United Kingdom version. Metric by default, with 20 kg and 25 kg bags, ready-mixed concrete priced per cubic metre in pounds, and UK guidance on mixes, paving and lifting. US version
Concrete Calculator (UK)
Work out cubic metres of concrete and 20 kg or 25 kg bags for patios, shed bases, footings and fence posts, with waste and a ready-mix or bag cost in pounds.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Concrete Calculator?
In the UK concrete is ordered by the cubic metre and bagged mix comes in 20 kg and 25 kg sacks, so this version starts in metric. A 3 by 3 metre patio base poured 100 mm thick needs 0.9 cubic metres; with 10% added for an uneven sub-base that is 0.99 cubic metres, which is 85 bags of 25 kg or 106 bags of 20 kg.
That bag count is the real decision. Eighty-five 25 kg bags is more than two tonnes of dry mix to carry and mix by hand, while 1 cubic metre of ready-mixed or mix-on-site concrete arrives in one visit. The cost panel puts both options side by side in pounds, using your own quotes.
Pick the shape you are pouring (a slab, a strip footing, round post holes, a wall, a kerb or a flight of steps), enter the sizes in metres and centimetres, and the tool gives the volume, the bags for each sack size and a ready-mix order rounded up to the step your supplier quotes in. For the cement, sand and ballast in a hand mix, or which mix to use, see the [Concrete Mix Ratio Calculator (UK)](/en-gb/concrete-mix-ratio-calculator).
- Six pour shapes: slab, footing, round column or hole, wall, curb and gutter, and steps with an optional landing
- Imperial and metric inputs that convert in place when you switch
- Bag counts for 40, 50, 60 and 80 lb and 20 or 25 kg bags from published yields
- Ready-mix order rounded to an editable increment, plus cost for bags and ready-mix
- Formula panel, copy and share link; runs entirely in the browser
Updated
How to use the Concrete Calculator
- Leave the units on metric. Lengths are in metres; thickness, diameter and step sizes are in centimetres.
- Choose the shape and enter its sizes. For a run of identical pours, such as fence posts, set the quantity.
- Set the extra allowance: about 5% for a formed slab on a level, compacted hardcore base, 10% or more for dug footings and post holes.
- Pick 20 kg or 25 kg bags to match what your builders merchant sells, and check the yield printed on the sack.
- Enter the price per bag and your ready-mix quote per cubic metre (include any part-load charge) to see which works out cheaper.
Worked examples
Patio base, 3 m x 3 m at 100 mm
Input
Slab 3 m x 3 m x 10 cm, 10% extra, 25 kg bags
Output
0.99 m³; 85 bags of 25 kg or 106 of 20 kg; ready-mix order 1 m³
The net volume is 0.9 m³. At this size a single cubic metre of ready-mixed or volumetric concrete is usually less work than 85 sacks, but a small load may carry a part-load charge, so price both in the cost panel.
Shed base, 2.4 m x 1.8 m at 100 mm
Input
Slab 2.4 m x 1.8 m x 10 cm, 5% extra, 25 kg bags
Output
0.454 m³; 39 bags of 25 kg or 49 of 20 kg; ready-mix order 0.5 m³
A common 8 by 6 foot shed footprint. Thirty-nine bags is a day of mixing for two people, which is why many people hire a mixer or order a small volumetric load for bases of this size.
Ten fence posts in 300 mm holes, 600 mm deep
Input
Round columns 30 cm diameter x 0.6 m deep, quantity 10, 10% extra
Output
0.467 m³; 40 bags of 25 kg or 50 of 20 kg
Post holes use more concrete than people expect: each 300 mm hole 600 mm deep takes about 4 bags of 25 kg. Rapid-setting post mix yields less per bag than general-purpose concrete, so check its sack before buying.
