Area Converter

Convert square feet, square meters, acres, hectares and square yards in one pass, with every acre figure tied to the exact 4,046.8564224 m² definition.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Area Converter?

Give the page one area and it returns all nine units together: square meters, square kilometers, square centimeters, square millimeters, square inches, square feet, square yards, acres and hectares. Land listings, floor plans and datasheets rarely agree on a unit, and seeing the full spread at once beats converting pair by pair.

Area factors are the squares of length factors, which is where most hand conversions fail. A foot is 0.3048 m, so a square foot is 0.3048 squared, 0.09290304 m², not 0.3048 of anything; a meter-to-foot slip of 3.28 becomes a 10.76 error in area. The acre inherits exactness the same way: 43,560 square feet times 0.09290304 gives precisely 4,046.8564224 m², the figure this tool uses for every acre row.

All of it is computed on your machine, with no value sent anywhere. Expanding a result shows the squared definition that produced it, and the report bar exports the complete table to CSV or PDF, or copies a link that brings your area along for whoever opens it.

  • Nine area units from square millimeters to square kilometers in a single result table
  • Acre and hectare rows for land, exact to the 4,046.8564224 m² statute definition
  • Step panel that shows the squared length factor behind each conversion
  • Handles tiny cross-sections and whole regions in the same input, with scientific notation
  • Local-only calculation plus CSV, PDF and share-link export from the report bar
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Area Converter

  1. Enter the area value you have, from a floor plan, listing or survey.
  2. Set the unit it was quoted in, square millimeters through square kilometers, acres or hectares.
  3. Review the table of all nine area units computed from that single figure.
  4. Open a target unit to see the working, including the squared length definition, such as 1 ft² = 0.09290304 m².
  5. Download the table as CSV or PDF or grab the share link from the report bar.

Worked examples

A house in both systems

Input

1,500 ft²

Output

139.35456 m²

1,500 x 0.09290304 = 139.35456 m² exactly. The reverse shortcut of dividing square meters by 0.09290304, or multiplying by 10.7639, recovers the square footage.

An acre in metric

Input

1 ac

Output

4,046.8564224 m² = 0.404686 ha

The acre is 43,560 ft², and each square foot is 0.09290304 m², so the metric figure is exact. An acre is therefore a bit under half a hectare.

Hectares to acres

Input

1 ha

Output

2.471054 ac

A hectare is 10,000 m², and dividing by 4,046.8564224 gives 2.471054 acres. Farms quoted in hectares roughly match acre figures multiplied by 2.5.

A room in square feet

Input

120 m²

Output

1,291.669250 ft²

Each square meter contains 10.763910 ft², so a 10 m by 12 m floor is about 1,292 square feet. Multiplying the lengths first (32.81 ft x 39.37 ft) gives the same answer, confirming the squared factor.

Background and insight

The acre began as the field a yoke of oxen could plough in a day, and its statute form still shows the plough: one furlong (660 feet, a "furrow long") by one chain (66 feet), a deliberately long and narrow strip because turning the team was the slow part. Multiplying 660 by 66 gives the famous 43,560 square feet, and since 1959 that has meant exactly 4,046.8564224 m². US property, farmland and parks are still described in acres, as is rural land in several Commonwealth countries.

Metric land measure went a different way: the hectare is simply a 100 m by 100 m square, 10,000 m², adopted alongside the metric system and accepted for use with the SI. One hectare is about 2.4711 acres, and one square kilometer holds exactly 100 hectares, which makes national statistics and maps far easier to aggregate than acre-based records.

Inside buildings the square foot and square meter compete. Real estate in the US, Canada, the UK and India commonly quotes floor area in square feet, while architects, regulations and most of the world work in square meters; 10.7639 square feet make one square meter. Square yards persist in carpet and fabric, and in South Asian property as the gaz, while square inches and the tiny metric squares handle materials, screens and cross-sections.

Common use cases

  • Property listings

    Compare homes and plots advertised in square feet, square meters, acres or hectares on one basis before viewing.

  • Landscaping and farming

    Match seed, fertilizer and sod coverage rates quoted per 1,000 ft², per acre or per hectare to your actual ground.

  • Flooring and decorating

    Buy the right amount of tile, carpet or paint when the room is measured in one unit and the product coverage in another.

  • Engineering drawings

    Convert cross-sections and panel areas between square millimeters, square centimeters and square inches without squaring factors by hand.

Tips and limitations

  • Never reuse a length factor for area; square it first. The meter-to-foot factor 3.2808 becomes 10.7639 for square meters to square feet.
  • Confusing acres with hectares misstates land by a factor of about 2.47, a common error in cross-border farm and forestry figures.
  • For irregular plots, convert the total area rather than each side; converting rounded side lengths and multiplying compounds the rounding.
  • There are 100 hectares in a square kilometer and 10,000 square meters in a hectare, so metric land figures shift by clean powers of ten.
  • Floor areas in listings may be gross or usable; convert the number, but check which area definition the listing used before comparing homes.

Sources and further reading

  1. NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology. Area units including the acre and its square footage
  2. Acre, Wikipedia. The furlong-by-chain origin and the 4,046.8564224 m² value
  3. NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology

Frequently asked questions

Why is an acre 43,560 square feet?

Because the statute acre is one furlong by one chain: 660 feet times 66 feet. The shape comes from medieval ploughing, where long furrows minimized turning the ox team, and the product happens to be 43,560.

How many acres are in a hectare?

About 2.471054. A hectare is a 100 m square, 10,000 m², while an acre is exactly 4,046.8564224 m², so a hectare is roughly two and a half acres.

How many square feet are in a square meter?

About 10.763910. The exact relation runs the other way: one square foot is exactly 0.09290304 m², the square of the 0.3048 m foot, and the 10.7639 figure is its reciprocal.

How many square meters are in an acre?

Exactly 4,046.8564224 m², which follows from 43,560 square feet at exactly 0.09290304 m² each. Rounded figures like 4,047 or 4,000 appear in casual use, but the full value is a definition.

How many square inches are in a square foot and a square yard?

144 square inches make a square foot (12 squared) and 1,296 make a square yard (36 squared). Squaring the length ratio is the rule for every area conversion, which is why the numbers grow so fast.

Is a football field about an acre?

Close. An American football playing field of 300 by 160 feet is 48,000 ft², about 1.1 acres, and 1.32 acres with both end zones. It remains the most common mental picture for an acre in the US.

Is there an in-depth guide to the Area Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.