United Kingdom version. Metric runs with 1.83 m (6 ft) panels, 2.4 m posts, 20 kg bags of post mix, and the 1 m and 2 m planning limits for fences in England from the Planning Portal. US version
Fence Panel Calculator (UK)
Count 6 ft fence panels, posts and 20 kg bags of post mix for a garden fence in metres, with gates, corners, post lengths and the planning height limits in England.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Fence Calculator?
Most UK garden fences are 1.83 metre (6 ft) panels between timber or concrete posts. The panel fixes between the posts, so the spacing you enter is the panel width plus one post width: about 1.93 metres with 100 mm posts. Entering 1.83 instead overcounts: on a 25 metre boundary it gives 14 panels and 15 posts, where 13 panels and 14 posts will do.
For a 1.8 metre fence the tool adds the 600 mm in the ground to the height and gives a post length of 2.4 metres, the 8 ft post sold for 6 ft fences. Concrete per hole is worked out from the hole size minus the post, then turned into bags of the size you buy.
Before you order, check the height. In England a fence, gate or wall needs planning permission if it is over 1 metre next to a road used by vehicles (or its footway), or over 2 metres anywhere else, and these rights can be removed for listed buildings and some estates.
- Any number of straight runs with gates, open or closed layouts
- Rails and pickets or prefabricated panels
- Concrete per post and in total, in 40, 50, 60 and 80 lb or 20 and 25 kg bags
- Run-by-run table with the real section length for layout
- Material cost and post length; runs in the browser with a share link
Updated
How to use the Fence Calculator
- Measure each straight side of the fence in metres and enter one run per side, with any gates in that run.
- Choose fence panels and set the post centres to the panel width plus the post width (1.83 m panel + 0.1 m post = 1.93 m).
- Enter the fence height. With 600 mm of post in the ground, a 1.8 m fence needs 2.4 m posts.
- Set the post width, hole diameter and depth in millimetres, then pick 20 kg or 25 kg bags.
- For feather edge boards, choose rails and boards and enter the cover width of each board (its width minus the overlap) with a gap of 0.
Worked examples
25 m boundary in 6 ft panels
Input
One 25 m run, panels at 1.93 m post centres, 1.8 m high, 100 mm posts in 250 mm holes 600 mm deep, 20 kg bags
Output
13 panels, 14 posts of 2.4 m, about 2.5 bags a post (3 if you mix post by post), 36 bags in all
Each hole holds 23.5 litres of concrete once the post is in. Rapid-set post mix yields less per bag than general-purpose concrete, so check the yield printed on the bag before relying on the count.
Three sides of a back garden
Input
Runs of 10 m, 6 m and 10 m, open at the house, panels at 1.93 m centres
Output
16 panels and 17 posts; 43 bags of 20 kg
Each run is rounded up to whole panels on its own, so the two 10 m sides take 6 panels each and the back 4. The corner posts are shared, which is why there is only one more post than panels.
Low picket fence at the front
Input
8 m run with a 0.9 m gate, 0.9 m high, 70 mm pales with 50 mm gaps, 2 rails, 75 mm posts in 250 mm holes 450 mm deep
Output
6 posts of 1.35 m, 9 rails, 63 pales (with 5% extra), 13 bags of 20 kg
A front fence under 1 metre next to the pavement stays within the height allowed without planning permission in England.
Background and insight
Post spacing is a maximum, not a rule that every section must hit. Wood privacy fences are commonly built with posts 6 to 8 feet on centre, because 8 foot rails are a stock length and longer spans sag. When a run does not divide evenly, the calculator rounds the number of sections up and spreads the length evenly, so a 50 foot run at 8 foot maximum spacing becomes 7 sections of 7.14 feet instead of six full sections and a stub.
Gates are assumed to be spaced evenly within their run. That gives the fewest posts; a gate placed off-centre can need one more section on one side, so check the run table against your plan. Each gate needs its own pair of posts, which should be set deeper or larger because a swinging gate loads the hinge post sideways.
Concrete is the hole volume minus the part of the hole the post fills. A common rule from post and concrete manufacturers is a hole about three times the post width and at least a third to a half as deep as the post stands above ground, and always below the local frost line so frost heave cannot lift the post. Bag yields come from published data: an 80 lb bag of concrete mix makes about 0.60 cubic feet and a 50 lb bag of fast-setting mix about 0.375 cubic feet.
Common use cases
Privacy and picket fences
Get the post, rail and picket list for a wood fence before ordering lumber.
Panel fences
Count vinyl or wood panels and the posts between them for a yard with several sides.
Gates and corners
See how gates and changes of direction change the post count instead of guessing.
Concrete order
Buy the right number of bags for every post hole in one trip.
Tips and limitations
- Concrete posts with gravel boards keep timber panels off the soil; the gravel boards are counted the same way as panels, one per bay.
- Fences are not always the responsibility of the owner on the side with the posts. Check your title plan and deeds before replacing a boundary fence.
- Exposed gardens need stronger posts or closer spacing. Panels act like sails in high winds.
- Mark underground cables and pipes before digging, especially near the house and the front boundary.
Sources and further reading
- Fences, gates and garden walls, Planning Portal. The 1 metre and 2 metre limits for permitted development in England.
- Planning permission: fences, gates and garden walls, Welsh Government
- Manual handling at work, Health and Safety Executive. Lifting 20 kg and 25 kg bags and concrete posts.
Frequently asked questions
How many fence panels do I need for 25 metres?
With standard 1.83 m (6 ft) panels on 100 mm posts, each bay is about 1.93 m, so 25 m needs 13 panels and 14 posts. Measure your posts: thicker posts or slotted concrete posts change the bay width slightly.
How tall can my garden fence be without planning permission?
In England, up to 2 metres, or up to 1 metre where it is next to a highway used by vehicles or its footway. Permission is also needed for fences around a listed building or where an Article 4 direction or planning condition removes the rights. Wales has similar rules; Scotland and Northern Ireland differ.
How long should fence posts be for a 6 ft fence?
About 2.4 m (8 ft), so that around 600 mm goes into the ground for a 1.8 m fence. The calculator adds the hole depth you enter to the fence height and shows the post length.
How many bags of postcrete per fence post?
It depends on the hole. A 250 mm round hole 600 mm deep around a 100 mm post holds about 23.5 litres of concrete, which is three 20 kg bags of general-purpose concrete. Rapid-set post mix bags yield less, so read the yield on the bag.
Timber or concrete fence posts?
Concrete posts with slots do not rot and suit panel fences on exposed or wet sites, but they are heavy and the bay width is set by the slot. Timber posts are easier to cut and fix. Enter the width of the post you choose so the spacing and concrete are right.
How much does a fence cost per panel?
Prices vary by panel type, height and region, so the calculator uses your own prices per panel, post and bag. Add gravel boards and fixings separately.
Is there an in-depth guide to the Fence Calculator?
Yes. “How to Estimate Fence Posts, Pickets, Rails and Concrete” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.