Speed Converter

Convert a speed between mph, km/h, knots, m/s, ft/s and Mach in one step, with exact factors like 1 mph = 0.44704 m/s and worked conversion steps.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Speed Converter?

A rental car abroad shows km/h while the speed limit sign in your head is in mph. A marine forecast gives the wind in knots. A treadmill set in mph has to match a training plan written in minutes per kilometer. Type the one speed you have and this converter returns it in every other unit at the same time: meters per second, km/h, mph, knots, feet per second and Mach number.

Pick any unit as the target and the working steps show the exact definition used, for example 1 mph = 0.44704 m/s from the 1959 international yard and pound agreement, and 1 knot = 1,852 meters per hour, the international nautical mile. Nothing is rounded away behind the scenes; the steps show the value through the base unit so you can check each line.

Everything runs in your browser and no value you type is uploaded anywhere. The report bar under the result exports the full conversion table as CSV or PDF, and a share link reproduces your exact input for anyone you send it to.

  • One input converted to m/s, km/h, mph, knots, ft/s and Mach at once
  • Worked steps for any target unit with the exact legal factor shown
  • Exact definitions: 1 mph = 0.44704 m/s, 1 knot = 1,852 m/h
  • Mach based on the ICAO sea-level standard of 340.294 m/s, stated on the page
  • CSV and PDF export plus a share link that reproduces the input
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Speed Converter

  1. Enter the speed you know, for example 100.
  2. Choose its unit, such as kilometers per hour. The table instantly shows the value in every other speed unit.
  3. Click any row to see the worked steps for that target unit, with the exact factor through meters per second.
  4. Use the example buttons for common inputs like a 100 km/h limit or the 343 m/s speed of sound.
  5. Export the table as CSV or PDF from the report bar, or copy the share link to send your exact conversion.

Worked examples

Motorway limit: 100 km/h in mph

Input

100 km/h

Output

62.137 mph

100 km/h is 100/3.6 = 27.778 m/s. Dividing by the exact mph factor 0.44704 gives 62.137 mph. The same input reads 53.996 knots and 27.778 m/s in the table.

Wind forecast: 10 knots in km/h

Input

10 kn

Output

18.52 km/h

One knot is exactly 1,852 meters per hour, so 10 knots is exactly 18.52 km/h, which is 11.508 mph. A 10 knot breeze is a gentle sailing wind.

Treadmill pace: 10 mph in km/h

Input

10 mph

Output

16.09344 km/h

Because the mile is exactly 1,609.344 m, 10 mph converts to km/h with no rounding at all: 16.09344 km/h, or 4.4704 m/s. That is a 6 minute mile pace.

Airliner cruise: Mach 0.85 at the reference sound speed

Input

Mach 0.85

Output

1,041.3 km/h

0.85 × 340.294 m/s = 289.25 m/s, which the table shows as 1,041.30 km/h, 647.03 mph and 562.26 knots. At cruise altitude the true figure is lower because sound travels slower in cold air.

Background and insight

The SI unit of speed is the meter per second. Kilometers per hour relate to it by a clean ratio: divide km/h by 3.6 to get m/s. The mile per hour depends on the statute mile, fixed at exactly 1,609.344 meters in 1959, which makes 1 mph exactly 0.44704 m/s and gives the tidy identity that 60 mph is exactly 88 feet per second.

The knot is one nautical mile per hour. The nautical mile began as one minute of latitude along a meridian, which is why ships and aircraft still use it: distances on charts can be read straight off the latitude scale. The international nautical mile was fixed at exactly 1,852 meters in 1929, so a knot is 1852/3600 m/s, about 0.5144 m/s.

Mach number is not a fixed unit at all; it is a ratio of the true airspeed to the local speed of sound, which falls as air gets colder. This tool uses 340.294 m/s, the speed of sound at sea level and 15 °C in the ICAO standard atmosphere, and says so next to the unit. An airliner cruising at Mach 0.85 at altitude is actually slower over the ground than the sea-level figure suggests, because the sound speed up there is lower.

Common use cases

  • Driving abroad

    Read a km/h limit or speedometer in mph, or the reverse, before and during a trip.

  • Sailing and aviation

    Turn knots from marine and aviation forecasts into km/h or mph you can picture.

  • Running and cycling

    Match a treadmill in mph to a plan in km/h or m/s, or convert a race speed between unit systems.

  • Physics and engineering homework

    Move between m/s, ft/s and km/h with the exact factors and the steps written out for the submission.

Tips and limitations

  • km/h to m/s is a division by 3.6; m/s to km/h is a multiplication by 3.6. No other factor is needed between the two.
  • A quick mental check for mph to km/h: multiply by 1.6. The exact factor is 1.609344.
  • Knots to mph is almost a 15% markup: 1 knot = 1.15078 mph. Weather services mixing the two is a common source of exaggerated wind reports.
  • Mach numbers only compare fairly at the same altitude and temperature. Quote the m/s or km/h value when the context is not aviation.
  • 60 mph = 88 ft/s exactly, a handy anchor for stopping-distance and projectile problems in US customary units.

Sources and further reading

  1. NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Appendix B lists the exact conversion factors for mph, ft/s and the nautical mile
  2. The International System of Units (SI Brochure), Bureau International des Poids et Mesures
  3. Knot (unit), Wikipedia. History of the nautical mile and the 1929 international definition

Frequently asked questions

How many km/h is 100 mph?

160.9344 km/h exactly. The statute mile has been exactly 1,609.344 meters since the 1959 international agreement, so mph to km/h conversions terminate with no rounding.

How fast is one knot in mph?

One knot is 1.15078 mph. A knot is one nautical mile (exactly 1,852 m) per hour, and dividing 1852/3600 m/s by the mph factor 0.44704 m/s gives 1.1507794 mph.

Why do ships and planes use knots?

The nautical mile was defined as one minute of latitude, so on a chart a distance in nautical miles can be measured directly against the latitude scale. Speeds in nautical miles per hour, knots, make time and distance arithmetic on charts immediate. The modern value is fixed at exactly 1,852 m.

Why is the km/h to m/s factor 3.6?

There are 1,000 meters in a kilometer and 3,600 seconds in an hour, and 3600/1000 = 3.6. So dividing km/h by 3.6 gives m/s: 90 km/h is 25 m/s exactly, and multiplying m/s by 3.6 goes back.

What speed is Mach 1?

At sea level and 15 °C in the ICAO standard atmosphere, Mach 1 is 340.294 m/s, which is 1,225.06 km/h or 761.22 mph. The speed of sound falls with temperature, so Mach 1 at a cold cruise altitude is a lower true airspeed; this converter states the reference condition it uses.

Is 1 m/s faster than 1 mph?

Yes, more than twice as fast. 1 m/s is 2.23694 mph (the reciprocal of 0.44704), which is also 3.6 km/h. A brisk human walk is about 1.4 m/s.

Is there an in-depth guide to the Speed Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.