summary or share a link to the same inputs.
Worked examples
Silicon nitride (OpenStax Example 4.12)
Input
Si + N2 -> Si3N4; 2.00 g Si; 1.50 g N2
Output
Silicon limits; 3.33 g Si3N4; 0.170 g N2 left
Silicon allows ξ = 0.071212 / 3 = 0.023737 mol, nitrogen 0.053545 / 2 = 0.026772 mol. Silicon gives the smaller value, even though it has more moles. OpenStax names silicon as the limiting reactant; the 3.33 g yield and 0.170 g of leftover nitrogen are computed by this calculator.
Aspirin from salicylic acid
Input
C7H6O3 + C4H6O3 -> C9H8O4 + C2H4O2; 2.00 g salicylic acid; 5.40 g acetic anhydride
Output
Salicylic acid limits; 2.61 g aspirin; 3.92 g acetic anhydride left (72.6% unused)
The reaction is 1:1, so the comparison is just moles: 0.01448 mol salicylic acid against 0.05290 mol anhydride. The anhydride is deliberately in large excess.
Hydrogen and oxygen
Input
H2 + O2 -> H2O; 5.00 g H2; 10.0 g O2
Output
Oxygen limits; 11.3 g water; 3.74 g H2 left
Hydrogen has 2.48 mol but needs only 0.625 mol to use all 0.3125 mol of oxygen. Three quarters of the hydrogen is left unreacted.
Background and insight
A reaction stops when any one reactant is used up. That reactant is the limiting reactant (or limiting reagent), and it alone fixes how much product can form. The mistake most people make is comparing grams, or comparing moles without the coefficients. In 3Si + 2N2 → Si3N4, 2.00 g of silicon is 0.07121 mol and 1.50 g of nitrogen is 0.05354 mol, so nitrogen looks scarcer. Divide each by its coefficient and the picture flips: silicon allows 0.02374 mol of reaction and nitrogen 0.02677 mol, so silicon limits. OpenStax Example 4.12 identifies silicon as the limiting reactant; the yield and leftover figures below are computed by this calculator.
The number you get by dividing moles by the coefficient has a name: the extent of reaction, ξ, defined by IUPAC as the change in amount of a substance divided by its stoichiometric number. The smallest ξ that any reactant allows is the extent the whole reaction reaches. Every product then forms ξ × its coefficient moles, and every other reactant keeps its starting moles minus ξ × its coefficient. The calculator applies that single rule to all species at once, which avoids the trap of computing the product from each reactant separately and forgetting to compare.
Theoretical yield is the ceiling, not a prediction. Side reactions, incomplete conversion and losses in filtering and drying mean the mass you recover is usually lower; the ratio is the percent yield, which the percent yield calculator works out from the same equation.
Common use cases
Limiting reagent homework
Check which reactant limits and the theoretical yield, and see the comparison table that justifies it.
Lab pre-work
Find the theoretical yield to quote in a lab report before calculating percent yield.
Choosing quantities
See how much excess reagent a recipe leaves, and trim it when the excess is wasteful or hard to remove.
Gas reactions
Compare gas volumes at STP with solid or liquid masses in the same reaction.
Tips and limitations
- Never compare grams directly: a heavy molecule can be the one in excess even when its mass is larger.
- Divide moles by the coefficient before comparing. The reactant with the smallest result limits.
- If a reactant is a solution, convert molarity × litres to moles first and enter it in mol.
- An exact stoichiometric mix is rare in practice; a small measurement difference decides which one runs out first.
- The result assumes the reaction goes to completion. Equilibria such as the Haber process stop short, so the theoretical yield is an upper limit.
Sources and further reading
- 4.4 Reaction Yields, OpenStax, Chemistry 2e. Limiting reactant, theoretical yield and Example 4.12
- Extent of reaction, IUPAC Compendium of Chemical Terminology (Gold Book). Definition of ξ
- Abridged standard atomic weights, IUPAC Commission on Isotopic Abundances and Atomic Weights. Values used for molar masses
Frequently asked questions
How do you find the limiting reactant?
Convert each reactant to moles, divide by its coefficient in the balanced equation, and compare. The smallest number belongs to the limiting reactant. The calculator shows those numbers side by side.
Is the reactant with the smaller mass always the limiting reactant?
No. Mass says nothing until you account for molar mass and the coefficients. In 3Si + 2N2 → Si3N4 with 2.00 g Si and 1.50 g N2, silicon has the larger mass and still limits.
How is the excess reactant remaining calculated?
Multiply the extent of reaction (the limiting reactant's moles divided by its coefficient) by the excess reactant's coefficient to get the moles used, subtract from the moles supplied, and convert to grams.
What does "exact stoichiometric mix" mean?
The reactants are in exactly the ratio of their coefficients, so they run out together and nothing is left over. The calculator reports this when two reactants give the same moles-per-coefficient value.
Can I leave a reactant out?
Yes. A blank reactant is treated as in excess, which matches problems that say "with excess oxygen". At least two reactants need amounts so there is something to compare.
What is the extent of reaction shown in the result?
It is how many moles of the reaction as written take place, written ξ. Every product forms ξ times its coefficient and every reactant is used at ξ times its coefficient. IUPAC defines it as the change in amount divided by the stoichiometric number.
Is there an in-depth guide to the Limiting Reactant Calculator?
Yes. “Stoichiometry, Limiting Reactant and Percent Yield, Worked Through” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.