United Kingdom version. Metric by default, with litres and UK (imperial) gallons, chlorine doses in grams and millilitres per 10,000 L, and the UK rules on filling a pool during a hosepipe ban. US version

Pool Volume Calculator (Litres and Imperial Gallons)

How many litres or imperial gallons your frame pool, hot tub or in-ground pool holds, with chlorine granules, liquid chlorine and salt dosed per 10,000 litres.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Pool Volume Calculator?

Frame pools, inflatable pools and hot tubs have their chemicals labelled in grams or millilitres per 10,000 litres. This version works in metres and litres and also shows UK (imperial) gallons alongside. A 12 ft (3.66 m) round frame pool filled to 0.9 m holds 9,469 litres, which is 2,083 UK gallons but 2,501 US gallons, so reading the UK gallon figure against a US chart would underdose it by about a sixth.

Enter the shape and the water depth, not the wall height. The tool gives the volume, the dose of your chlorine product for the rise in free chlorine you want, the salt for a salt-water system, and how long the hose will take. Filling or maintaining a domestic pool is one of the uses a water company can ban during a drought.

  • Rectangle, round, ellipse, straight-sided oval, kidney and free-form shapes
  • Sloping floors from shallow and deep depths
  • US gallons, litres, cubic metres and imperial gallons at once
  • Chlorine dose for liquid, bleach, cal-hypo, dichlor and trichlor, with CYA and calcium side effects
  • Salt dose and fill time; everything runs in the browser
Read the guide: Pool Volume and Chlorine Dosing: Gallons, ppm and Salt

Updated

How to use the Pool Volume Calculator

  1. Keep the units on metric and pick the shape. Frame and inflatable pools are usually round or rectangular; measure the inside diameter.
  2. Enter the water depth. For a pool with a flat floor, put the same figure in both depth boxes.
  3. Choose your chlorine product: dichlor granules (56%) and trichlor tablets (90%) are the common UK products; liquid chlorine and calcium hypochlorite also appear.
  4. Set how far you want to raise free chlorine in ppm (1 ppm is 1 mg per litre). The hint shows the dose per 10,000 L for the product you picked.
  5. For a salt-water system, enter the salt reading now and the target from the chlorinator manual, and the salt bag size you buy.

Worked examples

12 ft round frame pool, 0.9 m of water

Input

Round, 3.66 m diameter, 0.9 m deep, raise free chlorine by 2 ppm with dichlor 56%

Output

9,469 L (2,083 UK gallons); 34 g of dichlor granules

Dichlor at 56% needs 18 g per 10,000 L for each 1 ppm. Each dose also adds about 1.8 ppm of cyanuric acid (stabiliser) per 2 ppm of chlorine, so a pool kept on granules all summer builds up stabiliser.

Round hot tub, 1.8 m across and 0.7 m deep

Input

Round, 1.8 m diameter, 0.7 m water depth, raise free chlorine by 3 ppm with dichlor 56%

Output

1,781 L (392 UK gallons); 10 g of dichlor

Hot tubs are small, so weigh doses rather than guessing a scoop. The volume of a moulded tub is less than the cylinder because of the seats; the manufacturer's stated litres beat any measurement.

Rectangular frame pool on a salt system

Input

Rectangle 5.49 x 3.05 m, 1.07 m deep, salt 0 to 3,000 ppm, 25 kg bags

Output

17,917 L (3,941 UK gallons); 53.7 kg of salt, three 25 kg bags

Salt in kg is ppm x litres / 1,000,000. Add it in stages and test, since the cell manual gives a range and pool salt bags vary between suppliers.

Background and insight

Volume is surface area times average depth. For a pool whose floor slopes evenly from the shallow end to the deep end, the average depth is the mean of the two. Hopper-bottom pools with a steep drop into a small deep area hold less than that average suggests, so treat the result as an upper bound for them. One cubic foot holds 7.4805 US gallons and one cubic metre is 1,000 litres.

