Wind Speed Converter

Convert a wind speed between knots, km/h, mph, m/s and ft/s with the exact 1.852 km/h knot, and see where gale and hurricane thresholds fall in each unit.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Wind Speed Converter?

Marine forecasts and aviation reports give wind in knots, a European weather app shows km/h or m/s, and a US hurricane bulletin talks in mph. When a sailing forecast says 25 knots, this converter tells you that is 46.3 km/h, 28.8 mph and 12.9 m/s, so you can judge the same wind whichever dialect your forecast speaks.

The knot earned its place as the native wind unit at sea and in the air: it is one nautical mile, exactly 1,852 meters, per hour, and nautical miles are what charts and flight plans are drawn in. Every conversion here passes through that exact definition and the equally exact 0.44704 m/s mile per hour, with the arithmetic printed line by line rather than hidden behind a rounded factor.

The wind figure you type stays on your device; the page computes everything locally with no upload. Each worked step cites the exact definition it uses, the report bar below the result saves the full table as CSV or PDF, and the share link restores your input for whoever opens it.

  • Knots, km/h, mph, m/s and ft/s converted from a single input
  • Exact definitions used throughout: 1 kn = 1,852 m/h, 1 mph = 0.44704 m/s
  • Worked steps through meters per second for any target unit
  • Presets at the gale and hurricane-force thresholds of 34 and 64 knots
  • CSV and PDF export plus a share link that reproduces your conversion
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Wind Speed Converter

  1. Enter the wind speed from your forecast, instrument or report.
  2. Pick the unit it came in: knots, km/h, mph, m/s or ft/s.
  3. Read the speed in every other unit in the results table.
  4. Open any target row for the worked steps through meters per second, exact factors included.
  5. Download the table as CSV or PDF from the report bar, or copy the share link.

Worked examples

Sailing forecast

Input

25 kn

Output

46.3 km/h = 28.8 mph

25 × 1.852 = 46.3 km/h exactly, and dividing the 12.861 m/s equivalent by 0.44704 gives 28.77 mph. On the Beaufort scale 25 knots sits in force 6, a strong breeze that puts whitecaps everywhere.

Nordic weather app

Input

10 m/s

Output

19.44 kn = 36 km/h = 22.37 mph

Multiplying by 3.6 gives exactly 36 km/h; dividing by 1852/3600 gives 19.438 knots. Scandinavian services quote m/s, and 10 m/s is force 5, a fresh breeze.

Hurricane threshold

Input

64 kn

Output

118.5 km/h = 73.7 mph

64 knots is where hurricane force begins. It converts to 118.53 km/h and 73.65 mph; agencies publish the rounded 119 km/h and 74 mph, which is where the familiar 74 mph figure comes from.

Pleasant sailing breeze

Input

15 kn

Output

27.78 km/h = 7.72 m/s

15 × 1,852 m over 3,600 s gives 7.717 m/s, which is 27.78 km/h and 17.26 mph: force 4, the moderate breeze most dinghy sailors would pick for an afternoon.

Background and insight

The name knot is literal: sailors paid out a line knotted at fixed intervals behind the ship and counted knots passing through their hands against a sand glass. The unit outlived the rope because the nautical mile matches one minute of latitude, keeping chart work simple, and the 1929 international definition fixed it at 1,852 m. Admiral Francis Beaufort's 1805 scale added a second language for wind: force numbers from 0 to 12 tied to observable sea states, later pinned to measured speed bands. Force 6, a strong breeze, is 22 to 27 knots; force 8, a gale, begins at 34 knots; force 12, hurricane force, begins at 64 knots.

Those thresholds explain the odd-looking numbers in storm warnings. A tropical storm begins at 34 knots of sustained wind and a hurricane at 64 knots; converted, those are 39 and 74 mph, 63 and 119 km/h, which is why US bulletins quote 39 and 74 rather than rounder figures. The Saffir-Simpson categories continue in the same converted steps, with Category 1 spanning 64 to 82 knots.

Two conventions change the number before any unit conversion does. Forecast winds are sustained averages measured at 10 m above ground, with gusts quoted separately and typically 20 to 40% higher. And the averaging window differs by agency: the US National Hurricane Center uses a 1-minute mean while most other services follow the WMO 10-minute mean, so the same cyclone can carry two different official intensities. Convert units after you know which convention a figure uses.

Common use cases

  • Sailing and boating

    Read coastal and offshore forecasts in knots against your own feel for km/h or mph winds.

  • Storm tracking

    Compare a hurricane bulletin in mph with coverage abroad quoting km/h or m/s for the same system.

  • Aviation and drones

    Check METAR winds in knots against a drone or aircraft limit written in m/s or mph.

  • Cycling, running and events

    Judge whether a forecast headwind in one unit crosses the threshold you plan around in another.

Tips and limitations

  • Check whether a figure is sustained wind or a gust before converting; gusts in the same report run 20 to 40% higher than the mean.
  • Doubling knots almost gives mph: the exact relation is 1 kn = 1.15078 mph, so 20 knots is 23 mph, not 40.
  • Knots to km/h is a clean multiply by 1.852 with no rounding, the easiest of these conversions to do exactly in your head as roughly double minus 8%.
  • A US hurricane intensity (1-minute mean) and a WMO agency intensity (10-minute mean) for the same storm differ by convention, not by conversion error.
  • Beaufort force numbers label speed bands, not single speeds; converting the band edges (34 kn for gale, 64 kn for hurricane force) is more honest than converting a middle value.

Sources and further reading

  1. Beaufort scale, Wikipedia. The force bands and their speed ranges in knots, km/h and mph
  2. Saffir-Simpson Hurricane Wind Scale, NOAA National Hurricane Center. Category thresholds in knots, mph and km/h
  3. NIST Special Publication 811: Guide for the Use of the International System of Units, NIST. Exact values of the knot and the mile per hour

Frequently asked questions

How many km/h is 20 knots of wind?

37.04 km/h, since each knot is exactly 1.852 km/h. The same wind is 23.0 mph and 10.3 m/s, and sits at the top of Beaufort force 5.

What wind speed is a gale?

Gale force on the Beaufort scale is force 8, beginning at 34 knots of sustained wind: 63 km/h, 39 mph or 17.5 m/s. Forecasters issue gale warnings against that threshold, not against gusts.

What wind speed counts as a hurricane?

Sustained winds of 64 knots or more. That converts to 73.65 mph and 118.5 km/h, which agencies round to the published thresholds of 74 mph and 119 km/h. Below that, from 34 knots up, a system is a tropical storm.

Why does my marine forecast use knots when the land forecast uses km/h?

Charts measure distance in nautical miles, and a knot is one nautical mile per hour, so navigation arithmetic stays in one unit at sea and in the air. Land forecasts use whatever the country drives in, km/h or mph, and several European services use m/s.

What is Beaufort force 6 in km/h and mph?

Force 6, a strong breeze, covers 22 to 27 knots: about 39 to 50 km/h or 25 to 31 mph. It is the band where sailing turns hard work and umbrellas stop cooperating.

Are forecast wind speeds measured at ground level?

No, the standard is 10 m above open ground, where wind is markedly stronger than at head height. An anemometer on a fence post will read below the forecast figure even when the forecast is right.

Is a gust converted the same way as sustained wind?

The arithmetic is identical; only the meaning differs. A gust is a few seconds' peak while the sustained figure is a 1- or 10-minute average, so convert each separately and never compare a gust in one unit with a mean in another.

Is there an in-depth guide to the Wind Speed Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.