United Kingdom version. Uses UK brick (215 x 102.5 x 65 mm) and block (440 x 215 x 100 mm) sizes with 10 mm joints, 25 kg cement bags and half-brick or one-brick walls. US version
Brick and Block Calculator (UK)
How many 215 x 65 mm bricks or 440 x 215 mm blocks for a half-brick or one-brick wall, with mortar, 25 kg cement bags and sand at 1:4 to 1:6.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Brick and Block Calculator?
A UK brick is 215 x 102.5 x 65 mm, and with a 10 mm joint it occupies 225 x 75 mm of wall, which is where the rule of 60 bricks per square metre comes from (59.26 exactly). A concrete block of 440 x 215 mm takes about 10 per square metre. This version starts with those sizes, 10 mm joints and 25 kg cement bags.
A half-brick wall is one leaf, 102.5 mm thick; a one-brick wall is two leaves bonded together, 215 mm thick, with the joint between them filled. For a cavity wall of brick outside and block inside, run the calculator once for each leaf. Subtract doors and windows, add 5% for cuts and breakages, and the tool gives the bricks to order, the mortar, the cement bags and the sand.
- US modular and standard brick, CMU 6, 8 and 12 in, UK brick and block, Indian modular and traditional brick
- Door and window openings, single or double wythe and collar joint
- Mortar by joint geometry with face-shell bedding for hollow block
- Cement bags and sand for any 1:n mortar, with 70 lb, 94 lb, 50 kg or 25 kg bags
- Waste allowances from BIA Technical Note 10 and cost per unit
Updated
How to use the Brick and Block Calculator
- Choose imperial or metric and enter the wall length and height.
- Enter the number and size of doors and windows to subtract from the wall area.
- Pick a brick or block size, or choose Custom and type the actual dimensions and joint thickness.
- Select single or double wythe, and whether the collar joint is filled with mortar.
- Set the waste allowances, the mortar mix and the cement bag, then read the units, mortar, cement and sand.
Worked examples
Extension outer leaf, 10 x 2.4 m with a door and window
Input
UK brick, half-brick wall, 10 x 2.4 m less a 0.9 x 2.1 m door and a 1.2 x 1.05 m window (3.15 m²), 5% waste, 15% mortar waste, mortar 1:5, 25 kg bags
Output
1,298 bricks; 0.42 m³ of mortar; 6 bags of cement and 0.47 m³ of sand
The net wall is 20.85 m², which at 59.26 per m² is 1,236 bricks before waste. Mortar is figured with 15% extra for droppings.
Inner leaf of the same wall in 100 mm block
Input
UK block 440 x 215 x 100 mm, same 20.85 m², 5% waste, 15% mortar waste, mortar 1:5
Output
217 blocks; 0.16 m³ of mortar; 3 bags of cement
Running the two leaves separately is the way to price a cavity wall. Wall ties, insulation and cavity closers are extra.
One-brick garden wall, 8 m long and 1.2 m high
Input
UK brick, two leaves with the collar joint filled, 8 x 1.2 m, 5% waste, 15% mortar waste, mortar 1:4
Output
1,195 bricks; 0.5 m³ of mortar; 8 bags of cement and 0.53 m³ of sand
A 215 mm wall takes about 119 bricks per square metre. Allow extra for the coping or brick-on-edge course, which this count does not include.
Background and insight
Units per area = 1 / ((length + joint) x (height + joint)). The figures match Table 4 of BIA Technical Note 10: 675 modular brick and 5.5 cubic feet of mortar per 100 square feet at 3/8 in joints, or 8.1 cubic feet per 1,000 brick, and the collar joint adds 3.13 cubic feet per 100 square feet. Those table values exclude waste. BIA suggests adding at least 5% to brick and 15 to 25% to mortar, and it describes the mason's rule of eight bags of masonry cement per 1,000 brick as a very rough estimate.
Concrete masonry units are named by nominal size: an 8x8x16 block is actually 7-5/8 x 7-5/8 x 15-5/8 in, so with a 3/8 in joint it occupies exactly 8 x 16 in and 1.125 blocks fill a square foot. Hollow units are normally laid with face-shell bedding under TMS 602, which uses far less mortar than a full bed, but grouted cells and bond beams need grout that this calculator does not count. In India, IS 1077 sets the modular brick at 190 x 90 x 90 mm, which with 10 mm joints gives exactly 50 per square metre of half-brick wall.
Common use cases
Garden walls and planters
Order pallets of brick or block and enough mortar for a weekend build.
House extensions and veneers
Estimate brick veneer around windows and doors before asking for supplier quotes.
Comparing brick and block
See how many units and how much mortar the same wall needs in modular brick against CMU.
Indian and UK site estimates
Use local brick sizes and 1:4 or 1:6 cement mortar with 50 kg or 25 kg bags.
Tips and limitations
- Buy all the facing bricks for one wall from the same batch where you can, so the colour matches.
- Mortar is often mixed 1:4 to 1:6 cement to building sand with plasticiser; follow the mix your building control or engineer specifies for walls below ground or exposed walls.
- Wet mortar is alkaline like concrete: HSE advises waterproof gloves and washing it off the skin quickly.
Sources and further reading
- Construction hazardous substances: Cement, Health and Safety Executive. Skin protection for wet mortar and concrete.
- Brick Development Association: technical guidance, Brick Development Association. The UK clay brick industry body, with design guides on bonds and mortar.
- Approved Document A: Structure, GOV.UK. Wall thickness and masonry rules for small buildings in England.
Frequently asked questions
How many bricks per square metre in the UK?
About 60 for a half-brick wall (59.26 with 10 mm joints) and about 119 for a one-brick wall. Add 5% for cuts and breakages.
How many blocks per square metre?
About 10 for a standard 440 x 215 mm block with 10 mm joints (9.88 exactly). The block thickness, 100 mm or 140 mm, does not change the count per square metre, only the mortar.
How much mortar for 1,000 bricks?
About 0.3 m³ of wet mortar for a half-brick wall before waste, which with 15% extra is about 0.34 m³. At 1:4 that is about 5.2 bags of 25 kg cement, so buy 6, and 0.36 m³ of sand.
What mortar mix should I use for brickwork?
General brickwork above ground is often laid in 1:5 or 1:6 cement to soft building sand with a plasticiser, and 1:4 for stronger or more exposed work. The Brick Development Association and BS EN 1996 give designations for different exposures.
How do I estimate bricks for a cavity wall?
Treat each leaf separately: bricks for the outer leaf and blocks for the inner leaf, each over the same net area. Add wall ties at the spacing the design gives.
Is there an in-depth guide to the Brick and Block Calculator?
Yes. “How Many Bricks and How Much Mortar? Estimating Masonry Walls” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.