Ovals come in two kinds. A true ellipse has area pi / 4 x length x width, which is where the trade shortcut of length x width x depth x 5.9 gallons comes from. Many above-ground "oval" pools are really straight-sided with round ends, which hold more; choose that shape for them. Kidney pools use the trade rule of thumb 0.45 x (width at one end + width at the other) x length, which is an approximation.

Chlorine dose is chemistry, not a chart. One part per million is one milligram per litre, so raising 10,000 US gallons (37,854 litres) by 1 ppm takes 37.9 grams of available chlorine. Liquid chlorine sold at 12.5 trade percent holds 125 grams of available chlorine per litre, which works out to about 10.2 fluid ounces. Cal-hypo at 65% needs about 2 ounces by weight. The side effects follow molar ratios: every 1 ppm of chlorine from trichlor adds about 0.6 ppm of cyanuric acid, from dichlor about 0.9 ppm, and from cal-hypo about 0.7 ppm of calcium hardness.

Common use cases

  • Opening and shocking

    Dose chlorine by the ppm you need instead of by a bottle label written for a different pool size.

  • Salt cell start-up

    Work out how many bags of salt bring the water to the chlorinator range.

  • Buying a pump or heater

    Pumps are sized by turnover time and heaters by volume, so both start from gallons.

  • Filling or topping up

    Estimate how long the hose needs to run and what the water bill will cover.

Tips and limitations

  • Check for a temporary use ban before filling: water companies can ban filling or maintaining a domestic swimming or paddling pool, however the water is supplied.
  • A frame pool loses depth as it is used, so re-measure the water level before dosing late in the season.
  • Never mix dry chlorine products or add water to the chemical; always add the chemical to plenty of water.

Sources and further reading

  1. Water Industry Act 1991, section 76: temporary bans, legislation.gov.uk. Filling or maintaining a domestic swimming or paddling pool is a use a water company may ban.
  2. Hosepipe bans and non-essential use bans: what they mean for you, Ofwat. How temporary use bans work and what they cover.
  3. The control of legionella and other infectious agents in spa-pool systems (HSG282), Health and Safety Executive. Water treatment and testing for spa pools and hot tubs.
  4. Health and safety in swimming pools (HSG179), Health and Safety Executive

Frequently asked questions

How many litres are in my frame pool?

For a round pool, litres = 3.1416 x diameter² / 4 x water depth x 1,000, with sizes in metres. A 3.66 m (12 ft) pool at 0.9 m holds 9,469 L; a 4.57 m (15 ft) pool at 1.2 m holds about 19,700 L. Use the water depth, which is usually a little below the top rail.

How do I convert pool litres to UK gallons?

Divide by 4.546, the litres in one imperial gallon. US gallons are smaller (3.785 L), so a figure in US gallons is about 20% higher than the same pool in UK gallons. Many US websites and imported pump manuals use US gallons.

Can I fill my pool during a hosepipe ban?

Not if your water company's temporary use ban includes it: section 76(2)(e) of the Water Industry Act 1991 covers filling or maintaining a domestic swimming or paddling pool however the water is supplied. Your water company publishes the details of its ban, including any exceptions.

How much chlorine granules per 10,000 litres?

For dichlor at 56% available chlorine, 18 g raises 10,000 L by 1 ppm. A 2 ppm rise in a 9,500 L pool is about 34 g. Check the strength printed on your tub and enter a different product if it does not match.

How much salt does my pool need?

Salt (kg) = (target ppm minus current ppm) x litres / 1,000,000. Taking 17,900 L from fresh water to 3,000 ppm needs 53.7 kg. Use the target your chlorinator manual gives, and test before topping up.

Do hot tubs need different treatment from pools?

They run warmer and with more bathers per litre, so they are usually kept at a higher sanitiser level and checked more often. HSE guidance on spa pools (HSG282) covers commercial tubs and the legionella risk; for a home tub, follow the manufacturer's handbook.

Is there an in-depth guide to the Pool Volume Calculator?

Yes. “Pool Volume and Chlorine Dosing: Gallons, ppm and Salt” covers the background, how it works, common pitfalls and worked examples. Read the full guide.