Power Converter
Convert power between watts, kW, mechanical and metric horsepower, BTU/h and tons of refrigeration, with exact factors like 1 hp = 745.6999 W.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Power Converter?
Car brochures quote the same engine three ways: horsepower in the US, PS in Germany and Japan, kilowatts in Australia and on every EU type approval. Air conditioners are sold in BTU in one country and kW in the next, and large systems in tons. To check a spec sheet or compare two machines you need one scale, so this converter takes a single power figure and shows it in watts, kW, MW, both horsepowers, BTU per hour, tons of refrigeration and foot-pounds per second together.
Pick the unit you need and the steps lay out the exact chain: mechanical horsepower is 550 foot-pounds per second, which works out to 745.6998715822702 W through the exact foot and pound definitions, while the metric horsepower (PS) is 75 kgf·m/s, exactly 735.49875 W. The two differ by about 1.4%, enough to change a brochure number, and the table keeps them separate.
Your numbers stay on your machine; the whole conversion runs in the browser with nothing uploaded. The report bar beneath the result produces a CSV or PDF of the table, and the share link reopens the page with your value filled in.
- One figure shown in W, kW, MW, hp, PS, BTU/h, tons of refrigeration and ft·lbf/s together
- Worked steps for any target unit, exact factor through watts on every line
- Mechanical hp (745.6998716 W) and metric PS (735.49875 W) kept distinct
- Ton of refrigeration tied to its 12,000 BTU/h definition
- CSV and PDF report export plus a share link with the input preserved
Updated
How to use the Power Converter
- Enter the power figure, for example 100.
- Set its unit, such as kilowatts. Watts, megawatts, hp, PS, BTU/h, tons of refrigeration and ft·lbf/s all appear at once.
- Open any target unit to read the conversion steps with the exact factor through watts.
- Preset buttons cover common cases like 1 kW, 0.746 kW (one hp) and a 3.5 kW air conditioner.
- Use the report bar for CSV or PDF export, or copy the share link carrying your input.
Worked examples
A 100 kW electric motor in horsepower
Input
100 kW
Output
134.10 hp
100,000 W divided by 745.6998716 W per hp gives 134.10 hp, while dividing by 735.49875 gives 135.96 PS. The PS figure is always about 1.4% higher for the same machine.
A 300 hp engine in kilowatts
Input
300 hp
Output
223.71 kW
300 × 745.6998716 W = 223,709.96 W, so 223.71 kW, which is also 304.16 PS. This is the number an EU spec sheet would print for a US 300 hp rating.
A 3.5 kW air conditioner in BTU
Input
3.5 kW
Output
11,942 BTU/h
3,500 W × 3,600 s / 1,055.05585262 J per BTU = 11,942.5 BTU/h, just under one ton of refrigeration (0.995 TR). Units sold as 12,000 BTU are this size.
One ton of refrigeration in kW
Input
12,000 BTU/h
Output
3.5169 kW
12,000 BTU/h is exactly the defined ton of refrigeration: 3,516.85 W of heat removal. Chiller capacities quoted in tons multiply through this figure.
Background and insight
The watt, one joule per second, is the SI unit, named for the man whose marketing created its main rival. James Watt coined the horsepower in the 1780s to sell steam engines against horses, settling on 33,000 foot-pounds per minute, 550 per second. After 1959 fixed the foot and the pound, that definition pins mechanical horsepower at exactly 745.6998715822702 W.
Continental Europe translated the idea metrically as 75 kilogram-force meters per second, the Pferdestaerke or PS, exactly 735.49875 W under standard gravity. Because a PS is smaller than an hp, the same engine scores a higher PS number: 300 hp is 304.2 PS, and 300 PS is only 295.9 hp. Brochures have traded on that rounding for decades, and EU law now requires kW alongside.
Cooling has its own dialect. US air conditioners are rated in BTU per hour, usually shortened to BTU, and large plant in tons of refrigeration: the heat removed by melting one short ton of ice over 24 hours, standardized as 12,000 BTU/h or 3,516.85 W. A window unit marked 12,000 BTU is one ton of cooling, about 3.52 kW of heat moved, not of electricity drawn.
Common use cases
Engine specs across markets
Reconcile hp, PS and kW figures for the same car in US, European and Japanese brochures.
HVAC sizing
Compare air conditioners rated in BTU with heat pumps rated in kW, and chillers quoted in tons.
Electrical planning
Convert motor horsepower ratings to kW when sizing circuits, generators or solar systems.
Workshop and marine gear
Match outboard, compressor and pump ratings given in different units on used-equipment listings.
Tips and limitations
- Always check which horsepower a spec means: mechanical (745.70 W), metric PS (735.50 W) or electrical (746 W exactly, used for US motor nameplates).
- An air conditioner BTU rating is heat moved per hour, not electricity consumed. A 12,000 BTU unit moves 3.52 kW of heat while drawing maybe 1 kW; the ratio is its efficiency.
- Power (kW) and energy (kWh) are different quantities. Multiply a power by its running time to get the energy a bill charges for.
- The quick factor 1 hp = 0.746 kW is fine for engines; keep the full 745.6998716 W when chaining conversions so errors do not stack.
- Boiler horsepower is yet another unit, about 9,810 W, used for steam plant. It is not in this table, so do not read a boiler spec as mechanical hp.
Sources and further reading
- NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Appendix B gives the horsepower variants and BTU/h in watts
- The International System of Units (SI Brochure), Bureau International des Poids et Mesures
- Horsepower, Wikipedia. Watt's original definition and the mechanical, metric, electrical and boiler variants
Frequently asked questions
How many watts is one horsepower?
Mechanical horsepower is 745.6998716 W, from its definition of 550 foot-pounds per second with the exact 1959 foot and pound. Metric horsepower (PS) is exactly 735.49875 W, and the electrical horsepower used on US motor nameplates is exactly 746 W.
Why does the same engine show more PS than hp?
Because the PS is the smaller unit. PS, the metric horsepower, is defined as 75 kgf·m/s (735.49875 W) while mechanical hp is 550 ft·lbf/s (745.6999 W), about 1.4% more. Dividing the same wattage by a smaller unit gives a bigger number: 300 hp equals 304.2 PS.
How do I convert kW to BTU per hour?
Multiply kilowatts by 3,412.14. One kWh is 3.6 MJ and one BTU is 1,055.05585262 J, so 1 kW sustained for an hour delivers 3,412.14 BTU. A 2 kW heater is therefore about 6,824 BTU/h.
What is a ton of refrigeration in kW?
3.5169 kW. The ton is the cooling rate that melts one short ton (2,000 lb) of ice in 24 hours, standardized as exactly 12,000 BTU/h. A 3 ton home AC therefore moves about 10.55 kW of heat.
Why is an air conditioner rated in BTU?
US practice quotes the heat the unit can move per hour in BTU, with the per hour usually dropped in marketing. It describes cooling capacity, not electrical draw; the electricity consumed is lower by the efficiency factor (EER or SEER).
Is kW the same as kWh?
No. kW is power, the rate of energy flow; kWh is energy, a rate held for a time. A 3 kW kettle running for 10 minutes uses 0.5 kWh. This page converts power units; energy has its own converter.
Is there an in-depth guide to the Power Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.