Background and insight
Bag counts use published yields rather than weight. The QUIKRETE Concrete Mix data sheet lists about 0.30 cubic feet for a 40 lb bag, 0.45 for 60 lb and 0.60 for 80 lb, and Sakrete gives the same 0.6 cubic feet for its 80 lb bag. Those yields are for mixed concrete, so a cubic yard (27 cubic feet) takes 45 bags of 80 lb or 60 bags of 60 lb. Kilogram bags sold outside the US are scaled from the 80 lb figure by weight, roughly 11.7 litres per 25 kg bag; the yield printed on your bag wins if it differs.
Ready-mix plants batch by the cubic yard or cubic metre and many dispatch in quarter-yard steps, so the calculator rounds up to an increment you can change. Small loads often carry a short-load fee, which is why a 1.4 yard patio can cost nearly as much as a 3 yard one. Normal-weight concrete weighs about 150 lb per cubic foot (2,400 kg per cubic metre), which matters if you are hauling bags in a car or checking a trailer limit.
Common use cases
Patios, sheds and hot-tub pads
Size a slab and see whether 60-odd bags or one short ready-mix load makes more sense for the job.
Fence and deck posts
Multiply one hole by the number of posts to buy the right pallet quantity in one trip.
Footings and piers
Price square pads and round sonotube piers for a deck or small extension before calling the plant.
Curbs, edging and steps
Handle the awkward L-shaped curb and gutter section and stacked steps without sketching volumes by hand.
Tips and limitations
- Sit slabs on a compacted hardcore sub-base (often about 100 mm of MOT Type 1) so the concrete thickness is even and the volume estimate holds.
- Ready-mix suppliers sell BS 8500 designated and standardised prescribed mixes by name. Heidelberg Materials lists GEN1 for unreinforced domestic foundations, kerbing and haunching, PAV1 for house driveways, external paving and patios, and ST3 or ST4 for shed and workshop bases.
- A 25 kg sack is heavy to lift repeatedly; HSE manual handling guidance suggests reducing the load or getting help, so ask for bags to be delivered close to where you mix.
- Paving more than 5 m² of a front garden in England with impermeable concrete needs planning permission unless the water drains to a lawn or border.
Sources and further reading
- Permeable surfacing of front gardens: guidance, Ministry of Housing, Communities and Local Government. The 5 square metre rule for paving front gardens in England.
- Paving your front garden, Planning Portal
- Manual handling at work, Health and Safety Executive. Guidance on lifting heavy loads such as 25 kg bags.
- Types of concrete, Heidelberg Materials UK. Applications of the GEN1, PAV1, ST3 and ST4 mixes, including shed and workshop bases under ST3 and ST4.
Frequently asked questions
How many 25 kg bags of concrete make a cubic metre?
About 86. The calculator uses a yield of roughly 11.7 litres per 25 kg bag, scaled by weight from the manufacturer yield of standard mix, so 1 m³ needs 85.4 bags, rounded up to 86. Rapid-set and lightweight mixes yield differently, so check the sack.
How much concrete do I need for a 3 m by 3 m patio base?
At 100 mm thick it is 0.9 m³. With 10% extra for an uneven sub-base that is 0.99 m³, which is 85 bags of 25 kg or 106 bags of 20 kg, or a 1 m³ ready-mix order.
Is ready-mixed concrete cheaper than bags?
Above about half a cubic metre it often is, once you count the time and effort of mixing dozens of sacks. Small loads may carry a part-load or short-load charge, and volumetric lorries that mix on site charge for what you use. Put your quote and the bag price into the cost panel to compare.
How thick should a concrete shed base be?
For a garden shed, 100 mm of concrete on about 100 mm of compacted hardcore is the usual guidance from shed makers. Heavier buildings, garages and driveways need thicker slabs and sometimes reinforcement mesh, so follow the building or manufacturer specification.
Why does the calculator add extra concrete?
Excavations are rarely exactly to size and some concrete is lost in the mixer and the barrow. Adding 5% for formed slabs and 10% for dug holes avoids running short halfway through a pour, which leaves a cold joint.
Is there an in-depth guide to the Concrete Calculator?
Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.