TAM, SAM and SOM for UK Startups: Sizing in Pounds

Size a UK market bottom-up from DBT business population counts, avoid the 4.1 million non-employer trap, and check SOM against what your sales team can close.

By · · 7 min read

Illustration for the TAM SAM SOM Calculator guide

United Kingdom edition. Written for UK founders: customer counts from the Department for Business and Trade business population estimates 2026 (employers, size bands, sectors and nations), prices in pounds excluding VAT, a construction worked example and a capacity check on SOM. US edition

A UK market slide earns attention when it starts from a count of firms that could buy, multiplies by an annual price in pounds, and then narrows that honestly to the share you can win in three to five years. The UK has an official count for the first step: the Department for Business and Trade's business population estimates, whose 2026 edition, published on 5 November 2026, puts the private sector at 5,586,835 businesses at the start of 2026. The usual mistake is to multiply the headline number. This edition shows the trap, works a full bottom-up example for a construction product with the UK TAM SAM SOM calculator, and checks the result against what a small sales team can actually close.

The three numbers

  • TAM, total addressable market: annual revenue if every possible buyer bought at your price.
  • SAM, serviceable available market: the part of TAM your product, channels and coverage can serve now.
  • SOM, serviceable obtainable market: the part of SAM you can realistically win in a stated period, given competitors and your own capacity.

All three are annual figures in the same currency. Use prices excluding VAT, because VAT you collect is not revenue.

The UK count, and the 4.1 million trap

The DBT release splits the 5.6 million businesses in ways that matter for a B2B product:

Start of 2026Businesses
All private sector businesses5,586,835
Employers (at least one employee besides the owners)1,471,660 (26%)
Non-employers4,115,175 (74%)
Micro, 1 to 9 employees1,198,870
Small, 10 to 49225,215
Medium, 50 to 24939,220
Large, 250 or more8,355

The release also says about 2.9 million businesses (52%) were trading without being registered for VAT or PAYE. If your product only makes sense for a firm with staff (payroll, rotas, job costing, anything per seat), a TAM built on 5.6 million is four times too big, and an investor who knows the DBT tables will notice. Start from the 1.47 million employers or from the size bands you serve.

The release gives sector and nation counts too. Among SMEs, construction is the largest sector at 846,000 businesses (15%), then professional, scientific and technical at 778,000 (14%) and wholesale and retail at 523,000 (9%). By nation, there are 4.9 million businesses in England, 359,000 in Scotland, 196,000 in Wales and 129,000 in Northern Ireland.

A bottom-up example: job costing for builders

Suppose you sell a quoting and job-costing app to construction firms at £35 a month, £420 a year excluding VAT. In the calculator, choose Bottom-Up (Customer Count):

  1. Total Addressable Customers: 846,000, the construction SMEs in the 2026 release. Average Revenue per Customer: 420. TAM: £355.3M.
  2. SAM Percentage: 26. A job-costing tool for a team needs employees, and the sector count includes businesses with none. The release gives the employer share for the whole economy, 26%, not for construction, so this is a stand-in you should replace with the construction figure from the DBT detailed tables by industry and size. Geographic Reach: 100, because the count is UK-wide and you sell UK-wide. Business Model Fit: 80, for the firms whose jobs suit an app at all. SAM: £73.9M.
  3. Target Market Share: 5, Competitive Factor: 70, Resource Availability: 60. These assume competition from spreadsheets and established packages, and a young company that cannot cover the whole country at once. SOM: £1.6M (£1,552,038).

Write each reason in Key Assumptions and the table and edition in Data Sources ("DBT business population estimates 2026, start of 2026"), because the counts are revised every year. The Revenue Projection line is SOM × 0.85, a fixed haircut; replace it with your own forecast if you have one.

Check SOM against sales capacity

A percentage of SAM is easy to type and hard to defend. A capacity check asks how many firms your team can sign. Two salespeople closing six firms a week each, for 46 working weeks a year, sign 552 firms a year, and 1,656 over three years if none of them leave. At £420 a year that is about £695,520 of annual revenue, well under half the £1.6M the percentages gave.

When the two disagree, present the lower one, or explain what changes (a partner channel, a self-serve trial) would close the gap. The capacity figure is the one an investor can test against your hiring plan.

Category spend against revenue at your price

The base Market Sizing Calculator works from total category spend rather than your price. Suppose each employing construction SME spends £2,400 a year on all its software. Taking 26% of the 846,000 as employers, Industry Size is 846,000 × 0.26 × £2,400 = £527.9M. With SAM as % of TAM at 80, Market Penetration 3% and 6 competitors (a competition factor of 0.82), SOM is about £10.4M, or 4,329 firms at £2,400 each. At your £35 a month those same firms are worth about £1.8M a year.

The £10.4M and the £1.8M describe the same firms; your app captures £420 of each firm's £2,400 software budget. Quote the second as revenue, never the first.

Mistakes that weaken a UK market slide

  • Using 5.6 million businesses for an employer product. Three in four have no employees besides the owners.
  • VAT-inclusive prices. A price quoted to customers including VAT overstates revenue; enter the price excluding VAT.
  • Double filtering a nation. If you use the 359,000 Scottish businesses as your count, leave Geographic Reach at 100; cutting it again counts the same limit twice.
  • Mixing editions. The release is published each autumn; use one edition for every count on the slide and say which.
  • Population instead of buyers. ONS puts the UK population at 69.5 million in mid-2025, a starting point for a consumer product only once you narrow it to households, ages or regions that buy.
  • The 1% argument. "1% of a £50 billion market" skips every step above. SOM should come from capacity and conversion.

What to do next

Build the bottom-up figure first, then check it against capacity, then make sure each customer is profitable with the LTV:CAC guide and the LTV-CAC Calculator. If you are raising, the UK guide to cap tables and option pools covers what the round does to ownership.

Frequently asked questions

How many businesses are there in the UK?

5,586,835 private sector businesses at the start of 2026, according to DBT's business population estimates published on 5 November 2026. 1,471,660 of them were employers and 4,115,175 had no employees besides the owners.

Should a UK B2B TAM use all 5.6 million businesses?

Only if a business with no staff would buy your product. For anything sold to firms with employees, use the 1.47 million employers or the relevant size band, such as 225,215 small (10 to 49 employees) and 39,220 medium (50 to 249) businesses.

How many construction businesses are there in the UK?

The 2026 release counts 846,000 construction SMEs, 15% of all SMEs and the largest sector. The count includes businesses with no employees, so narrow it to employers before sizing a team product.

How do I make SOM credible?

Derive it from sales capacity as well as a share of SAM. Two salespeople closing six firms a week for 46 weeks sign 552 firms a year; at £420 each that is about £231,840 of new annual revenue a year, which is easy for an investor to test.

Sources and further reading

Open the TAM SAM SOM Calculator

More Validation & Research

Every tool in the Validation & Research section, free and in your browser.