United Kingdom version. Metres and litres by default, with the 10, 5, 2.5 and 1 litre tins sold in the UK, coverage in square metres per litre and UK guidance on VOC labels and older textured ceilings. US version

Paint Calculator (UK)

Work out how many litres of emulsion a room needs from its size in metres, coats and the coverage on the tin, then the 10, 5, 2.5 and 1 litre tins to buy.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Paint Calculator?

Emulsion in the UK is sold in 2.5, 5 and 10 litre tins, with 1 litre tins for testing colours and small jobs, and the coverage on the label is given in square metres per litre. This version starts in metric and works out the cheapest-looking combination of those tins for the wall and ceiling area you enter.

Take a living room of 4 by 3.5 metres with 2.4 metre walls, one door and a 2.2 square metre window. That leaves 31.9 square metres of wall. Two coats at 12 square metres per litre need 5.32 litres, so a 5 litre tin is not quite enough and the tool adds a 1 litre tin rather than a second 2.5.

Add the ceiling and the job grows to 7.65 litres. Ceilings are usually painted in a separate white, so the calculator shows wall paint and ceiling paint separately to help you buy two products rather than one.

  • Walls, ceiling or both, with doors, windows and other areas subtracted
  • Separate coat counts for walls and ceiling, plus optional primer
  • Shopping list in 5 gallon, 1 gallon and quart sizes, or 10, 5, 2.5 and 1 litre tins
  • Imperial and metric inputs that convert when you switch
  • Cost from your own can prices, copy and share link, all in the browser
Read the guide: How Much Paint Do I Need? Coverage, Coats and Cans

Updated

How to use the Paint Calculator

  1. Leave the units on metric and measure the room in metres. The wall height is floor to ceiling, skirting included.
  2. Enter doors at about 1.9 m² each (a 762 by 1981 mm internal door is 1.5 m², a wider door with frame nearer 1.9) and the window sizes you measure.
  3. Set the coats: two for a new colour, often one for a ceiling white over white.
  4. Copy the coverage from the tin. If it says up to 12 m² per litre, enter 12; rough or porous walls get less.
  5. Keep the 10, 5, 2.5 and 1 litre tin range and enter your own tin prices to see the cost.

Worked examples

Living room walls, 4 m x 3.5 m

Input

2.4 m walls, 1 door (1.9 m²), 1 window (2.2 m²), 2 coats, 12 m²/L

Output

31.9 m² of wall; 5.32 L; buy a 5 L and a 1 L tin

The walls are 36 m² gross before the 4.1 m² of openings come off. A single 5 litre tin would leave you a third of a litre short on the second coat.

Same room with the ceiling

Input

Walls and ceiling, 2 coats each, 12 m²/L

Output

45.9 m² painted; 7.65 L (5.32 walls, 2.33 ceiling)

Bought as one colour it is a 5, a 2.5 and a 1 litre tin. In practice you would buy the 2.33 litres of ceiling white as a separate 2.5 litre tin.

Three bedrooms the same size

Input

3 rooms of 3.5 m x 3 m, 2.4 m walls, 1 door and a 1.44 m² window each, 2 coats, 12 m²/L

Output

83.6 m² of wall; 13.93 L; buy 10 L + 2.5 L + 2 x 1 L

The tool picks the least paint that covers the job. A 10 and a 5 litre tin give 15 litres in two tins instead of four, which may cost less per litre, so compare with your prices.

Newly plastered bedroom

Input

3.5 m x 3 m, walls and ceiling, 1 primer or mist coat at 10 m²/L, then 2 coats at 12 m²/L

Output

38.4 m² painted; 6.39 L of emulsion and 3.84 L for the first coat

Bare plaster soaks up the first coat. Whether that coat is a diluted emulsion or a primer depends on the paint maker, so follow the instructions on the tin.

Background and insight

Coverage is the number that matters most and the one people skip. Manufacturers state a spreading rate for one coat at the film thickness the paint is designed for, usually on a smooth, sealed surface. Rough or porous surfaces, bare drywall, fresh plaster and textured ceilings soak up more, so the real figure can fall to 250 square feet per gallon or lower. Big colour changes, especially light over dark, often need a third coat or a tinted primer. That is why the calculator lets you choose a surface preset or type the figure from your can.

Openings are subtracted by area. A standard interior door of 3 by 7 feet is 21 square feet and a 3 by 5 foot window is 15 square feet, which are the defaults. Painters often ignore small windows because cutting in around them uses nearly as much paint as the glass would have taken; subtracting them gives the leanest honest estimate, and the extra percentage puts some back.

Two coats are the norm for new colour on walls. The first coat hides most of the old colour and evens out porosity; the second gives the uniform sheen and colour the manufacturer tested. Ceilings in flat white over the same white are often fine with one coat.

Common use cases

  • Repainting a room

    Check whether one gallon is enough or you need two before driving to the store, and avoid opening a second batch mid-wall.

  • New drywall

    Add a primer coat with its own coverage figure so the primer and finish paint are bought together.

  • Whole-house quotes

    Price several identical bedrooms at once and compare 5 gallon buckets against single gallons.

  • Ceilings only

    Estimate ceiling white for a whole floor, where one coat over the same colour is often enough.

Tips and limitations

  • Check the VOC content on the tin. UK rules set maximum VOC levels for decorative paints, and water-based emulsions are low.
  • Textured ceilings applied years ago can contain asbestos. HSE advises not to sand or scrape them; paint over them or get them tested.
  • Box your tins: pour all the tins of one colour into a bucket and mix, so the shade is the same on every wall.
  • Use a stable stepladder or a hop-up for ceilings rather than standing on furniture.

Sources and further reading

  1. The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012, legislation.gov.uk. VOC limits and labelling for decorative paints sold in the UK.
  2. Asbestos, Health and Safety Executive. Where asbestos is found in older buildings, including textured coatings.
  3. Ladders and stepladders, Health and Safety Executive

Frequently asked questions

How many litres of paint do I need for a room in the UK?

For a typical 4 by 3.5 metre living room with 2.4 metre walls, about 5.3 litres for two coats on the walls at 12 m² per litre, and around 7.7 litres with the ceiling. Measure your own room, because a large bay window or chimney breast changes the area.

How far does a 2.5 litre tin of emulsion go?

At 12 m² per litre it covers 30 m² for one coat, or 15 m² for two. That is enough for the walls of a small bathroom or a single feature wall, not usually a whole bedroom.

Is a 10 litre tin cheaper than two 5 litre tins?

Often per litre, but not always, and offers change the answer. Enter the price of each tin size and the calculator totals the combination it recommends. If you would use most of the larger tin, it is also one batch.

Do I need a mist coat on new plaster?

New plaster needs to be fully dry before painting, and its first coat soaks in. Many emulsions say to thin the first coat for new plaster; others are sold as contract matt for bare plaster. Follow the instructions on your tin and add that coat as a primer coat in the calculator.

What does the VOC label on a paint tin mean?

It shows how much volatile organic compound the paint contains. The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012 set maximum limits for each type of decorative coating and require the content to be labelled.

Can I paint over an Artex ceiling?

Painting over a sound textured ceiling is generally the lower-risk option. Older textured coatings can contain asbestos, so HSE guidance is not to sand, scrape or drill them without knowing what they contain.

Is there an in-depth guide to the Paint Calculator?

Yes. “How Much Paint Do I Need? Coverage, Coats and Cans” covers the background, how it works, common pitfalls and worked examples. Read the full guide.