Percent Yield Calculator

Percent yield from actual and theoretical yield, or straight from a reaction and the limiting reactant mass. Solves for any value and computes atom economy.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Percent Yield Calculator?

The percent yield calculator works three ways. Enter an actual yield and a theoretical yield to get the percent yield, or enter any two of the three to solve for the third. Switch to "From an equation" to type the reaction, the mass of limiting reactant you used and the dry mass of product you recovered; the calculator balances the equation, computes the theoretical yield and gives the percent yield in one go.

The third mode gives the atom economy of a reaction: the share of the reactants' mass that ends up in the product you want, if everything went perfectly. It is the green-chemistry companion to percent yield.

Results are rounded to the significant figures of your inputs, with a switch for more digits. A yield above 100% is flagged with the usual reasons it happens.

  • Solves for percent yield, actual yield or theoretical yield
  • Theoretical yield straight from a balanced equation and the limiting reactant amount
  • Atom economy of any product in the equation
  • Warning and likely causes for yields above 100%
  • Significant figures from your inputs, with full precision on request
Read the guide: Stoichiometry, Limiting Reactant and Percent Yield, Worked Through

Updated

How to use the Percent Yield Calculator

  1. Choose a mode: "Actual and theoretical", "From an equation" or "Atom economy".
  2. For the first mode, choose what to solve for and enter the other two values, with masses in the same unit.
  3. For "From an equation", type the reaction, pick the limiting reactant and enter the amount used, then pick the product and enter its dry mass in grams.
  4. For atom economy, type the reaction and pick the product you want.
  5. Read the result and the working, then copy it into your lab report or share the link.

Worked examples

Copper from copper sulfate (OpenStax Example 4.13)

Input

CuSO4 + Zn -> ZnSO4 + Cu; 1.274 g CuSO4; 0.392 g Cu recovered

Output

Theoretical yield 0.5072 g; percent yield 77.3%

1.274 g ÷ 159.602 g/mol = 0.0079824 mol CuSO4, giving the same number of moles of Cu at 63.546 g/mol.

Aspirin in a teaching lab

Input

C7H6O3 + C4H6O3 -> C9H8O4 + C2H4O2; 2.00 g salicylic acid; 2.10 g aspirin

Output

Theoretical yield 2.61 g; percent yield 80.5%

Salicylic acid is the limiting reactant because acetic anhydride is used in excess. The atom economy of the same reaction is 75.0%.

Freon from carbon tetrachloride

Input

CCl4 + HF -> CF2Cl2 + HCl; 32.9 g CCl4; 12.5 g CF2Cl2

Output

Percent yield 48.3%

The equation balances to CCl4 + 2HF → CF2Cl2 + 2HCl. Theoretical yield is 25.86 g. This is the OpenStax 4.13 check-your-learning problem.

Solving for the actual yield

Input

Theoretical 10.0 g; expected yield 80%

Output

Actual yield 8.00 g

Planning works backwards: if a procedure usually gives 80%, aim the theoretical yield at the amount you need divided by 0.80.

Background and insight

Percent yield compares what you got with what the equation says you could have got: percent yield = actual yield ÷ theoretical yield × 100. The theoretical yield comes from the limiting reactant and the mole ratio; the actual yield is the mass of pure, dry product you weighed. OpenStax Example 4.13 makes 0.392 g of copper from 1.274 g of copper(II) sulfate with excess zinc. The theoretical yield is 1.274 ÷ 159.602 × 63.546 = 0.5072 g, so the percent yield is 77.3%.

Yields below 100% are normal. Reactions reach equilibrium, side reactions use up reactant, and product is lost on filter paper and glassware. A yield above 100% is a warning sign rather than a success: the usual causes are a product that is still wet, impurities or unreacted starting material weighed along with it, or a different product (such as a hydrate) from the one in the equation.

Barry Trost introduced atom economy in Science in 1991 to capture a different kind of waste. Atom economy = coefficient × molar mass of the desired product ÷ sum of coefficient × molar mass of all reactants × 100. Adding water to ethene to make ethanol is 100% atom economical; making aspirin from salicylic acid and acetic anhydride is 75.0%, because acetic acid leaves as a by-product. A reaction can have a high percent yield and a poor atom economy, or the reverse, which is why the two are reported separately.

Common use cases

  • Lab reports

    Compute the theoretical and percent yield for a synthesis write-up, with the working to copy.

  • Checking a result

    Spot a yield over 100% that points to a wet or impure product before you hand in a report.

  • Scaling a procedure

    Work out how much to start with when you know the usual percent yield and need a set amount of product.

  • Green chemistry

    Compare routes to the same product by atom economy as well as yield.

Tips and limitations

  • Use the dry mass of the purified product. Solvent left in a solid inflates the yield.
  • The theoretical yield must come from the limiting reactant. If you are unsure which reactant limits, check with the limiting reactant calculator first.
  • Actual and theoretical yields can be in grams, milligrams or moles, as long as both use the same unit.
  • Percent yield and percent error answer different questions. Percent error compares a measurement with an accepted value.
  • Atom economy ignores solvents, catalysts and work-up chemicals, so it understates the true waste of a process.

Sources and further reading

  1. 4.4 Reaction Yields, OpenStax, Chemistry 2e. Theoretical, actual and percent yield, Example 4.13
  2. The Atom Economy: A Search for Synthetic Efficiency, Science, vol. 254 (1991), B. M. Trost. The paper that introduced atom economy
  3. Abridged standard atomic weights, IUPAC Commission on Isotopic Abundances and Atomic Weights. Values used for molar masses

Frequently asked questions

What is the percent yield formula?

Percent yield = actual yield ÷ theoretical yield × 100. With 0.392 g of copper recovered and a theoretical yield of 0.5072 g, the percent yield is 77.3%.

How do I find the theoretical yield for percent yield?

Convert the limiting reactant to moles, multiply by the product's coefficient over the reactant's coefficient, and multiply by the product's molar mass. The "From an equation" mode does this for you.

Can percent yield be more than 100%?

Not for a pure, dry product. A result above 100% usually means the product still holds water or solvent, contains impurities or unreacted starting material, or is a different compound from the one in the equation.

What is a good percent yield?

It depends on the reaction and the number of steps. A simple precipitation can come close to 100%, while a multi-step synthesis loses material at every step, so the overall yield multiplies down quickly.

What is the difference between percent yield and atom economy?

Percent yield measures how much of the possible product you recovered in practice. Atom economy measures how much of the reactants' mass ends up in the desired product even when the reaction works perfectly.

How do I calculate the actual yield from a percent yield?

Multiply the theoretical yield by the percent yield divided by 100. At 80% of a 10.0 g theoretical yield, expect 8.00 g (the precision follows the mass you typed, not the percent). Choose "Actual yield" under "Solve for".

Is there an in-depth guide to the Percent Yield Calculator?

Yes. “Stoichiometry, Limiting Reactant and Percent Yield, Worked Through” covers the background, how it works, common pitfalls and worked examples. Read the full guide.