Pressure Converter
Convert pressure between psi, bar, kPa, MPa, atm, Torr, mmHg and inHg with the exact factor 1 psi = 6.894757 kPa, shown step by step.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Pressure Converter?
The placard inside your car door says 32 psi, the pump at a European station reads in bar, and the owner manual lists kPa. A dive computer works in bar while the tables you learned used atmospheres. A US weather report quotes inches of mercury where the rest of the world uses hectopascals. One pressure, many dialects: enter the value you have and this converter writes it in all of them at once.
Select a target unit and the calculation steps appear with the exact definition on each line: 1 psi = 6,894.757293 Pa (one pound-force on one square inch), 1 atm = 101,325 Pa, 1 bar = 100,000 Pa, 1 Torr = 101,325/760 Pa. Where units are nearly but not exactly equal, like Torr and mmHg, the table keeps them apart rather than pretending they match.
The conversion happens entirely in your browser; the numbers never leave your device. Below the result, the report bar turns the full table into a CSV or PDF, and the share link carries your input so a colleague opens the identical conversion.
- One reading converted across psi, bar, kPa, MPa, atm, Torr, mmHg, inHg and millibar together
- Worked steps through pascals for any unit you pick, exact factor on each line
- Exact legal definitions: 1 psi = 6,894.757293 Pa, 1 atm = 101,325 Pa
- Torr and conventional mmHg listed separately, as the standards define them
- Report bar with CSV and PDF export and a link that shares the exact input
Updated
How to use the Pressure Converter
- Type the pressure reading, for example 2.5.
- Pick its unit, such as bar. Every other unit updates at once: psi, kPa, MPa, atm, Torr, mmHg, inHg and millibar.
- Select any target row to expand the worked steps, which pass through pascals with the exact factor named.
- Try the preset values for common cases: a tire placard, one atmosphere, or 101.325 kPa.
- Download the table as CSV or PDF from the report bar, or copy the share link for your exact input.
Worked examples
Tire placard: 32 psi in kPa and bar
Input
32 psi
Output
220.63 kPa
32 × 6,894.757293 Pa = 220,632.23 Pa, which is 220.63 kPa or 2.2063 bar. European pumps marked in bar need about 2.2 for this placard.
One standard atmosphere in everything
Input
1 atm
Output
101.325 kPa = 14.696 psi = 760 Torr
The atm is defined as exactly 101,325 Pa, so the table shows 1.01325 bar, 14.6959 psi, 760 Torr exactly and 29.921 inHg. Divers call this one bar as a rough rule; the table shows the 1.3% gap.
US barometer reading: 30.12 inHg in millibars
Input
30.12 inHg
Output
1,019.98 mbar
One inch of mercury is 3,386.389 Pa, so 30.12 inHg is 101,998 Pa, or 1,019.98 hPa. A reading above the 1,013.25 hPa standard signals high pressure and settled weather.
Dive gauge: 2.5 bar in psi
Input
2.5 bar
Output
36.259 psi
2.5 bar is 250,000 Pa; dividing by 6,894.757293 gives 36.259 psi. At roughly 15 m of seawater depth the absolute pressure is near this value.
Background and insight
The pascal, one newton per square meter, is the SI unit, but it is small: atmospheric pressure is about 101,325 of them. Practical fields each scaled it their own way. Meteorology took the hectopascal, numerically identical to the older millibar. Engineering took the kilopascal and megapascal. The bar, exactly 100,000 Pa, survives on tire pumps and dive gear because it sits conveniently close to one atmosphere.
The pound per square inch inherits its exactness from two 1959 definitions: the pound-force (0.45359237 kg × 9.80665 m/s²) divided by a square inch (0.0254 m squared) gives exactly 6,894.757293168361 Pa. The standard atmosphere was fixed at 101,325 Pa by the CGPM in 1954, so 1 atm is 14.6959 psi.
Mercury units carry the history of the barometer. The Torr was redefined as exactly 1/760 of an atmosphere (about 133.32237 Pa), while the conventional millimeter of mercury is 133.322387 Pa, defined through the density of mercury under standard gravity. They differ by less than one part in seven million, harmless for weather, but vacuum and medical instrument specifications name one or the other deliberately, and this converter lists both.
Common use cases
Tires and inflation
Match a psi door placard to a pump in bar or kPa for cars, bikes and motorcycles.
Weather watching
Compare US barometer readings in inHg with the hPa or millibar values used everywhere else.
Diving
Move between bar on the gauge and atmospheres in the dive tables, with the real 1.3% difference kept visible.
Process and vacuum work
Convert gauge and instrument specs across psi, kPa, MPa, Torr and mmHg without a rounding table.
Tips and limitations
- Decide first whether your reading is gauge or absolute. A tire gauge reads pressure above atmospheric (psig); dive and weather figures are absolute. Converters change units, not reference points.
- Bar and atmosphere are close but not equal: 1 atm = 1.01325 bar. For tire inflation the gap rarely matters; for calibration it does.
- Hectopascal and millibar are the same size, so weather charts in hPa read identically in mbar.
- Blood pressure stays in mmHg by convention everywhere, even in otherwise fully metric countries.
- For quick mental tire math, 1 bar is about 14.5 psi, so 2.2 bar is roughly 32 psi.
Sources and further reading
- NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Appendix B gives psi, atm, Torr and mmHg in pascals
- The International System of Units (SI Brochure), Bureau International des Poids et Mesures. The pascal and the non-SI units accepted for use
- Pound per square inch, Wikipedia
- Standard atmosphere (unit), Wikipedia. The 1954 CGPM definition of 101,325 Pa
Frequently asked questions
How many kilopascals are in one psi?
6.894757293 kPa. The figure is exact by definition: one pound-force (4.4482216152605 N) spread over one square inch (0.00064516 m²) is 6,894.757293168361 Pa.
Is 1 bar the same as 1 atmosphere?
No. A bar is exactly 100,000 Pa while the standard atmosphere is exactly 101,325 Pa, so 1 atm = 1.01325 bar. The 1.3% gap is often ignored in diving rules of thumb but matters in calibration and lab work.
What is 32 psi in bar?
2.206 bar. Multiply 32 by 6,894.757293 Pa to get 220,632 Pa, then divide by 100,000. Most European tire pumps marked in bar would be set to 2.2 for this placard.
What is the difference between Torr and mmHg?
The Torr is defined as exactly 1/760 of a standard atmosphere, about 133.32237 Pa. The conventional millimeter of mercury is 133.322387 Pa, defined from the density of mercury under standard gravity. They differ by under one part in seven million, so weather and medicine treat them as equal, but vacuum specifications name one deliberately.
Are hPa and millibar the same?
Yes, numerically identical: both are 100 Pa. Meteorology adopted the hectopascal so that old millibar charts kept the same numbers; 1,013.25 hPa and 1,013.25 mbar are the same standard atmosphere.
What does psig mean compared with psi?
psig is gauge pressure, measured above the surrounding atmosphere, which is what tire and compressor gauges read. psia is absolute pressure, measured from vacuum. At sea level psia is roughly psig plus 14.7. Convert the number first, then keep the g or a suffix with it.
Is there an in-depth guide to the Pressure Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.