Density Converter

Convert density between kg/m³, g/cm³, g/mL, kg/L, lb/ft³, lb/gal and oz/in³. Water is 1 g/cm³, which is 1,000 kg/m³ and 62.43 lb/ft³.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Density Converter?

Enter a density in any common unit and get it back in all seven at once: kilograms per cubic meter, grams per cubic centimeter, grams per milliliter, kilograms per liter, pounds per cubic foot, pounds per US gallon and ounces per cubic inch. Water anchors the scale at 1 g/cm³, which is 1,000 kg/m³, 62.43 lb/ft³ and 8.345 lb per US gallon; structural steel sits near 7.85 g/cm³ and mercury at 13.5 g/cm³, dense enough that iron floats on it.

The metric units differ only by powers of ten, and three of them are numerically identical: 1 g/cm³ = 1 g/mL = 1 kg/L, because a milliliter is defined as a cubic centimeter. The imperial factors are exact chains of definitions: 1 lb/ft³ = 16.018463373960138 kg/m³ and 1 lb/US gal = 119.82642731689663 kg/m³, from the avoirdupois pound (0.45359237 kg) and the respective volumes.

All conversion happens in your browser and your inputs stay on your machine. Pick the unit your datasheet or recipe needs and the working steps show the exact factor applied; the report bar then exports every converted value to CSV or PDF, and the share link reproduces the page with your density already entered.

  • Seven density units converted in one pass, metric and imperial together
  • Step-by-step working with exact factors such as 1 lb/ft³ = 16.018463 kg/m³
  • Numerically linked metric units (g/cm³, g/mL, kg/L) handled without rounding drift
  • Report bar export of the whole table to CSV or PDF
  • Client-side only, with a link that reopens your conversion for anyone you send it to
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Density Converter

  1. Enter the density from your material table, datasheet, safety sheet or recipe.
  2. Select the unit it is quoted in, such as g/cm³ or lb/ft³.
  3. Read the equivalent in all seven units from the conversion table.
  4. Choose a target unit to open the steps showing the exact factor, for example 1 lb/ft³ = 16.0185 kg/m³.
  5. Download the table as CSV or PDF or copy the share link from the report bar.

Worked examples

Water across the units

Input

1 g/cm³

Output

1,000 kg/m³ = 62.43 lb/ft³ = 8.345 lb/gal

One gram per cubic centimeter is 1,000 kg/m³ because there are a million cubic centimeters in a cubic meter and a thousand grams in a kilogram. Dividing by 16.018463 gives 62.43 lb/ft³, and by 119.826427 gives 8.345 lb per US gallon, the old "a gallon of water is about 8.3 pounds" rule.

Structural steel for a US handbook

Input

7,850 kg/m³

Output

490.06 lb/ft³ = 7.85 g/cm³

7,850 ÷ 16.018463373960138 = 490.06, matching the 490 lb/ft³ figure printed in US structural tables. The g/cm³ value just shifts the decimal three places.

Mercury from a physics table

Input

13,546 kg/m³

Output

13.546 g/cm³ = 845.65 lb/ft³

Mercury near 20 °C is about 13,546 kg/m³, thirteen and a half times water. In imperial terms that is 845.65 lb/ft³: a cubic foot of mercury outweighs four adults.

Fuel density for a weight estimate

Input

0.74 g/cm³

Output

740 kg/m³ = 6.18 lb/gal

Gasoline near 0.74 g/cm³ is 740 kg/m³, and 740 ÷ 119.82642731689663 = 6.18 lb per US gallon. A full 15-gallon tank therefore adds about 93 lb to the car.

Background and insight

The gram was originally defined as the mass of one cubic centimeter of water at its densest, near 4 °C, which is why water lands so neatly at 1 g/cm³ and why specific gravity, density relative to water, is numerically equal to density in g/cm³. The modern SI defines mass independently, and real water at room temperature is about 0.9982 g/cm³, a 0.18 percent gap that matters in lab work but rarely in engineering estimates.

