Metric Prefix Converter
Convert a value between SI prefixes from quecto (10⁻³⁰) to quetta (10³⁰), including the 2022 additions, with the power-of-ten arithmetic written out.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Metric Prefix Converter?
Enter a number under one SI prefix and read it under all the others at once, from quecto at 10⁻³⁰ up to quetta at 10³⁰. Pick a target prefix and the converter shows the power-of-ten arithmetic: 750 nano becomes 750 × 10⁻⁹ ÷ 10⁻⁶ = 0.75 micro, with both exponents named.
Prefixes are pure multipliers, so the conversion is the same whether the quantity is metres, farads, grams or bytes in their decimal sense. That is also why the mistakes are so uniform: slipping one rung on the ladder changes a result by a factor of 1,000, and mixing up milli and micro, or assuming kilo means 1,024, are among the most common unit errors in engineering notes and lab books.
The converter runs in your browser and never sends your value anywhere. The working lists the exact exponent of each prefix as the SI Brochure defines it, the report bar underneath exports the full ladder as CSV or PDF, and the share link restores the same input for anyone who opens it.
- One value shown under the full decimal prefix ladder at once, quecto to quetta
- Exponent-by-exponent working for any chosen target prefix
- Covers the 2022 CGPM additions quetta and quecto at the extremes
- CSV and PDF export of the ladder from the report bar
- Runs entirely in the browser with a shareable link; no value is uploaded
Updated
How to use the Metric Prefix Converter
- Type the numeric value you want to re-express.
- Choose the prefix it currently carries, or "one" for a bare number.
- Read the value under every other prefix in the table at once.
- Select a target prefix to see the exponent arithmetic written out.
- Export the ladder as CSV or PDF from the report bar, or copy the share link.
Worked examples
Nano to micro
Input
750 nano
Output
0.75 micro
Nano is 10⁻⁹ and micro is 10⁻⁶, so the value moves three decimal places: 750 × 10⁻⁹ = 0.75 × 10⁻⁶. Capacitor markings switch between nF and µF at exactly this boundary.
Tera down the ladder
Input
3.6 tera
Output
3,600 giga = 3,600,000 mega
Each step down from tera (10¹²) to giga (10⁹) to mega (10⁶) multiplies the number by 1,000. The quantity itself never changes, only the notation.
Centi to milli
Input
5 centi
Output
50 milli
Centi is 10⁻² and milli is 10⁻³, one of the few single-decade steps on the ladder, so the number grows by a factor of 10: 5 cm is 50 mm.
The 2022 top of the scale
Input
1 quetta
Output
1,000,000 yotta = 10²⁷ kilo
Quetta is 10³⁰, six orders of magnitude above yotta at 10²⁴ and twenty-seven above kilo. It was added by the CGPM in 2022 as the new largest SI prefix.
Background and insight
The SI prefix ladder began with the metric system in the 1790s, when the original set ran only from milli (10⁻³) to myria (10⁴), a prefix long since dropped. Growth came in bursts: micro and mega in 1873 and the SI's founding set in 1960, femto and atto in 1964, peta and exa in 1975, and zetta, yotta, zepto and yocto in 1991. Above kilo every step is a factor of 1,000 and the capital-letter symbols mark the multipliers from mega upward, while k stays lowercase.
In November 2022 the 27th CGPM added the first new prefixes in over thirty years: ronna (10²⁷) and quetta (10³⁰) at the top, ronto (10⁻²⁷) and quecto (10⁻³⁰) at the bottom. The push came partly from data science, where global storage was heading past the yottabyte, and partly to pre-empt unofficial names from filling the gap. The new names give convenient sizes for extreme quantities: Earth's mass is about 5.97 ronnagrams and an electron's is about 0.9 rontograms.
One oddity of the system is that the base unit of mass, the kilogram, already carries a prefix, so prefixes attach to the gram instead: a milligram, never a microkilogram. Another is the collision with binary sizes in computing. SI kilo is exactly 1,000, and the IEC binary prefixes kibi (1,024), mebi and gibi exist precisely so that disks and memory can be described without ambiguity. This converter handles the decimal ladder; the data storage converter handles the binary one.
Common use cases
Electronics values
Move capacitor, resistor and inductor values between pico, nano, micro and milli without counting zeros by hand.
Lab and chemistry notes
Re-express concentrations and sample masses between milli, micro and nano scales for protocols and dilutions.
Data and science writing
Check that tera, peta and exa figures in an article are consistent when restated in another prefix.
Teaching powers of ten
Show students the whole ladder for one value at once, including the 2022 additions at the extremes.
Tips and limitations
- Prefix symbols are case-sensitive: M is mega (10⁶) and m is milli (10⁻³), a factor of a billion apart.
- In SI, kilo is exactly 1,000. Binary 1,024-based sizes use the IEC prefixes kibi, mebi and gibi instead.
- Attach prefixes to the gram, not the kilogram: the mass unit already carries one, so 10⁻⁶ kg is written 1 mg.
- The micro symbol is µ (mu); when it is unavailable, "u" is a common plain-text stand-in, as in uF.
- Above kilo and below milli the ladder moves in steps of 1,000, so each rung shifts the decimal point three places.
Sources and further reading
- The International System of Units (SI Brochure), BIPM. The authoritative list of SI prefixes and their symbols
- Metric prefix, Wikipedia. History of the ladder and the 2022 ronna, quetta, ronto and quecto additions
- NIST Special Publication 811: Guide for the Use of the International System of Units, NIST. Rules for prefix usage, symbols and the gram exception
Frequently asked questions
What are the newest SI prefixes?
In November 2022 the 27th CGPM adopted ronna (10²⁷) and quetta (10³⁰) for large numbers and ronto (10⁻²⁷) and quecto (10⁻³⁰) for small ones, the first additions since 1991. This converter includes quetta and quecto at the ends of its ladder.
Why were quetta and quecto added?
Mainly because global data volumes were approaching the limit of yotta (10²⁴), and metrologists wanted official names before informal ones took hold. They also give tidy sizes for physical extremes: Earth's mass is about 5.97 ronnagrams.
Is kilo 1,000 or 1,024?
In the SI, kilo is exactly 1,000, always. The 1,024-based sizes used for memory have their own IEC prefixes: kibi, mebi and gibi. A 1 TB drive holds 10¹² bytes, which is about 0.909 TiB.
How do I convert between two prefixes?
Subtract the exponents and shift the decimal point by the difference. From nano (10⁻⁹) to micro (10⁻⁶) the difference is 3, so divide the number by 1,000. The working panel shows this subtraction for your chosen pair.
Why do prefixes attach to the gram and not the kilogram?
The kilogram is the only SI base unit whose name already contains a prefix, a leftover of the system's history. To avoid double prefixes, multiples of mass are built on the gram: milligram and microgram, never microkilogram.
Are hecto, deca and deci still used?
They are valid SI prefixes but rare outside a few niches such as the hectopascal in meteorology and the decilitre in medicine. This converter focuses on the thousands ladder plus centi, which covers the prefixes used in engineering practice.
What does the µ symbol mean?
It is the Greek letter mu, the symbol for micro, 10⁻⁶. Because µ is awkward to type, datasheets often write u instead, so a 4.7 uF capacitor is 4.7 µF, which is 4,700 nF.
Is there an in-depth guide to the Metric Prefix Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.