Minutes to Hours Converter
Convert minutes to hours as a clean decimal for timesheets and invoices, so 90 minutes reads 1.5 hours and 7 hours 45 minutes bills as 7.75, never 7.45.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Minutes to Hours Converter?
Payroll systems, invoices and project trackers all want hours as a decimal, while clocks and phone timers hand you minutes. Type the minutes here and the Hour row gives the decimal directly: 90 minutes is 1.5 hours, 45 minutes is 0.75, a full 480 minute workday is 8. Seconds, days and weeks appear in the same table for the occasional oddball duration.
The conversion is a single exact division by 60, but it is the division people get wrong on money documents. Writing 7 hours 45 minutes as 7.45 underbills by 18 minutes, because 45 minutes is 0.75 of an hour, not 0.45. This page exists to make that step visible: the working shows the division, and the examples below cover the values that cause the mistakes.
As with every converter on this site, the math runs in your browser and your entries are never transmitted. The steps panel cites the definition it divides by rather than a shortcut, and the report bar can hand the table over as a CSV or PDF or as a link that restores the same minutes for a colleague.
- Minutes to decimal hours both ways with the exact 60 minute definition
- Quick values for 90, 45, 150 and 480 minutes
- Seconds, days and weeks derived from the same entry
- Adjustable precision for invoice-friendly rounding
- Computed locally with CSV, PDF and share-link export in the report bar
Updated
How to use the Minutes to Hours Converter
- Enter the minutes, or tap a quick value: 90, 45, 150 or 480.
- Read the Hour row for the decimal hours; seconds, days and weeks follow underneath.
- To go from decimal hours back to minutes, set the From unit to Hour and type the decimal.
- Open the Hour row to see the working: your minutes divided by the exact 60 minute definition.
- Pick a precision for invoices, then export CSV or PDF or copy the share link from the report bar.
Worked examples
An hour and a half
Input
90 min
Output
1.5 h
90 / 60 = 1.5 exactly. On a timesheet the same stretch is 1:30, and the decimal form is the one the pay calculation multiplies by the hourly rate.
Three quarters of an hour
Input
45 min
Output
0.75 h
The value behind the classic error: a day of 7 hours 45 minutes is 7 + 0.75 = 7.75 decimal hours. Writing 7.45 instead drops 0.3 hours, 18 minutes, from every such day.
A standard workday
Input
480 min
Output
8 h
Eight hours is 480 minutes, so a tracker that logged 492 minutes shows 8.2 hours: the extra 12 minutes are 0.2 of an hour because 12 / 60 = 0.2.
A big backlog of minutes
Input
1,000 min
Output
16.666667 h
Divisions that do not land on a multiple of 3 minutes repeat forever; 1,000 / 60 = 16.6 recurring. For an invoice, round to two decimals (16.67 h) and say so.
Background and insight
Sixty minutes to the hour is one of the oldest conventions still in daily use. Babylonian astronomers worked in base 60, Greek astronomers carried the system into dividing angles and hours, and the Latin names stuck: pars minuta prima, the first small part, became the minute, and pars minuta secunda became the second. Base 60 survived because it divides cleanly by 2, 3, 4, 5, 6, 10, 12 and 15, which is exactly what scheduling needs.
In modern measurement the second is the SI base unit, and the minute (60 s), hour (3,600 s) and day (86,400 s) are non-SI units formally accepted for use with the SI. Those fixed ratios are what this converter divides by, so 1 minute is exactly 1/60 hour, about 0.016667, and 1,440 minutes make a day. The Year row uses the Julian year of 365.25 days, the astronomy convention, so it reads as an average rather than any particular calendar year.
Decimal hours rule paperwork because rates multiply: 7.75 hours at $40 is one keystroke, 7:45 at $40 is not. Payroll commonly rounds to quarter hours, 0.25 steps of 15 minutes, while law firms bill in tenths, 0.1 hour units of 6 minutes each, so a 4 minute email becomes 0.1 billable hours. Minutes that are not multiples of 3 produce repeating decimals, 50 minutes is 0.8333..., which is why timesheet software stores minutes and only displays the decimal.
Common use cases
Timesheets and payroll
Turn clocked minutes into the decimal hours that wage systems multiply by the pay rate.
Freelance invoices
Convert tracked minutes per client into billable hours, including tenth-of-an-hour billing increments.
Project estimates
Roll task estimates in minutes up into hour totals for plans and quotes.
Training and media time
Express a 150 minute course or film as 2.5 hours for schedules and listings.
Tips and limitations
- Read the colon as a warning: 7:45 means 7 hours 45 minutes, which is 7.75 decimal hours. The digits after a colon are minutes out of 60, never a decimal.
- One billing tenth is 6 minutes, one hundredth of an hour is 36 seconds, and a quarter is 15 minutes; pick the increment before converting, not after.
- Minutes that are multiples of 3 give terminating decimals (27 min = 0.45 h); anything else repeats, so agree on a rounding rule for invoices.
- In Excel and Google Sheets a time cell holds a fraction of a day; multiply it by 24, not 60, to get decimal hours from 7:45.
- Going back the other way, multiply decimal hours by 60: 0.85 h is 51 minutes, which the converter shows when you flip the From unit to Hour.
Sources and further reading
- NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Minute, hour and day as non-SI units accepted for use with the SI
- Hour, Wikipedia. The hour's history and its fixed 3,600 second definition
- Minute, Wikipedia. Pars minuta prima and the sexagesimal division of the hour
Frequently asked questions
How many hours is 90 minutes?
1.5 hours, since 90 / 60 = 1.5. Spoken as a clock duration it is 1:30, an hour and a half; as decimal hours for a rate calculation it is 1.5.
Is 7:45 on a timesheet the same as 7.45 hours?
No, and the gap costs money. 7:45 is 7 hours 45 minutes, which converts to 7.75 decimal hours because 45 / 60 = 0.75. Writing 7.45 shortchanges the entry by 18 minutes, roughly 1.2 percent of a week if repeated daily.
How many minutes is 0.1 of an hour?
Six minutes. Law firms and consultancies that bill in tenths count every started 6 minute block as 0.1 hours, so a 4 minute call bills as 0.1 and a 13 minute one as 0.3 under the usual round-up convention.
How many hours is 1,000 minutes?
16.67 hours, exactly 16 hours 40 minutes. The decimal repeats (16.666...) because 1,000 is not divisible by 60, so pick a rounding precision before putting it on paper.
How do I convert decimal hours back to minutes?
Multiply by 60. 0.75 hours is 45 minutes and 2.2 hours is 132 minutes. In the converter, set the From unit to Hour, enter the decimal and read the Minute row.
Why are there 60 minutes in an hour?
The division is inherited from Babylonian base-60 arithmetic, which Greek astronomers applied to hours and angles. Sixty splits evenly by 2, 3, 4, 5, 6, 10, 12 and 15, so common fractions of an hour stay whole minutes. Today the ratio is fixed by definition: 1 hour is exactly 3,600 seconds.
Is there an in-depth guide to the Minutes to Hours Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.