Material tables make the unit zoo visible. Steel is quoted as 7,850 kg/m³ in Eurocode-style references but 490 lb/ft³ in US structural handbooks, and both describe the same alloy family. Aluminum runs about 2.70 g/cm³, concrete about 2.4, and mercury 13.53 g/cm³ at room temperature, the figure behind barometers: a 760 mm column of mercury balances the whole atmosphere.

The gallon units need care because the US and imperial gallons differ. This converter uses the US gallon of 231 cubic inches (3.785411784 L exactly), so water weighs 8.345 lb per gallon here; the imperial gallon was defined the other way around, as the volume of 10 lb of water, so UK sources quote about 10.02 lb per gallon. Petroleum and brewing documents mix the two freely, and checking which gallon a figure assumes prevents a 20 percent error.

Common use cases

  • Material and structural tables

    Restate steel, aluminum or concrete densities between kg/m³ references and lb/ft³ handbooks.

  • Shipping and fuel weight

    Turn a liquid density into lb/gal or kg/L to estimate the weight of a tank, drum or load.

  • Lab and chemistry work

    Move between g/mL on a reagent bottle and kg/m³ in an SI calculation without decimal slips.

  • 3D printing and casting

    Convert filament or alloy density to g/cm³ to predict part mass from sliced volume.

Tips and limitations

  • g/cm³, g/mL and kg/L are the same number; pick whichever the audience expects and skip the arithmetic.
  • kg/m³ is always 1,000 times the g/cm³ figure, a fast check that a converted value is in the right ballpark.
  • Specific gravity has no units; multiply it by 1,000 to get kg/m³ or read it directly as g/cm³.
  • Check which gallon a lb/gal figure uses: this tool uses the 231 in³ US gallon, and imperial-gallon sources run about 20 percent higher.
  • Density moves with temperature, typically a few tenths of a percent per 10 °C for liquids, so quote the temperature with any precise figure.

Sources and further reading

  1. NIST Special Publication 811: Guide for the Use of the International System of Units, NIST. Exact factors for pound, cubic foot and gallon conversions
  2. SI Brochure: The International System of Units (SI), BIPM. The kilogram, the liter and derived density units
  3. Density, Wikipedia. Material density tables and temperature dependence

Frequently asked questions

How do you convert g/cm³ to kg/m³?

Multiply by 1,000. A cubic meter holds 1,000,000 cubic centimeters and a kilogram holds 1,000 grams, so the net factor is 1,000: steel at 7.85 g/cm³ is 7,850 kg/m³.

What is the density of water in lb/ft³?

About 62.43 lb/ft³ at maximum density (1,000 kg/m³ ÷ 16.018463). At room temperature it is closer to 62.3 lb/ft³, since water at 20 °C is 998.2 kg/m³. US plumbing and HVAC references often round to 62.4.

Are g/mL and g/cm³ the same?

Yes, exactly. The milliliter has been defined as one cubic centimeter since 1964, so 1 g/mL = 1 g/cm³ = 1 kg/L. Reagent bottles tend to print g/mL while material tables prefer g/cm³.

How much does a gallon of gasoline weigh?

Around 6.2 lb for a US gallon. Gasoline is roughly 0.74 g/cm³ (740 kg/m³), and 740 ÷ 119.826427 = 6.18 lb/gal. Diesel is denser at about 0.85 g/cm³, so a US gallon of it weighs near 7.1 lb.

How do I turn specific gravity into a density?

Specific gravity is density divided by water, so read it as g/cm³ directly or multiply by 1,000 for kg/m³. A battery acid specific gravity of 1.265 means 1.265 g/cm³, which is 1,265 kg/m³ or 78.98 lb/ft³.

Does this converter use the US or imperial gallon?

The US gallon of exactly 231 cubic inches (3.785411784 L), giving 1 lb/gal = 119.82642731689663 kg/m³. Figures based on the imperial gallon (4.54609 L) come out about 20 percent lower in lb/gal for the same liquid, so label which gallon you mean.

Why does the density of a liquid change with temperature?

Warming a liquid expands its volume while the mass stays fixed, so density falls. Water drops from 999.97 kg/m³ at 4 °C to 998.2 at 20 °C and 958.4 at boiling; precise tables therefore state a reference temperature, commonly 4 °C, 15 °C or 20 °C.

Is there an in-depth guide to the Density Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.