Temperature Converter
Convert Celsius, Fahrenheit, Kelvin and Rankine with the offset formulas written out, reference points like -40 and absolute zero, and exportable results.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Temperature Converter?
Enter a temperature on any of the four scales and the page shows it on all of them at once: Celsius, Fahrenheit, Kelvin and Rankine. Temperature is the one quantity where you cannot just multiply by a factor, because the scales start from different zero points, so each row is computed with the proper offset formula rather than a ratio.
The formulas are the standard ones: Fahrenheit to Celsius is (F - 32) x 5/9, Kelvin is Celsius plus 273.15, and Rankine is Fahrenheit shifted so that zero sits at absolute zero. Because 5/9 is not a tidy decimal, doing this by hand invites mistakes like multiplying before subtracting 32; the working panel lays the operations out in order so you can see exactly where each number came from.
All four results are produced by your own browser with nothing sent to a server. The step panel prints the formula with your value substituted in, and the report bar gives you the table as CSV or PDF, or a link that carries the temperature to anyone you send it to.
- Celsius, Fahrenheit, Kelvin and Rankine computed together from one reading
- Offset-aware formulas rather than naive multiplication, shown step by step
- Reference points built in: absolute zero, freezing, body heat and the -40 crossover
- Negative and fractional temperatures handled across all four scales
- In-browser calculation with CSV and PDF export and a shareable link
Updated
How to use the Temperature Converter
- Type the temperature, negative values included.
- Pick the scale the reading is on: Celsius, Fahrenheit, Kelvin or Rankine.
- Read the other three scales from the table, computed with offset formulas rather than simple factors.
- Open the working steps for any target scale to see the formula applied to your number, for example (98.6 - 32) x 5/9 = 37.
- Export the conversions as CSV or PDF from the report bar, or share a link with your reading preset.
Worked examples
Body temperature
Input
98.6 °F
Output
37 °C
Subtract 32 to get 66.6, multiply by 5/9 and you land on exactly 37 Celsius. The figure is no accident: 98.6 is itself the Fahrenheit rendering of the classic 37 degree clinical reference.
Room temperature
Input
20 °C
Output
68 °F, 293.15 K
20 x 9/5 = 36, plus 32 gives 68 Fahrenheit. Adding 273.15 gives the kelvin value, since the two scales differ only by a shift.
Absolute zero
Input
0 K
Output
-273.15 °C, -459.67 °F, 0 °R
The coldest possible temperature on each scale. Kelvin and Rankine both start here, which is why thermodynamic equations use them instead of Celsius or Fahrenheit.
Where the scales cross
Input
-40 °C
Output
-40 °F
Setting C = F in the conversion formula gives -40 as the single temperature where Celsius and Fahrenheit read the same, a useful sanity check for any converter.
Background and insight
Daniel Gabriel Fahrenheit built his mercury scale in 1724 around brine, water and body-heat reference points, which left water freezing at 32 and boiling at 212, a 180 degree span. Anders Celsius proposed his hundred-step scale in 1742, originally with boiling at 0 and freezing at 100; it was flipped soon after into the form used nearly everywhere today. The United States, a few Caribbean nations and some older US-aligned industries are the main places Fahrenheit still rules daily life.
The kelvin is different in kind: it is the SI base unit of thermodynamic temperature, counting up from absolute zero, the point where no more thermal energy can be removed. Zero kelvin equals -273.15 Celsius, and a kelvin step is the same size as a Celsius degree, so conversion is a pure shift. Since the 2019 SI revision the kelvin has been defined by fixing the Boltzmann constant at 1.380649 x 10^-23 joules per kelvin, cutting the last tie to the properties of water.
Rankine does for Fahrenheit what kelvin does for Celsius: an absolute scale with Fahrenheit-sized degrees, where absolute zero is 0 R and water freezes at 491.67 R. It appears mostly in US thermodynamics, aerospace and power-plant work where equations need absolute temperatures but the source data is in Fahrenheit.
Common use cases
Cooking from foreign recipes
Turn a 180 Celsius oven setting into 356 Fahrenheit, or the other way, before preheating.
Weather and travel
Make sense of forecasts abroad, where 30 degrees can mean a heatwave or a hard frost depending on the scale.
Lab and engineering work
Shift measured Celsius or Fahrenheit data onto the absolute kelvin or Rankine scales that gas-law and heat-transfer equations require.
Checking equipment
Verify thermostat, freezer and incubator settings when the manual and the display use different scales.
Tips and limitations
- Subtract 32 before scaling when going from Fahrenheit to Celsius; applying 5/9 first is the classic error and the steps panel makes the order explicit.
- For a quick estimate, halve the Fahrenheit value after subtracting 30: 70 F is roughly (70 - 30) / 2 = 20 C, close to the exact 21.1.
- Temperature differences convert by factor alone: a rise of 10 Celsius degrees is a rise of 18 Fahrenheit degrees, with no 32 involved.
- Kelvin takes no degree sign: write 300 K, not 300 °K.
- Nothing can read below 0 K or 0 R; if a conversion produces one, the input or the chosen scale is wrong.
Sources and further reading
- The International System of Units (SI Brochure), BIPM. The kelvin definition via the Boltzmann constant
- NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Temperature conversion relations in section B.8
- Fahrenheit, Wikipedia. History of the scale and its fixed points
- Rankine scale, Wikipedia
Frequently asked questions
How do you convert Celsius to Fahrenheit?
Multiply by 9/5 and add 32: F = C x 9/5 + 32. So 25 Celsius is 25 x 1.8 + 32 = 77 Fahrenheit. Going the other way, subtract 32 first and then multiply by 5/9.
At what temperature are Celsius and Fahrenheit equal?
At -40. Solving C = C x 9/5 + 32 gives -40 as the only crossing point, so -40 °C and -40 °F describe the same cold. Every other temperature differs between the scales.
What is absolute zero in Celsius, Fahrenheit and Kelvin?
Absolute zero is 0 K, -273.15 °C and -459.67 °F. It is the floor of thermodynamic temperature, the point where no further thermal energy can be extracted, and no real system can be cooled exactly to it.
Why is there no degree sign with kelvin?
Because the kelvin is an SI base unit, not a scale of degrees. The 13th CGPM renamed the old "degree Kelvin" to simply the kelvin in 1967, so correct usage is 310 K, while Celsius and Fahrenheit keep the degree symbol.
What is the Rankine scale and who uses it?
Rankine is the absolute scale with Fahrenheit-sized degrees: 0 °R is absolute zero and °R = °F + 459.67. It survives mainly in US thermodynamics and aerospace calculations where formulas need absolute temperature but instruments read Fahrenheit.
What is 180 degrees Celsius in Fahrenheit for baking?
356 °F, from 180 x 9/5 + 32. Most US recipes would round that to 350 °F, a difference of about 3 Celsius degrees that rarely matters for home ovens, which cycle more widely than that anyway.
Is there an in-depth guide to the Temperature Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.