Canada version. Rooms in feet as Canadians measure them, paint in the 946 mL, 3.78 L and 18.9 L cans sold here, prices in CA$, and the federal VOC limits printed on Canadian labels. US version
Paint Calculator (Canada)
Work out how much paint a room needs from its size in feet, coats and coverage, then the 3.78 L cans, 18.9 L pails and 946 mL cans to buy, with prices in CA$.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Paint Calculator?
Paint in Canada is sold in litres but in US gallon sizes: a 3.78 L can is one US gallon, an 18.9 L pail is five, and a 946 mL can is a quart. Rooms are still measured in feet, so this version keeps feet and square feet and labels the cans the way Canadian stores do.
An 11 by 12 foot bedroom with 8 foot walls, a door and a window has 332 sq ft of wall. At 400 sq ft per can for one coat, two coats need 1.66 cans, so you buy two 3.78 L cans. Three bedrooms the same size come to 4.98 cans, and the calculator suggests one 18.9 L pail instead of five cans.
Basements are where Canadian estimates usually go wrong. Fresh drywall and joint compound soak up paint, so a primer coat goes on first, and a 24 by 16 foot rec room with its ceiling needs 4.85 cans of finish paint plus 3.23 cans of primer.
- Walls, ceiling or both, with doors, windows and other areas subtracted
- Separate coat counts for walls and ceiling, plus optional primer
- Shopping list in 5 gallon, 1 gallon and quart sizes, or 10, 5, 2.5 and 1 litre tins
- Imperial and metric inputs that convert when you switch
- Cost from your own can prices, copy and share link, all in the browser
Updated
How to use the Paint Calculator
- Leave the units on imperial and measure the room in feet. A standard interior door is about 21 sq ft.
- Choose walls, ceiling or both and the number of coats.
- On screen, "gal" means one 3.78 L can and "qt" one 946 mL can.
- Enter the coverage per can from the label. Canadian labels often give it in both square metres and square feet; use the square feet figure for one 3.78 L can.
- Add a primer coat for new drywall or a big colour change, with the primer label coverage.
- Enter your prices in CA$ for the pail, the 3.78 L can and the 946 mL can.
Worked examples
Bedroom, 11 x 12 ft
Input
8 ft walls, 1 door (21 sq ft), 1 window (15 sq ft), 2 coats, 400 sq ft per 3.78 L can
Output
332 sq ft of wall; 1.66 cans (6.3 L); buy two 3.78 L cans
The second can will be about two-thirds used; keep the rest, labelled with the room, for touch-ups.
Finished basement with new drywall
Input
24 x 16 ft rec room, 8 ft walls, 2 doors, 2 small windows (6 sq ft), walls and ceiling, 1 primer coat at 300 sq ft per can, 2 coats at 400
Output
970 sq ft painted; 4.85 cans of paint, so one 18.9 L pail; 3.23 cans of primer: three 3.78 L cans and a 946 mL can
The primer goes on the bare drywall first. The pail covers both finish coats with a little to spare, and buying it as one batch keeps the colour even on the long basement walls.
Three bedrooms the same colour
Input
3 rooms of 11 x 12 ft, walls only, 2 coats, 400 sq ft per can
Output
996 sq ft; 4.98 cans; buy one 18.9 L pail
A pail is five 3.78 L cans in one batch, so the colour is the same in every room.
Background and insight
Coverage is the number that matters most and the one people skip. Manufacturers state a spreading rate for one coat at the film thickness the paint is designed for, usually on a smooth, sealed surface. Rough or porous surfaces, bare drywall, fresh plaster and textured ceilings soak up more, so the real figure can fall to 250 square feet per gallon or lower. Big colour changes, especially light over dark, often need a third coat or a tinted primer. That is why the calculator lets you choose a surface preset or type the figure from your can.
Openings are subtracted by area. A standard interior door of 3 by 7 feet is 21 square feet and a 3 by 5 foot window is 15 square feet, which are the defaults. Painters often ignore small windows because cutting in around them uses nearly as much paint as the glass would have taken; subtracting them gives the leanest honest estimate, and the extra percentage puts some back.
Two coats are the norm for new colour on walls. The first coat hides most of the old colour and evens out porosity; the second gives the uniform sheen and colour the manufacturer tested. Ceilings in flat white over the same white are often fine with one coat.
Common use cases
Repainting a room
Check whether one gallon is enough or you need two before driving to the store, and avoid opening a second batch mid-wall.
New drywall
Add a primer coat with its own coverage figure so the primer and finish paint are bought together.
Whole-house quotes
Price several identical bedrooms at once and compare 5 gallon buckets against single gallons.
Ceilings only
Estimate ceiling white for a whole floor, where one coat over the same colour is often enough.
Tips and limitations
- Federal regulations limit the VOC content of architectural paints sold in Canada by product category, so low-VOC interior latex is the norm on store shelves.
- Paint in older homes, especially those built before 1960, may contain lead; avoid dry sanding or heat-stripping old layers.
- Paint basements when the space is warm and dry; cold concrete and high humidity slow drying and can cause peeling.
- Box the cans: mix every can of one colour in a pail before you start.
Sources and further reading
- Volatile organic compound concentration limits for architectural coatings regulations, Environment and Climate Change Canada
- Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations (SOR/2009-264), Justice Laws Website. Limits by coating category and who must comply.
Frequently asked questions
How much paint do I need for a bedroom?
For an 11 by 12 foot bedroom with 8 foot walls, one door and one window, about 1.7 cans of 3.78 L for two coats at 400 sq ft per can. That is two cans for the walls and usually one more for the ceiling.
Is a 3.78 L can of paint a gallon?
Yes, a US gallon (3.785 L). Canadian paint is sold in US gallon multiples labelled in litres: 946 mL (a quart), 3.78 L and 18.9 L (five gallons). An imperial gallon would be 4.55 L, which paint is not sold in.
How much primer do I need for new drywall in a basement?
One coat over the whole area. Drywall primer often covers a little less than paint, so with 300 sq ft per can a 24 by 16 foot basement room with its ceiling needs about 3.2 cans of primer.
Is an 18.9 L pail cheaper than five cans?
Usually it costs less per litre, and it is one batch. Enter your store prices for each size and the calculator totals its suggested mix so you can compare.
What are the VOC rules for paint in Canada?
The federal Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations set maximum VOC levels for 53 categories of architectural coatings, including interior and exterior paints, and apply to manufacturers, importers and sellers.
How much does a 3.78 L can of paint cover?
Read the label: many interior latex paints list about 350 to 400 sq ft (33 to 37 m²) per 3.78 L can for one coat on a smooth, primed wall. Rough, porous or textured surfaces get less, so enter a lower figure for them.
Is there an in-depth guide to the Paint Calculator?
Yes. “How Much Paint Do I Need? Coverage, Coats and Cans” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.