Cups to Tablespoons Converter

Convert cups to tablespoons with the exact 16 tbsp per US cup, walk the ladder down to teaspoons, and halve or double any recipe amount without guessing.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Cups to Tablespoons Converter?

Halving a recipe stops being easy the moment it asks for 3/4 cup of something: half of that is 6 tablespoons, and most people cannot do that split at the counter. Enter the cups here, as a decimal like 0.75 or 0.5, and the tablespoon and teaspoon rows give the spoon count straight away, with fluid ounces and milliliters alongside for anything else the recipe throws in.

These particular conversions come out as clean whole numbers because the units are cut from the same cloth: a US cup is exactly 16 US tablespoons, each tablespoon is exactly 3 teaspoons, so a cup is 48 teaspoons and every common fraction of a cup lands on a countable number of spoons. The converter shows the exact chain rather than an approximation, so 0.5 cup reads 8 tablespoons, not 7.99.

It all runs on the device in front of you, with nothing sent anywhere. Choosing a row opens the working built from the exact definitions, and the report bar below packages the results as a CSV or PDF, or hands you a link that reopens the page with your amount already entered.

  • Cups to tablespoons and teaspoons with the exact 16 and 48 per cup ratios
  • Whole-number results for every common cup fraction
  • Fluid ounce and milliliter rows for cross-checking foreign recipes
  • Working steps that trace each result back to the gallon-based definitions
  • Local-only computation with CSV, PDF and share-link export under the tool
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Cups to Tablespoons Converter

  1. Type the cups as a decimal: 0.5 for half a cup, 0.75 for three quarters, 0.33 for a third.
  2. Read the Tablespoon (US) row, and the Teaspoon (US) row when the tablespoons are not whole.
  3. Flip the direction by setting the From unit to Tablespoon (US) and entering the spoon count.
  4. Open any row to watch the working apply the exact 16 tablespoons per cup chain to your number.
  5. Use the report bar to save the table as CSV or PDF or to copy a link with your value in it.

Worked examples

Half a cup

Input

0.5 cup

Output

8 tbsp

Half of 16 is 8, exactly. The table also shows 24 teaspoons, 4 US fluid ounces and 118.29 mL, all the same amount expressed down the ladder.

Three quarters of a cup

Input

0.75 cup

Output

12 tbsp

The amount that breaks mental halving: a recipe needing half of 3/4 cup needs 6 tablespoons, which the converter reaches by entering 0.375.

A third of a cup

Input

0.3333 cup

Output

5.3328 tbsp

A third of 16 tablespoons is 5 1/3, so measure 5 tablespoons plus 1 teaspoon, since a third of a tablespoon is exactly one teaspoon.

A quarter cup

Input

0.25 cup

Output

4 tbsp

Four tablespoons, or 12 teaspoons, or 2 US fluid ounces. Doubling a recipe turns this into 8 tablespoons, which is the moment to switch back up to half a cup.

Background and insight

The ladder goes back to the US gallon: 16 cups to the gallon, 16 tablespoons to the cup, 3 teaspoons to the tablespoon. In milliliters that makes the US tablespoon 14.78676478125 mL, half a US fluid ounce, and the teaspoon 4.92892159375 mL. Because each rung is an exact integer ratio, recipe arithmetic done in spoons never accumulates rounding, which is why bakers drop down to spoons when dividing amounts.

The memorable fractions are worth keeping on a card: 3/4 cup is 12 tablespoons, 2/3 cup is 10 tablespoons plus 2 teaspoons, 1/2 cup is 8, 1/3 cup is 5 tablespoons plus 1 teaspoon, 1/4 cup is 4, and 1/8 cup is 2 tablespoons. The thirds do not divide evenly into tablespoons alone, which is where the teaspoon rung earns its place: half of 1/3 cup, the classic stumper, is 2 tablespoons plus 2 teaspoons.

Spoon sizes stop being universal outside the US. Metric recipe spoons in the UK and most of Europe are a flat 15 mL and 5 mL, close enough to US spoons that no one adjusts. Australia is the outlier with a 20 mL tablespoon, four of its 5 mL teaspoons, so an Australian recipe's tablespoon of baking powder is a third more than a US one, a gap big enough to taste in a single batch.

Common use cases

  • Halving and doubling recipes

    Split 3/4 cup or 1/3 cup into exact spoon counts instead of eyeballing a half-full cup.

  • Measuring without a full set

    Stand in for a missing 1/4 or 1/8 cup measure with the tablespoons you do have.

  • Small-batch cooking

    Scale a four-portion sauce down to one portion, where every amount drops below a cup.

  • Translating foreign spoon sizes

    Check whether an Australian 20 mL tablespoon or a metric 15 mL one changes the amount enough to matter.

Tips and limitations

  • Half of 1/3 cup is 2 tablespoons plus 2 teaspoons; half of 3/4 cup is 6 tablespoons. The thirds always need the teaspoon rung.
  • Level the spoon with a straight edge for dry ingredients; a heaped tablespoon can carry half as much again.
  • Cutlery spoons are not measuring spoons. A dinner spoon ranges anywhere from 10 to 18 mL depending on the maker.
  • Treat an Australian recipe's tablespoon as 4 teaspoons, not 3; for everything else the metric 15 mL spoon and the US spoon are interchangeable in practice.
  • There is no separate dry tablespoon: spoons measure volume, and the same spoon serves flour and oil alike. What changes between ingredients is weight, not volume.

Sources and further reading

  1. NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology. Tablespoon and teaspoon as subdivisions of US liquid measure
  2. Tablespoon, Wikipedia. US 14.79 mL, metric 15 mL and Australian 20 mL tablespoons
  3. NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology

Frequently asked questions

How many tablespoons are in half a cup?

Eight US tablespoons, or 24 teaspoons. The US cup is defined as 16 tablespoons, so every halving stays a whole number: 8 for a half, 4 for a quarter, 2 for an eighth.

How many tablespoons are in 1/3 cup?

5 1/3 tablespoons. Measure it as 5 tablespoons plus 1 teaspoon, because a teaspoon is exactly a third of a tablespoon. Entering 0.3333 in the converter shows the decimal form, 5.333 tbsp.

How do I halve 1/3 cup?

Half of 1/3 cup is 1/6 cup, which is 2 tablespoons plus 2 teaspoons. It is the most awkward split in recipe scaling, and dropping to spoons is the only way to measure it exactly.

How many tablespoons are in 3/4 cup?

Twelve. Three quarters of 16 is 12, so you can also build it as a half cup plus a quarter cup, or as 6 tablespoons when the recipe is being halved.

Is an Australian tablespoon the same as a US tablespoon?

No. Australia standardized a 20 mL tablespoon of 4 teaspoons, while the US tablespoon is 14.79 mL and the metric spoon used in the UK and Europe is 15 mL. For leavening, spices and salt, adjust Australian tablespoons down by a quarter.

Are liquid and dry tablespoons different measures?

No, a tablespoon is one volume, 14.78676478125 mL in the US, whatever goes in it. Dry and liquid measuring cups differ only in how easy they make levelling or pouring, not in the amount they hold.

How many teaspoons are in a cup?

48 US teaspoons, from 16 tablespoons of 3 teaspoons each. It is rarely worth measuring a full cup in teaspoons, but the number makes scaling tiny amounts consistent: 1/16 cup is exactly 3 teaspoons.

Is there an in-depth guide to the Cups to Tablespoons Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.