United Kingdom version. Starts in metres, shows m² and sq ft together as UK floor plans and EPCs do, and prices flooring per m² in pounds. US version
Square Footage and Square Metre Calculator (UK)
Add up rooms in metres or feet and get square metres and square feet side by side, to compare an EPC or floor plan with a listing, or to price flooring per m².
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Square Footage Calculator?
UK property is described in two units at once. Estate agent floor plans usually print both square feet and square metres, while the Energy Performance Certificate for the same home gives its total floor area in square metres only. When the two disagree, the reason is often what was measured rather than an error, so it helps to add the rooms up yourself.
Measure each room in metres, add it as a rectangle or an L-shape, and the tool totals the floor in m² and ft². A three-bedroom semi with a 4.2 by 3.6 m lounge, a 5.1 by 3.0 m kitchen-diner, a hall, three bedrooms and a bathroom comes to about 66.7 m², or 718 sq ft.
For flooring, switch the price to per m² because UK merchants sell laminate, LVT and carpet by the square metre, and add the cutting allowance the fitter recommends.
- Five shapes per section: rectangle, L-shape, circle, triangle and trapezoid
- Unlimited add and subtract rows (up to 20) with a running area per row
- Results in ft², m², yd², in², acres and hectares at once
- Cost by ft², yd² or m² with an optional waste percentage
- Shareable link that reopens every section exactly as entered
Updated
How to use the Square Footage Calculator
- Leave the measurements in metres; switch to feet only if your plan is imperial.
- Add one section per room. Use an L-shape for a kitchen-diner or a through lounge with a step in the wall.
- Set a section to subtract for anything that will not be covered, such as a built-in wardrobe or a chimney breast.
- Read the total in m² and sq ft, then set the price per m² and a waste allowance for a flooring quote.
Worked examples
Checking a listing against the floor plan
Input
Seven rooms: 4.2 x 3.6, 5.1 x 3.0, 1.8 x 2.1, 3.9 x 3.4, 3.3 x 2.9, 2.6 x 2.2 and 2.1 x 1.9 m
Output
66.74 m² = 718.38 sq ft
Room-by-room totals miss the walls, stairs and landing, so they come out below a gross internal figure on an EPC. If a listing claims 800 sq ft for this house, ask what it includes.
LVT for an L-shaped kitchen-diner
Input
L-shape 5.4 x 3.2 m plus 2.4 x 2.0 m, 10% extra, £28 per m²
Output
22.08 m²; 24.29 m² to buy; about £680.06
Flooring packs are sold by the m² they cover, so divide 24.29 by the pack size and round up. Herringbone layouts need more than 10%.
A 65 m² flat in square feet
Input
Area 65 m²
Output
699.65 sq ft
One square metre is 10.764 sq ft. The conversion helps when one listing quotes m² from the EPC and another quotes sq ft from a floor plan.
Background and insight
Square footage is a measure of area: length times width for a rectangle. The trap is the unit change. A square foot is 0.09290304 square metres exactly, because the international foot has been defined as 0.3048 m since 1959, but a square yard is 9 square feet, not 3, and an acre is 43,560 square feet. Converting a length and then squaring is safe; converting an area by the length factor is the error that produces a quote three times too small.
Splitting irregular shapes into rectangles and triangles is the same method surveyors use for plan areas, and it is exact as long as the pieces do not overlap. When they do, subtract the overlap or measure the pieces differently. For a home appraisal or listing, the gross living area follows local or ANSI Z765 rules about walls, stairs and ceiling height, which this calculator does not apply; it measures whatever you describe.
Common use cases
Flooring and carpet
Measure every room and closet as separate sections, subtract fixed cabinets, and price the total with a waste allowance.
Painting and wall coverings
Treat each wall as a rectangle and subtract windows and doors to estimate paint or wallpaper coverage.
Sod, seed and landscaping
Combine curved beds (circles and trapezoids) and lawns, then convert to square yards or acres for supplier quotes.
Rent and real-estate checks
Sanity-check a listed square footage or compare price per square foot between properties.
Tips and limitations
- An EPC states total floor area in m²; the certificate is free to look up on the government register by postcode.
- Measure wall to wall at skirting level and round to the nearest centimetre; small errors multiply across a whole house.
- In rooms with sloping ceilings, note how much of the floor has full head height; a total area alone does not tell you how usable a loft room is.
Sources and further reading
- Find an energy certificate, GOV.UK. EPCs for homes in England, Wales and Northern Ireland, showing total floor area in m².
- Energy Performance Certificates for your home, GOV.UK
- Weights and Measures Act 1985, Schedule 1, legislation.gov.uk. Lists the units of measurement, including the square metre and square foot.
Frequently asked questions
Why does the floor area on my EPC differ from the estate agent plan?
They measure different things. An EPC assessor records the total floor area used for the energy model, while agent plans are drawn by different firms with their own conventions and often carry a disclaimer. Adding up your own room sizes gives a third, usually smaller, figure because walls, stairs and landings are left out.
Do UK estate agents use square feet or square metres?
Most floor plans show both, and many agents quote sq ft in the headline. New-build developers and EPCs use m². The calculator shows both so you can compare like with like.
How many square feet is a 3 by 4 metre bedroom?
A 3 by 4 m room is 12 m², which is 129.17 sq ft. Multiply square metres by 10.764 to get square feet.
How do I work out flooring for a room in square metres?
Multiply length by width in metres, add sections for alcoves and bays, then add about 10% for cuts on a straight lay. Divide by the m² per pack printed on the box and round up to whole packs.
Is the price per square foot useful for UK houses?
It is a rough comparison between similar homes on the same street. It ignores garden size, parking and condition, and the floor areas behind it are often measured differently, so treat it as a starting point.
Is there an in-depth guide to the Square Footage Calculator?
Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.